Cuestiones
ayuda
option
Mi Daypo

TEST BORRADO, QUIZÁS LE INTERESEApuntes

COMENTARIOS ESTADÍSTICAS RÉCORDS
REALIZAR TEST
Título del test:
Apuntes

Descripción:
Examen 1

Autor:
.
(Otros tests del mismo autor)

Fecha de Creación:
14/07/2022

Categoría:
Otros

Número preguntas: 38
Comparte el test:
Facebook
Twitter
Whatsapp
Comparte el test:
Facebook
Twitter
Whatsapp
Últimos Comentarios
No hay ningún comentario sobre este test.
Temario:
Which certificate value can FortiGate use to determine the relationship between the issuer and the certificate? Subject Key Identifier value SMMIE Capabilities value Subject value Subject Alternative Name value.
Which two statements are true when FortiGate is in transparent mode? (Choose two.) By default, all interfaces are part of the same broadcast domain. The existing network IP schema must be changed when installing a transparent mode FortiGate in the network. Static routes are required to allow traffic to the next hop. FortiGate forwards frames without changing the MAC address.
What inspection mode does FortiGate use if it is configured as a policy-based next-generation firewall (NGFW)? Full Content inspection Proxy-based inspection Certificate inspection Flow-based inspection.
Which two statements about IPsec authentication on FortiGate are correct? (Choose two.) For a stronger authentication, you can also enable extended authentication (XAuth) to request the remote peer to provide a username and password. FortiGate supports pre-shared key and signature as authentication methods Enabling XAuth results in a faster authentication because fewer packets are exchanged. A certificate is not required on the remote peer when you set the signature as the authentication method.
Which scanning technique on FortiGate can be enabled only on the CLI? Heuristics scan Trojan scan Antivirus scan Ransomware scan.
Which two policies must be configured to allow traffic on a policy-based next-generation firewall (NGFW) FortiGate? (Choose two.) Firewall policy Policy rule Security policy SSL inspection and authentication policy.
You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk. What is the default behavior when the local disk is full? Logs are overwritten and the only warning is issued when log disk usage reaches the threshold of 95% No new log is recorded until you manually clear logs from the local disk Logs are overwritten and the first warning is issued when log disk usage reaches the threshold of 75% No new log is recorded after the warning is issued when log disk usage reaches the threshold of 95%.
Refer to the exhibit, which contains a Performance SLA configuration. An administrator has configured a performance SLA on FortiGate, which failed to generate any traffic. Why is FortiGate not generating any traffic for the performance SLA? There may not be a static route to route the performance SLA traffic. You need to turn on the Enable probe packets switch. The Ping protocol is not supported for the public servers that are configured. Participants configured are not SD-WAN members.
FortiGate is operating in NAT mode and is configured with two virtual LAN (VLAN) subinterfaces added to the same physical interface. In this scenario, which statement about VLAN IDs is true? The two VLAN subinterfaces can have the same VLAN ID only if they belong to different VDOMs. The two VLAN subinterfaces must have different VLAN IDs. The two VLAN subinterfaces can have the same VLAN ID only if they have IP addresses in the same subnet. The two VLAN subinterfaces can have the same VLAN ID only if they have IP addresses in different subnets.
A FortiGate is operating in NAT mode and configured with two virutal LAN (VLAN) subinterfaces added to the physical interface. Which statements about the VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in different subnets. The two VLAN subinterfaces can have the same VLAN ID, only if thet have IP address in different subnets, The two VLAN subinterfaces must have different VLAN IDs. The two VLAN subinterfaces can have the same VLAN ID, only if they belong to different VDOMs. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in the same subnet.
Question #9Topic 1 Refer to the exhibit to view the application control profile. Users who use Apple FaceTime video conferences are unable to set up meetings. In this scenario, which statement is true? Apple FaceTime belongs to the custom monitored filter. The category of Apple FaceTime is being monitored. Apple FaceTime belongs to the custom blocked filter The category of Apple FaceTime is being blocked.
What is the effect of enabling auto-negotiate on the phase 2 configuration of an IPsec tunnel? FortiGate automatically negotiates different local and remote addresses with the remote peer. FortiGate automatically negotiates a new security association after the existing security association expires. FortiGate automatically negotiates different encryption and authentication algorithms with the remote peer. FortiGate automatically brings up the IPsec tunnel and keeps it up, regardless of activity on the IPsec tunnel.
Which three security features require the intrusion prevention system (IPS) engine to function? (Choose three.) Web filter in flow-based inspection Antivirus in flow-based inspection DNS filter Web application firewall Application control.
Refer to the exhibit. Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.) There are five devices that are part of the security fabric. Device detection is disabled on all FortiGate devices. This security fabric topology is a logical topology view. There are 19 security recommendations for the security fabric.
The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile. What order must FortiGate use when the web filter profile has features enabled, such as safe search? DNS-based web filter and proxy-based web filter Static URL filter, FortiGuard category filter, and advanced filters Static domain filter, SSL inspection filter, and external connectors filters FortiGuard category filter and rating filter.
When a firewall policy is created, which attribute is added to the policy to support recording logs to a FortiAnalyzer or a FortiManager and improves functionality when a FortiGate is integrated with these devices? Log ID Universally Unique Identifier Policy ID Sequence ID.
Refer to the exhibit to view the firewall policy. Which statement is correct if well-known viruses are not being blocked? The firewall policy does not apply deep content inspection The firewall policy must be configured in proxy-based inspection mode. The action on the firewall policy must be set to deny. Web filter should be enabled on the firewall policy to complement the antivirus profile.
Refer to the exhibit, which contains a session diagnostic output. Which statement is true about the session diagnostic output? The session is a UDP unidirectional state The session is in TCP ESTABLISHED state. The session is a bidirectional UDP connection. The session is a bidirectional TCP connection.
Refer to the exhibit. The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address. An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies. The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form-based authentication scheme for the FortiGate local user database. Users will be prompted for authentication. How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP 10.0.1.10 to the destination http:// www.fortinet.com? (Choose two.) If a Mozilla Firefox browser is used with User-B credentials, the HTTP request will be allowed. If a Google Chrome browser is used with User-B credentials, the HTTP request will be allowed. If a Mozilla Firefox browser is used with User-A credentials, the HTTP request will be allowed. If a Microsoft Internet Explorer browser is used with User-B credentials, the HTTP request will be allowed. If a Mozilla Firefox browser is used with User-C credentials, the HTTP request will be denied.
Refer to the exhibit. Exhibit A - Exhibit B - The exhibit shows the configuration for the SD-WAN member, Performance SLA and SD-WAN Rule, as well as the output of diagnose sys virtual-wan- link health-check. Which interface will be selected as an outgoing interface? port4 port2 port1 port3.
What devices form the core of the security fabric? Two FortiGate devices and one FortiManager device One FortiGate device and one FortiManager device Two FortiGate devices and one FortiAnalyzer device One FortiGate device and one FortiAnalyzer device.
Which three criteria can a FortiGate use to look for a matching firewall policy to process traffic? (Choose three.) Source defined as Internet Services in the firewall policy. Destination defined as Internet Services in the firewall policy. Highest to lowest priority defined in the firewall policy. Services defined in the firewall policy. Lowest to highest policy ID number.
Which two configuration settings are synchronized when FortiGate devices are in an active-active HA cluster? (Choose two.) FortiGuard web filter cache FortiGate hostname NTP DNS.
Which security feature does FortiGate provide to protect servers located in the internal networks from attacks such as SQL injections? Denial of Service Web application firewall Antivirus Application control.
Refer to the exhibit. Review the Intrusion Prevention System (IPS) profile signature settings. Which statement is correct in adding the FTP.Login.Failed signature to the IPS sensor profile? Traffic matching the signature will be silently dropped and logged. The signature setting uses a custom rating threshold. The signature setting includes a group of other signatures. Traffic matching the signature will be allowed and logged.
How does FortiGate act when using SSL VPN in web mode? FortiGate acts as an FDS server. FortiGate acts as an HTTP reverse proxy. FortiGate acts as DNS server. FortiGate acts as router.
Refer to the exhibit. The exhibit contains a network diagram, firewall policies, and a firewall address object configuration. An administrator created a Deny policy with default settings to deny Webserver access for Remote-user2. Remote-user2 is still able to access Webserver. Which two changes can the administrator make to deny Webserver access for Remote-User2? (Choose two.) Disable match-vip in the Deny policy. Set the Destination address as Deny_IP in the Allow-access policy. Enable match-vip in the Deny policy. Set the Destination address as Web_server in the Deny policy.
Which three pieces of information does FortiGate use to identify the hostname of the SSL server when SSL certificate inspection is enabled? (Choose three.) The subject field in the server certificate The serial number in the server certificate The server name indication (SNI) extension in the client hello message The subject alternative name (SAN) field in the server certificate Most Voted The host field in the HTTP header.
Which two protocols are used to enable administrator access of a FortiGate device? (Choose two.) SSH HTTP FTM FortiTelemetry.
Refer to the FortiGuard connection debug output. Based on the output shown in the exhibit, which two statements are correct? (Choose two.) A. A local FortiManager is one of the servers FortiGate communicates with. One server was contacted to retrieve the contract information. There is at least one server that lost packets consecutively. FortiGate is using default FortiGuard communication settings.
FortiGate is configured as a policy-based next-generation firewall (NGFW) and is applying web filtering and application control directly on the security policy. Which two other security profiles can you apply to the security policy? (Choose two.) Antivirus scanning File filter DNS filter intrusion prevention.
Which two types of traffic are managed only by the management VDOM? (Choose two.) FortiGuard web filter queries PKI Traffic shaping DNS Most Voted.
An administrator must disable RPF check to investigate an issue. Which method is best suited to disable RPF without affecting features like antivirus and intrusion prevention system? Enable asymmetric routing, so the RPF check will be bypassed. Disable the RPF check at the FortiGate interface level for the source check. Disable the RPF check at the FortiGate interface level for the reply check. Enable asymmetric routing at the interface level.
A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes. ✑ All traffic must be routed through the primary tunnel when both tunnels are up. ✑ The secondary tunnel must be used only if the primary tunnel goes down. ✑ In addition, FortiGate should be able to detect a dead tunnel to speed up tunnel failover. Which two key configuration changes are needed on FortiGate to meet the design requirements? (Choose two.) Configure a higher distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel. Enable Dead Peer Detection. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static route for the secondary tunnel. Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels.
Refer to the exhibit. Given the interfaces shown in the exhibit, which two statements are true? (Choose two.) Traffic between port2 and port2-vlan1 is allowed by default. Port1-vlan10 and port2-vlan10 are part of the same broadcast domain. Port1 is a native VLAN. Port1-vlan1 and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.
Which two statements are correct about SLA targets? (Choose two) You can configure only two SLA targets per one Performance SLA SLA targets are optional. SLA targets are required for SD-WAN rules with a Best Quality strategy. SLA targets are used only when referenced by an SD-WAN rule.
Refer to the web filter raw logs. Based on the raw logs shown in the exhibit, which statement is correct? Access to the social networking web filter category was explicitly blocked to all users. The action on firewall policy ID 1 is set to warning. Social networking web filter category is configured with the action set to authenticate. Most Voted The name of the firewall policy is all_users_web.
Which two statements are true about collector agent standard access mode? (Choose two.) Standard mode uses Windows convention-NetBios: Domain\Username. Standard mode security profiles apply to organizational units (OU). Standard mode security profiles apply to user groups. Most Voted Standard access mode supports nested groups.
Denunciar test Consentimiento Condiciones de uso