In order type Customizing, you can set the default for when the purchase requisition is created to
immediately, from release, or never. For which combination must you set the default? Order type and planner group Order type and plant Order type and responsible work center Order type and material type.
How the settlement rule for suborder is to be determine in the Customizing setting for order type .
Please choose the correct answer Copy the main order as the settlement receiver Do not copy order Apply CATS None of the above.
You want to set up an external refurbishment process through subcontracting, using material
requirements planning (MRP)? Which of the following must you set in the system? The Special Procurement indicator in the material master record The Subcontracting flag for the refurbishment order type The Material Provision indicator for special stock in the refurbishment order header The Subcontracting flag in the refurbishment order header.
You use the F4 key to...
Choose the correct answer(s). Start another session Obtain technical details for a program Call the SAP Library Show possible input values for an entry field Generate an output request for the current screen.
Which is not the phase of corrective Maintenance
Please choose the correct answer. Notification Planning Control Base.
How many types of catalog are there?
Please choose the correct answer. 2 3 4 5.
What does the structure indicator for a functional location determine?
There are 3 correct answers to this question The functional location type The number of characters for each hierarchy level The edit mask The functional location category The number of hierarchy levels for a particular structure.
What are the three organizational levels?
There are 3 correct answers to this question Analyze Define Assign Collect Damage.
Your customer wants to subdivide the maintenance organization by production responsibility.
What do you use to designate the contact person for coordination between production and plan maintenance?
Please choose the correct answer Plant section Production cost center Work center Controlling area.
What is the info cube dimensions?
Please choose the correct answer. Functional location/equipment Message reader Project analysis Maintenance Controller.
Which of the following always produces up-to-the-minute costing information for maintenance orders?
Please choose the correct answer. A standard analysis from the Plant Maintenance Information System (PMIS) A standard query in SAP Net Weaver Business Warehouse A maintenance order list A shift report based on shift notes.
What is the definition of a Data Source?
Please choose the correct answer All available data of a business transaction type An extraction structure for data transfer to SAP BusinessWarehouse A superordinate term for characteristics, key figures, and units A superordinate term for BI objects that can be analyzed using BEx queries.
Your customer wants to establish a maintenance work center with various activity types, each with a different fixed price.
How do you accomplish this? Please choose the correct answer Create various maintenance activity types with the fixed prices and assign them to the work center Define the activity types for each maintenance planning plant Create various maintenance activity types in each work center and assign a price Define the activity types in Controlling and assign them to the cost center of the work center.
To which maintenance object types can you link a priority type?
There are 2 correct answers to this question The combination of the order category and order type The order type only The notification type only The combination of the notification category and notification type.
The maintenance of a technical system comprises the following tasks:
Please choose the correct answer. Inspection Closed system Construction Project assistance Evaluation.
Which task list can have both external and internal number assignment for the task list group number?
Please choose the correct answer. Bill of material task list Equipment task list General task list Functional location task list.
When a user creates a notification or an order and enters a functional location as the reference object, you want the system to suggest the subordinate equipment automatically.
In addition to setting the reference object view in the order or the notification, what other settings must you make? (There are 2 correct answers to this question) Set View Profiles for Technical Objects in Customizing. Set the Single Installation indicator in the equipment master data record. Set the Single Installation indicator in the Functional Location master data record. Set the Equipment-Installation Allowed indicator in the Functional Location master data record.
Your customer wants to assign personnel to order operations. Which master data must exist in the system?
Please choose the correct answer A requirements profile A personnel indicator in the control key A personnel profile A personnel number.
What options are available in the maintenance order when you analyze costs using value categories?
(There are 2 correct answers to this question.) Display of costs by responsible work center Display of costs by individual operations Display of values in an alternate currency Summary of actual costs across multiple cost elements.
What information does the value category provide in the maintenance order?
Please choose the correct answer. The costs details for individual technical objects The costs by work center The material costs by valuation category A summary of costs for multiple cost elements.
Identify the purpose for creating Bills of Material (There are 3 correct answers to this question) Design bill of material Production bill of material Costing bill of material Structuring Processing.
What does the serial number profile control?
Please choose the correct answer Whether a master batch is used for a serial number Whether split valuation is used to describe the value of an individual part Whether serial numbers must be assigned for a business transaction Whether an individual part is assigned to a special stock.
What do you use to set up a refurbishment order for external refurbishment?
Please choose the correct answer. An external operation that contains a subcontracting indicator and a material item with a materia provision indicator activated An external operation that contains a control key for refurbishment An order type for external refurbishment and an assignment of a material with split valuation An order type for external refurbishment and a material item with item category External refurbishment.
Which of the following item categories can you use in a Plant Maintenance bill of material (BOM)?
There are 2 correct answers to this question Equipment Stock material Non-stock material Assembly Functional location.
Name the data which is created during the monitoring, controlling, regulation and optimization of a technical process.
Please choose the correct answer Document entry Process control system Measurement system WAMP.
Identify the BI content available for Enterprise Asset Management
Please choose the correct answer. Objects Equipments Info cube Task list.
How does SAP make new functions of the SAP ERP application available to customers?
Please choose the correct answer Via enhancement packages Via best practices Via add-ons Via Support Packages.
The SAP GUI offers you the following personalization options:
Choose the 4 correct answer(s). Changing the font size of the SAP GUI within certain limitations Displaying system messages in a dialog box Varying the size of input fields Disabling the display of images in the SAP GUI Users can integrate a picture of their own in the SAP Easy Access screen Use of a personal input history on your front end.
Your customer needs to review costs in a maintenance order at operation level. Which Customizing steps must you perform?
Please choose the correct answer. Set the account assignment indicator for the costing sheet and assign the costing sheet to the order type. Set the account assignment indicator for the settlement profile and assign the settlement profile to the order type. Set the account assignment indicator for the valuation variant and assign the valuation variant to the cost variant. Set the account assignment indicator for the order type and assign the order type to the plants.
At runtime communication between the source system and BW is broken down into the following steps: Identify them
There are 2 correct answers to this question. Loading of data to info provider Running of analysis Master data Projection data BW and SAP.
Capacity planning can be divided in to two basic areas:
There are 2 correct answers to this question Capacity evaluation Capacity leveling Capacity category Capacity orders Capacity manuals.
How is a new functional location initially assigned to its place in the hierarchy?
Please choose the correct answer. Automatically based on the structure indicator Manually using the List Editing transaction Automatically based on the Bill of Material (BOM) Manually using the Install transaction.
When you create a refurbishment order, which reference objects can you use?
There are 3 correct answers to this question Functional location Equipment without serial number Material with serial number Material without serial number Equipment with serial number.
Which of the following are prerequisites for business completion? (Choose two) The order must have actual costs The order must be fully settled The balance of the order must be zero The order must have planned costs.
What information does the value category provide in the maintenance order? The costs details for individual technical objects The costs by work center The material costs by valuation category A summary of costs for multiple cost elements.
Which of the following Customizing settings is required to assign a notification to a maintenance order operation? Assignment of operations to all object list entries active Assignment of order type to notification type Maintain indicator for notification data on order header Create default value profiles for general order data.
When the user creates a maintenance plan for a call object (order), which value in the planning data determines the order type? Priority Maintenance activity type Maintenance planner group Main work center.
A maintenance technician replaces a defective counter with a new counter Before the users can create a standard measuring document for the new counter, what step(s) must they perform? Create a new technical object to represent the new measuring point Create a special measuring document and set the Counter Replacement indicator Dismantle the old measuring point and create a new measuring point Create a new measuring point and change the measuring point from which the measurement reading was transferred.
A user has planned an operation with labor costs and material costs; however, the material cost element is not assigned to a value category. Where do the material costs appear in the value categories for the order? In the overhead value category In a new, automatically created value category In the unassigned value category In the internal activity value category.
Which of the following always produces up-to-the-minute costing information for maintenance orders? A standard analysis from the Plant Maintenance Information System (PMIS) A standard query in SAP NetWeaver Business Warehouse A maintenance order list A shift report based on shift notes.
Which task list can have both external and internal number assignment for the task list group number? Bill of material task list Equipment task list General task list Functional location task list.
Which of the following is a function of deadline monitoring (transaction IP30)? Generate a Logistics Information System (LIS) report for scheduled maintenance items within a specific period Convert maintenance notifications into maintenance orders within a specific period Convert maintenance calls into call objects within a specific period Generate a Logistics Information System (LIS) report for all overdue maintenance calls.
A maintenance plan has a completion requirement. The plan contains five maintenance items that produce five notifications.
Which system status must each notification have before the maintenance call is completed and the next maintenance call can be generated? REL (Released) ATCO (All Tasks Completed) TECO (Technically Completed) NOCO (Notification Completed).
Which of the following control characters is available in the edit mask of the structure indicator? D (numeric characters) M (alphanumeric characters) Y (special characters) A (alpha characters).
Which of the following is a benefit of SAP Solution Manager? It reduces the cost of implementation and continuous improvement It enables central SAP NetWeaver Enterprise Search within all SAP systems It provides common master data management within all SAP systems It reduces the number of systems and operates only one central IT landscape.
Which account assignment category can you specify in a settlement profile? Maintenance planning plant Functional location Equipment Material.
You have selected Confirmation Required in the control key for operations in a maintenance order. One of the operations is already partially confirmed. Which system statuses can the order header display before all operations are finally confirmed? (Choose three) TECO PCNF CRTD CNF CLSD.
How many time-based cycles can you use in a multiple-counter maintenance plan? Three Zero Two One.
What are the purposes of technical object structures? (Choose three) To support Asset Accounting in the description of fixed assets To display the total number of an asset's individual parts from a design engineering perspective To identify objects and object parts for maintenance To collect historical data for maintenance objects To enable detailed cost analyses.
What are the prerequisites for creating a capacity requirement in a maintenance order operation? (Choose two) The performing work center must have available capacity data The performing work center must have a control key with the Determine Capacity Requirements indicator set The numeric value for Work in the order operation must be greater than 0 The operation must have a control key with the Determine Capacity Requirements indicator set.
In order costing configuration, for what is the allocation structure used? To provide a method of consolidating costs in the Plant Maintenance Information System To allocate costs to a hierarchy of maintenance technical objects To determine the cost elements that are allowed in the plant maintenance order To determine the settlement receiving elements for costs debited to the order.
Your customer uses operating hours to execute a performance-based maintenance plan. Which of the following data must you assign in the maintenance plan header? A task list for performance-based maintenance A cycle unit of measure with a corresponding characteristic from the measuring point An order type for performance-based maintenance A technical object with a measuring point.
Your customer wants to use the dynamic availability check for stock material ,What data must you use to create a scope for the check? Checking group and material type Checking rule and material type Checking rule and material group Checking group and checking rule.
What does the functional location category determine? (Choose two) Whether a fixed asset from Asset Accounting can be assigned Whether you can create linear data for a functional location The partner determination procedure The functional location class.
Your customer plans a plant shutdown and wants to use the Maintenance Event Builder to plan revisions and create maintenance orders automatically. What must you do in Customizing? Define field values for PM/PS Reference Element Define transfer of project or investment program Create a revision type and select WPS-Controlled Create a revision type and select Not WPS-Controlled.
When a user creates a notification or an order and enters a functional location as the reference object, you want the system to suggest the subordinate equipment automatically.
In addition to setting the reference object view in the order or the notification, what other settings must you make? (Choose two) Set View Profiles for Technical Objects in Customizing Set the Single Installation indicator in the equipment master data record Set the Single Installation indicator in the Functional Location master data record Set the Equipment-Installation Allowed indicator in the Functional Location master data record.
Your customer executes deadline monitoring (transaction IP30).
What happens after you insert additional call dates using the manual call function? The system restarts the maintenance plan The system retains the normal scheduled call dates The system fixes the next scheduled call date The system reschedules all previous scheduled call dates.
Your customer wants to settle costs of the refurbishment process to an inventory account. What Customizing does the process require? (Choose two) Special control keys for use in refurbishment operations A specific order type for refurbishment processing A specific settlement profile for the purpose of refurbishment A specific notification type for refurbishment processing.
Your customer wants the system to generate a serial number and an equipment master upo receipt of a material. Which Customizing steps are required? Create a serial number profile and assign it to an equipment master Create a serial number profile and assign it to a serializing procedure Create a serial number profile and assign it to a view profile for technical objects Create a serializing procedure and assign it to an equipment master.
Which steps must you perform to activate the usage history for equipment? (Choose two) Activate the usage history for the equipment category Set the Usage History indicator for the maintenance plant Define history-related fields for the relevant equipment reference category Activate the usage history for each piece of equipment in the master record.
Where do you define initial and subsequent buffers for the maintenance plan strategy? In the maintenance item In the maintenance plan category settings In the maintenance package for the maintenance strategy In the maintenance plan scheduling parameters.
Your customer wants to create a component for maintenance that does not allow physical inventory.
Which material type must you use? Spare parts (ERSA) Maintenance assembly (IBAU) Non-valuated materials (UNBW) Operating supplies (HIBE).
In a refurbishment order for external processing, where can you find information about the defective part after the goods issue has been posted? In special stock type R (refurbishment stock), after the return from the service company and a goods receipt posting In special stock type B (batch) after the return from the service company and a goods receipt posting In special stock type F (customer order stock) In special stock type O (parts provided to vendor).
Factory calendars are assigned to the maintenance plant and work center. By default, which factory calendar is used for work order scheduling? Planning plant Main work center Maintenance plant Production work center linked to a technical object.
Which scheduling parameter adjusts the cycle intervals of a maintenance strategy for each maintenance plan? The call horizon The early and late shift factors The early and late tolerance The cycle modification factor.
Which of the following information can the shift report display? (Choose three) Planned and actual costs for shifts Digital signatures for approval of a shift report Maintenance plans and task lists Maintenance orders and notifications Measurement documents and goods movements.
What does the scheduling period determine in the maintenance plan scheduling parameters? The duration for which the system generates maintenance orders immediately The duration for which the system generates planned or call dates during scheduling The duration for which the system generates maintenance notifications immediately The validity period of the maintenance plan.
What does the cycle set sequence in a multiple-counter maintenance plan determine? The scheduling sequence of a maintenance item The operation sequence of a maintenance order The scheduling sequence for a group of maintenance plans The operation sequence of a task list.
To which objects can you assign a user status profile? (Choose three) An order type A task list type A maintenance plan category An equipment category A notification type.
In which lifecycle scenarios can you use SAP Solution Manager? (Choose three) Retirement Operations Implementation Optimization Scoping.
What are the prerequisites for installing equipment at a functional location? (Choose two) A cost center is assigned to the equipment A fixed asset is assigned to the equipment The equipment category of the equipment allows the installation The functional location master record allows the installation.
Which of the following steps are required to create a measuring point for performance-based preventive maintenance? (Choose two) Specify the annual estimated usage for the measuring point Activate the Measurement Reading Transfer indicator Define a valuation code group Create the measuring point as a counter.
When a user creates a task list using the Copy function, all the header fields transfer to the new task list, with one exception.
Which field is the exception? Usage Work Center Assembly Status.
Your customer has several plants. How do you set up the maintenance organizational structure to implement centralized maintenance planning? Assign all your work centers to one of your central planning plants Define a plant and assign it to a company code Assign all your work centers to one of your maintenance plants Define a planning plant and assign the maintenance plants to this planning plant in Customizing.
Which standard aggregation of data does the Plant Maintenance Information System (PMIS) use? (Choose three) By info source By characteristics By data source By date period By key figures.
How can you maintain a distribution rule? (Choose two) Manually, prior to the first settlement Automatically, according to value categories in the order Manually, after the business completion for the order Automatically, based on a combination of Customizing and object master data.
You customize an order type to release orders immediately upon creation, and you assign the order type to a maintenance item.
How can a user override the automatic release of the order without creating a new order type? Select a maintenance planner group and set the Do Not Release Immediately indicator Set the Do Not Release Immediately indicator in the task list header Set the Do Not Release Immediately indicator in planning data for the maintenance item Select a maintenance activity type and set the Do Not Release Immediately indicator.
Your customer wants to assign personnel to order operations. Which master data must exist in the system? A requirements profile A personnel indicator in the control key A personnel profile A personnel number.
What are consequences of activating alternative labeling for functional locations? You can assign a serial number to a functional location You can change the primary functional location label and keep the old label as a historical functional location label The company code is automatically included in the functional location label You can change the primary functional location label and delete the old functional location label.
What does the maintenance plan category determine? The type of maintenance call object the system generates for a due maintenance call The type of technical object for the maintenance plan How maintenance call objects are generated for a due maintenance call The grouping of similar maintenance plans together for reporting.
What does the notification type define? (Choose three) The reference object view The catalog or catalog profile The scheduling type The planner group The number assignment of the notification.
What happens when you set the system status in a maintenance order to technically completed (TECO)? (Choose two) The system sets a deletion indicator for outstanding reservations The system sets a deletion indicator for outstanding purchase requisitions The system posts costs to the target account assignment The system sets a deletion indicator for purchase orders assigned to the maintenance order.
Which of the following can you assign to a maintenance order operation? (Choose three) Asset Equipment WBS element Maintenance order Measuring point.
Which of the following components is included in SAP Solution Manager? SAP NetWeaver Business Warehouse Master data management Service Desk SAP NetWeaver Enterprise Search.
Your customer wants to establish a maintenance work center with various activity types, each with a different fixed price.
How do you accomplish this? Create various maintenance activity types with the fixed prices and assign them to the work center Define the activity types for each maintenance planning plant Create various maintenance activity types in each work center and assign a price Define the activity types in Controlling and assign them to the cost center of the work center.
What does the structure indicator for a functional location determine? (Choose three) The functional location type The number of characters for each hierarchy level The edit mask The functional location category The number of hierarchy levels for a particular structure.
In Customizing, to what data must you assign digital signatures in addition to the order type? Maintenance plant Work center Maintenance planner group Planning plant.
Your customer wants to subdivide the maintenance organization by production responsibility.
What do you use to designate the contact person for coordination between production and plant maintenance? Plant section Production cost center Work center Controlling area.
To display overhead costs in a maintenance order, you need to assign a costing sheet in Customizing.
To which parameter do you assign the costing sheet? Version for cost estimates Costing type Valuation categories Valuation variant.
Which object do you use to assign number ranges for maintenance plans in Customizing? Maintenance planner group Technical object Maintenance item Maintenance plan category.
When you create a refurbishment order, which reference objects can you use? (Choose three) Functional location Equipment without serial number Material with serial number Material without serial number Equipment with serial number.
What are the prerequisites for the calculation of planned costs in an order? (Choose three) The order operations must have a control key with the Costing indicator set in Customizing The user must save the order or execute the Determine costs function The cost elements must be assigned to the order type in Customizing A costing variant for planned costs must be assigned to the order type in Customizing for order types The costing indicator must be set in Customizing for order types.
The view profile enables you to create a customized selection of tabs for use with technical objects.
Which Customizing step(s) must you perform to make a view profile available? Activate customized tabs for each equipment category or functional location category Create the view profile in the master record of either equipment or functional location Create the view profile and assign it to an object type Create the view profile for a particular screen group and then assign it to a functional location category or equipment category.
What purpose does the maintenance planner group serve? It determines which maintenance call object the system generates for a due maintenance call It identifies a person or a group of persons who is responsible for planning maintenance activities for a number of technical objects It identifies a person who is part of the main work center and who acts as the supervisor It represents a person or a group of persons who is responsible for maintaining task lists.
Your customer uses the dynamic availability check for stock material. Where does the system check material availability for an operation? In all plants where material inventory exists Only in the plant where the material has been reserved Only in the plant where the material is flagged with the special stock indicator for maintenance stock In all plants where the material is managed with serial numbers.
A customer wants to define an order type that includes a notification when the order is created. Which Customizing step(s) must you perform? Assign the notification type to the order type according to plant assignment in Customizing Set the indicator for notification data or order header and assign the notification type to the order type in Customizing Assign the notification type to the order type in Customizing Set the Notification indicator for the order type according to plant assignment in Customizing.
Which of the following steps must you perform to customize priorities for a maintenance order? Assign a priority type to an order type Assign priorities to technical object master records Assign a priority type to a technical object master record Assign priorities to order types.
Your customer needs a maintenance order type for use with Test Equipment Management in a maintenance plan. Which Customizing setting must you make for the order type? Assign an inspection lot to order type only Create an order type for Test Equipment Management Assign an inspection type to an order type with plant assignment Create a plant for inspection lots.
What are the prerequisites for order settlement? (Choose three) The order must be technically completed The order has not been settled previously A settlement rule must be created for the order The order must be released The settlement profile used in the order type must allow settlement.
Which of the following combinations must you use to create a single-cycle maintenance plan for an external service? A maintenance order for settlement and an outline agreement A framework order and a maintenance order for settlement A framework order and a subcontract purchase order A subcontract purchase order and an outline agreement.
Your customer wants to utilize estimated costs in Plant Maintenance orders. Which condition does the customer need to be aware of? Planned costs overwrite estimated costs after release of the order A specific order type in which cost estimates are activated must be used Planned costs must not exceed the estimated costs Upon release of the order, estimated costs cannot be revised.
What is the purpose of the usage list for equipment history? (Choose two) To display changes to history-related fields in an equipment master record To display the list of previous equipment operators To document the number of breakdowns for an object To track where the equipment was installed.
What step activates the Warranty subscreen as part of the equipment master data record? Setting the Master Warranty indicator in the equipment master data Setting the Use-in-Equipment indicator in the Master Warranty transaction Adding the Warranty subscreen in View Profiles for Technical Objects Adding the Warranty subscreen in the Object Information view of the equipment master data record.
Which of the following are maintenance work center functions? (Choose three) Capacity planning Production resources/tools (PRT) allocation Scheduling Costing Material planning.
What do you use to set up a refurbishment order for external refurbishment? An external operation that contains a subcontracting indicator and a material item with a material provision indicator activated An external operation that contains a control key for refurbishment An order type for external refurbishment and an assignment of a material with split valuation An order type for external refurbishment and a material item with item category Extern Refurbishment.
When is the latest possible point in time that you can create a settlement rule? Before technical completion Before order release After order release After technical completion.
What do you use to set up a refurbishment order for external refurbishment? An external operation that contains a subcontracting indicator and a material item with a material provision indicator activated An external operation that contains a control key for refurbishment An order type for external refurbishment and an assignment of a material with split valuation An order type for external refurbishment and a material item with item category External Refurbishment.
Your customer wants to generate costing for internal activities.
For which of the following can you define various rates in Activity Type/Price Planning transaction?
(Choose three) Plan/actual version Cost center Period Value category Plant.
Which steps must you perform to enable the valuation of characteristics for a piece of equipment? (Choose three) Assign characteristics to the equipment class type Assign characteristics to a class Create characteristics in the classification system Assign a class to a piece of equipment Assign a class to the equipment category.
A maintenance work order has external processing. The planning plant and maintenance plant have different addresses. A purchase requisition is generated from a maintenance order.
With standard delivered SAP Customizing, which address is the default delivery address in the purchase requisition? Work center Storage location Planning plant Maintenance plant.
What options are available in the maintenance order when you analyze costs using value categories? (Choose two) Display of costs by responsible work center Display of costs by individual operations Display of values in an alternate currency Summary of actual costs across multiple cost elements.
Users need to be able to select operations and work centers from the task list when they create a maintenance order with task list selection. In Customizing, how can you accomplish this requirement? (Choose two) By setting the indicators for the order type only By setting the indicators for the planning plant only By activating the work center selection indicator By activating the operation selection indicator.
How does SAP make new functions of the SAP ERP application available to customers? Via enhancement packages Via best practices Via add-ons Via Support Packages.
For which business requirements must you use serial numbers? (Choose two) To uniquely identify inventory material items To have a future option to track material items as pieces of functional locations To have a future option to track material items as pieces of equipment To have the option to track batches.
You want to record changes to equipment master data fields in the usage history. For which of the following objects can you activate the usage history? Please choose the correct answer Equipment class Equipment category Object type Planning plant.
TO create a BOM for a functional location/ equipment BOM. You can use Please choose the correct answer. Material BOMs Planning Accounting Objects.
What all are the steps sequenced for structuring of technical process?
There are 2 correct answers to this question. Identify Structure Define Assign Execute.
Which location object information is available?
Please choose the correct answer. Catalog Field In the notification Editor phase.
What does the structure indicator for a functional location determine? There are 3 correct answers to this question The functional location type The number of characters for each hierarchy level The edit mask The functional location category The number of hierarchy levels for a particular structure.
The items involved in master warranty structure. Identify them There are 3 correct answers to this question. Warranty header Warranty items Warranty counter Warranty cards Warranty cells.
You are using a maintenance plan for test equipment calibrations. When is an inspection lot created?
Please choose the correct answer After entering measuring point data that is out of tolerance When a follow-up action is triggered from a malfunction report Before the calibration order is created When the calibration order is created.
Under which conditions you can change stock information in the serial number manually.
There are 2 correct answers to this question. All active No stock check is active No plant has been entered BOM active Sterilization operation.
What do maintenance planner groups represent? Please choose the correct answer. A group of persons who plan maintenance capacities A group of persons responsible for maintenance plans A group of persons who plan maintenance task lists A group of persons who plan maintenance activities for technical assets.
Identifies the various ways to navigate around SAP system.
There are 2 correct answers to this question Using the menu entries Using the favorites list Text Insert Clipboard.
Identify the business purpose for which work center data is us
There are 2 correct answers to this question. Personnel data Costing Public order Notifications External information.
Plant maintenance strategies involve the following steps. Identify them
There are 3 correct answers to this question RBI RCM TPM CAA BAT.
What all are the steps take part in external work center.
There are 2 correct answers to this question Technical completion Notify Process Order Structure.
Your customer wants to view a list of all planned materials in multiple maintenance orders with order status CRTD.
Which of the following standard reports can you use to find the information required?
(There are 3 correct answers) The order and operation list The material availability report The operation list The materials where-used report The order list.
What are the general settings of maintenance notification?
There are 3 correct answers to this question Field selection List editor Condition indicator Managerial values Catalog.
What all are the 2 inputs of structure indicators
There are 2 correct answers to this question The edit screen The hierarchy levels Middle levels Bottom levels Upper levels.
Your customer wants to assign maintenance orders to network activities automatically with the Maintenance Event Builder (MEB).
Which of the following steps must you perform?
There are 2 correct answers to this question Set the define Transfer of Project or Invest Program indicator Assign maintenance orders manually to a revision with revision type WPS-controlled Assign a network to a revision with revision type WPS-controlled Assign a hierarchical task list to a notification Assign the Reference PM/PS element to task list headers and network activities.
Life cycle of External Procurement involves the following. Identify
There are 2 correct answers to this question. Define shutdown Cross-department execution Procuring external services Procuring external material Ensures employee’s security.
Data on measuring point contain the following.
Please choose the correct answer Stock Material Measurement position Operations.
To display overhead costs in a maintenance order, you need to assign a costing sheet in Customizing.
To which parameter do you assign the costing sheet?
Please choose the correct answer. Version for cost estimates Costing type Valuation categories Valuation variant.
What is a method for loading data from source system datasets to a Data Source extraction structure?
Please choose the correct answer. Extractor Transfer structure Info provider Info source.
How do you define operations for preventive maintenance tasks?
Please choose the correct answer. By assigning the operations directly to the maintenance plan By assigning the operations directly to the maintenance item By assigning the task list to the maintenance plan By assigning the task list to the maintenance item.
A maintenance technician replaces a defective counter with a new counter. Before the users can create a standard measuring document for the new counter, what step(s) must they perform?
Please choose the correct answer. Create a new technical object to represent the new measuring point. Create a special measuring document and set the Counter Replacement indicator. Dismantle the old measuring point and create a new measuring point. Create a new measuring point and change the measuring point from which the measurement reading was transferred.
A measurement document is the overall term used to describe in system.
Please choose the correct answer. Data entered Task list Material stored Control panel.
Your customer executes deadline monitoring (transaction IP30).
What happens after you insert additional call dates using the manual call function?
Please choose the correct answer. The system restarts the maintenance plan The system retains the normal scheduled call dates The system fixes the next scheduled call date The system reschedules all previous scheduled call dates.
Your customer wants to settle costs of the refurbishment process to an inventory account.
What Customizing does the process require?
There are 2 correct answers to this question Special control keys for use in refurbishment operations A specific order type for refurbishment processing A specific settlement profile for the purpose of refurbishment A specific notification type for refurbishment processing.
You have selected Confirmation Required in the control key for operations in a maintenance order. One of the operations is already partially confirmed. Which system statuses can the order header display before all operations are finally confirmed?
There are 3 correct answers to this question. TECO PCNF CRTD CNF CLSD.
Your customer wants to utilize estimated costs in Plant Maintenance orders. Which condition does the customer need to be aware of? Please choose the correct answer. Planned costs overwrite estimated costs after release of the order A specific order type in which cost estimates are activated must be used Planned costs must not exceed the estimated costs Upon release of the order, estimated costs cannot be revised.
What are the 2 options available for archiving order?
There are 2 correct answers to this question. Manually enter historical orders Recognize orders Order settlement Refurbishment Copy orders.
Identify the conditions required for Project work
There are 3 correct answers to this question Time Resource Cost Completion Ability to solve issues.
In order costing, what is the allocation structure used for?
Please choose the correct answer To provide a hierarchy structure for posting costs to the general ledger To provide a structure to summarize postings across cost elements To determine the cost element for debit to the order and credit from the order To determine the overhead costs that need to be applied to each cost element.
Find out the elements responsible for performance management.
There are 3 correct answers to this question. Investment planning Project definition Execution Dispatch Ordering.
What do you need to select when you create a maintenance plan that only generates notification(s)?
Please choose the correct answer. A maintenance plan category for notifications A specific notification type for maintenance plans A specific notification type that includes a task list A specific maintenance strategy for notifications.
You customize an order type to release orders immediately upon creation, and you assign the ord type to a maintenance item.
How can a user override the automatic release of the order without creating a new order type? Please choose the correct answer. Select a maintenance planner group and set the Do Not Release Immediately indicator Set the Do Not Release Immediately indicator in the task list header Set the Do Not Release Immediately indicator in planning data for the maintenance item Select a maintenance activity type and set the Do Not Release Immediately indicator.
For which business requirements must you use serial numbers?
There are 2 correct answers to this question To uniquely identify inventory material items To have a future option to track material items as pieces of functional locations To have a future option to track material items as pieces of equipment To have the option to track batches.
In which lifecycle scenarios can you use SAP Solution Manager?
There are 3 correct answers to this question Retirement Operations Implementation Optimization Scoping.
Which of the following control characters is available in the edit mask of the structure indicator?
Please choose the correct answer. D (numeric characters) M (alphanumeric characters) Y (special characters) A (alpha characters).
For what maintenance manager is responsible.
Please choose the correct answer Defining, controlling and triggering the budget planning process Execute the planning process Multiple tasks None of the above.
What are the prerequisites for installing equipment at a functional location?
There are 2 correct answers to this question. A cost center is assigned to the equipment A fixed asset is assigned to the equipment The equipment category of the equipment allows the installation The functional location master record allows the installation.
Factory calendars are assigned to the maintenance plant and work center. By default, which factory calendar is used for work order scheduling? Please choose the correct answer. Planning plant Main work center Maintenance plant Production work center linked to a technical object.
Your customer has several plants.How do you set up the maintenance organizational structure to implement centralized Maintenance planning?
Please choose the correct answer Assign all your work centers to one of your central planning plants Define a plant and assign it to a company code Assign all your work centers to one of your maintenance plants Define a planning plant and assign the maintenance plants to this planning plant in Customizing.
What are the 2 reasons of the maintenance Bill of Material
There are 2 correct answers to this question. Structuring of the object Planning in task list Distribution Object identification Clearance.
For which purpose do you use the sequence number in a cycle set?
Please choose the correct answer. To sequence the operations in the task list assigned to a maintenan To determine which strategy applies to each cycle To assign a cycle set to the task list of a maintenance item To assign the cycle set to a maintenance item.
Which statements apply to a client in an SAP system?
Choose the correct answer(s). In business terms, the client is a completely independent unit Each client has their own database A client corresponds to a customer A client can represent the mapping for an entire enterprise.
Which of the following rules applies to user status in orders and notifications?
Please choose the correct answer. The user status in the notification can be copied into the order When you set a new user status with a status number, the previous user status with status number is deactivated When a user status is flagged as an initial status, it overrides the initial system status CRTD Changes to the user status can affect authorizations.
What does the maintenance plan category determine?
Please choose the correct answer The type of maintenance call object the system generates for a due maintenance call The type of technical object for the maintenance plan How maintenance call objects are generated for a due maintenance call The grouping of similar maintenance plans together for reporting.
Identify the resource that enables you to represent the wear and tear of an object.
Please choose the correct answer. Points Items Counters Control.
All maintenance plans in your systems are scheduled automatically via deadline monitoring. What happens when you set a manual call? Please choose the correct answer. The original scheduled dates of the maintenance plan remain All scheduled calls on hold are skipped All scheduled calls on hold are deleted The waiting call dates are re-scheduled on the basis of the manual call.
Which rule applies to user status in orders and notifications? Please choose the correct answer. When you set a new user status with a status number, the previous user status with status number is deactivated When a user status is flagged as an initial status, it overrides the initial system status CRTD Every user, regardless of assigned authorizations, can assign a user status The user status in the notification can be copied into the order.
Which object do you use to assign number ranges for maintenance plans in Customizing? Please choose the correct answer Maintenance planner group Technical object Maintenance item Maintenance plan category.
What happens when you set the system status in a maintenance order to technically completed (TECO)?
There are 2 correct answers to this question The system sets a deletion indicator for outstanding reservations The system sets a deletion indicator for outstanding purchase requisitions The system posts costs to the target account assignment The system sets a deletion indicator for purchase orders assigned to the maintenance order.
Your customer wants to create a component for maintenance that does not allow physical inventory.
Which material type must you use? Spare parts (ERSA) Maintenance assembly (IBAU) Non-valuated materials (UNBW) Operating supplies (HIBE).
Which of the following combinations must you use to create a single-cycle maintenance plan for an external service?
Please choose the correct answer. A maintenance order for settlement and an outline agreement A framework order and a maintenance order for settlement A framework order and a subcontract purchase order A subcontract purchase order and an outline agreement.
Which of the following are maintenance work center functions? There are 3 correct answers to this question Capacity planning Production resources/tools (PRT) allocation Scheduling Costing Material planning.
The following entries are possible in the command field: Choose the 5 correct answer(s). /nend /nex ?SM04 /nsm04 From SAP Easy Access: SM04 From SAP Easy Access: search_sap_menu.
Which of the following information can the shift report display?
There are 3 correct answers to this question. Planned and actual costs for shifts Digital signatures for approval of a shift report Maintenance plans and task lists Maintenance orders and notifications Measurement documents and goods movements.
Identify the objects that are linked to the address management
Please choose the correct answer. Out bound In bound Functional location Procedure.
In a refurbishment order for external processing, where can you find information about the defective part after the goods issue has been posted? Please choose the correct answer. In special stock type R (refurbishment stock), after the return from the service company and a goods receipt posting In special stock type B (batch) after the return from the service company and a goods receipt posting In special stock type F (customer order stock) In special stock type O (parts provided to vendor).
What do you mean by the term PMIS.
Please choose the correct answer. Project maintenance information system Plant maintenance information system Project management system Process management system.
A user has planned an operation with labor costs and material costs; however, the material cost element is not assigned to a value category. Where do the material costs appear in the value categories for the order? Please choose the correct answer. In the overhead value category In a new, automatically created value category In the unassigned value category In the internal activity value category.
Which of the following steps are required to create a measuring point for performance-based preventive maintenance?
There are 2 correct answers to this question. Specify the annual estimated usage for the measuring point Activate the Measurement Reading Transfer indicator Define a valuation code group Create the measuring point as a counter.
Which account assignment category can you specify in a settlement profile?
Please choose the correct answer. Maintenance planning plant Functional location Equipment Material.
What are the 3 types of Order? There are 3 correct answers to this question. Maintenance order Preventive maintenance order Refurbishment Lists Category.
What all are the elements display on SAP screen. Identify
There are 2 correct answers to this question Menu Bar Standard Tool Bar Clipboard Text Review.
Which of the following components is included in SAP Solution Manager?
Please choose the correct answer. SAP NetWeaver Business Warehouse Master data management Service Desk SAP NetWeaver Enterprise Search.
Which of the following steps must you perform to customize priorities for a maintenance order?
Please choose the correct answer. Assign a priority type to an order type Assign priorities to technical object master records Assign a priority type to a technical object master record Assign priorities to order types.
What does the functional location category determine?
There are 2 correct answers to this question. Whether a fixed asset from Asset Accounting can be assigned Whether you can create linear data for a functional location The partner determination procedure The functional location class.
What does the cycle set sequence in a multiple-counter maintenance plan determine?
Please choose the correct answer. The scheduling sequence of a maintenance item The operation sequence of a maintenance order The scheduling sequence for a group of maintenance plans The operation sequence of a task list.
When a user creates a task list using the Copy function, all the header fields transfer to the new task list, with one exception. Which field is the exception? Please choose the correct answer. Usage Work Center Assembly Status.
What does the scheduling period determine in the maintenance plan scheduling parameters?
Please choose the correct answer. The duration for which the system generates maintenance orders immediately The duration for which the system generates planned or call dates during scheduling The duration for which the system generates maintenance notifications immediately The validity period of the maintenance plan.
What is the purpose of the usage list for equipment history? There are 2 correct answers to this question To display changes to history-related fields in an equipment master record To display the list of previous equipment operators To document the number of breakdowns for an object To track where the equipment was installed.
Your customer wants to generate costing for internal activities.
For which of the following can you define various rates in Activity Type/Price Planning transaction?
There are 3 correct answers to this question Plan/actual version Cost center Period Value category Plant.
|
