test 01

In what customizing table do you group employees for use in personnel calculation rules (PCRs)?. V_T511. V_001P_K. V_512W O. V_503_B.

Which activities must you configure before running a payroll? Note: There are 2 correct Answers to this question. Generate payroll periods. Create control records. Create organizational units. Assign cost centers to positions.

What operation must you use to query an employee's personnel area in a personnel calculation rule (PCR)?. OUTWPPLANT. OUTWPPAYSB. OUTWPABART. OUTWPPARTT.

Which processing class determines if a wage type should be considered for factoring?. Processing class 10. Processing class 6. Processing class 3. Processing class 20.

Which wage type do you use for cumulations?. /552. /101. /001. /801.

How can you view the status of the payroll run?. By using the payroll infotype. By using the payroll area. By using the payroll period. By using the payroll control record.

Which functions use MODIF A to evaluate absences?. WPBP. RAB. PAB. P2001.

An employee reports an absence that spans several payroll periods. Where can SAP Payroll evaluate the absence using absence valuation? Note: There are 3 correct Answers to this question. On the working day in which the absence ends. In the payroll period in which the absence begins. On the actual dates in each affected payroll period. In the working week in which the absence begins. In the payroll period in which the absence ends.

What must you define in the attributes of a personnel calculation rule (PCR)? Note: There are 2 correct Answers to this question. Processing class. Program class. Project assignment. Country grouping.

A vacation wage type is to be generated for an employee based on vacation.Which identifiers play an important role in Absence Valuation (v_T554C) in Customizing?. MODIF A and Absence Valuation Rule. MODIF 2 and Absence Valuation Rule. MODIF W and Absence Valuation Rule. MODIF W and the Day Rule.

The following wage type with its wage type fields is given: Wage Type 5000 Rate:10 Number:0 Amount:13 What is the result of the wage type in the output IT if it only runs through the following calculation rules: MULTI RAA and ADDWT *?. Rate = 0 Number = 0 Amount = 130. Rate = 0 Number = 0 Amount = 0. Rate = 10 Number = 0 Amount = 130. Rate 10 Number = 0 Amount = 0.

Which scenarios cause factoring to occur when they happen in the middle of a pay period? Note:There are 2 correct Answers to this question. A new main bank record is created. An employee has a basic pay change. An employee's name is updated. A different work schedule rule is assigned.

What function generates time wage types on the TIP table?. GWT. DAYPR. PIT. PZL.

In which payroll subschema are time wage types selected?. TM00 Time Evaluation with Clock Times. TM04 Time Evaluation Without Clock Times. TC00 Time Data Processing, WT Selection. XINO Initialization of payroll (INTERNATIONAL).

Which of the following personnel calculation rules does the system use in the subschema of XAL9 factoring and storage? Note: There are 2 correct Answers to this question. X020. X015. XPPF. XVAL.

Which of the following rules are used to determine hourly rates for all employees? Note: There are 2 correct Answers to this question. X010. X012. X015. X013.

Under what condition will a time wage type be selected using the rule shown in the attached graphic?. On a Sunday. For all planned work. NOT on a public holiday. After a maximun of two work hours.

When processing a wage type, there is no requirement to differentiate between employee subgroup groupings. What value must you add in parameter 3 when function PIT calls the rule to process the wage type?. GEN. Pnnn. NOAB. <Blank>.

What is the name of the international subschema that is used to initialize payroll?. XTOO. XBDO. XINO. XEND.

You want to multiply wage type fields rate and number in a calculation rule. The result should be in the amount field. The values in the rate and number fields should then be set to zero. Which arithmetic operations do you have to use?. MULTI RNA ELIMI=N ELIMI=N. MULTI ARN ZERO=N ZERO=A. MULTI RNA ZERO=N ZERO=R. MULTI ANR ZERO=N ZERO=A.

You are working in an international accounting protocol of SAP with functions and tables. Which of the following is both a function and a table?. GENPS. COPY. WPBP. PIT.

In what order are the subschemas processed in the payroll main schema X000?. 1. XEND Final processing 2. XBDO Edit basic data 3. XTOO Gross remuneration (Time Management) 4. XAL9 Factoring and storage. 1. XBDO Edit basic data 2. XTOO Gross remuneration (Time Management) 3. XAL9 Factoring and storage 4. XEND Final processing. 1. XTOO Gross remuneration (Time Management) 2. XBDO Edit basic data 3. XAL9 Factoring and storage 4. XEND Final processing. 1. XBDO Edit basic data 2. XAL9 Factoring and storage 3. XTOO Gross remuneration (Time Management) 4. XEND Final processing.

Which functions do you use to import infotypes data into the current payroll run? Note: There are 2 correct Answers to this question. COM. WPBP. 2010. PIT.

Which personnel calculation rule is used to determine the "Time wage type selection group" (MODIF W)?. XMOD. X015. X013. TMOD.

Which wage type’s can you use to calculate the hourly base rate for salaried employees? Note: There are 2 correct Answers to this question. /802. /001. /802. /002.

In rule XPPF, what does operation PPPAR check? Note: There are 2 correct Answers to this question. Employee entry or exit after period start. Payments replaced. Work place basic pay splits. Current entry in arrears.

What function do you use to select the time wage types for table DZL?. P2002. DAYMO. GWT. TIMTP.

Which of the following values are allowed in parameter 2 for function PIT? Note: There are 2 correct Answers to this question. PRT. NOAB. P10. GEN.

You want to use rule Z123 to process only wage type 1200 in the results table (RT). The processing will differ for hourly and salary employees. How do you call the rule?. PRT Z123 <blank> NOAB. PRT Z123 <blank> <blank>. PRT Z123 GEN NOAB. PRT Z123 1200 <blank>.

What is the purpose of the GENAU constant in the standard payroll process?. It decreases the time for processing payroll. It increases the accuracy of rounding. It provides employee groupings for payroll. It removes redundancy from calculations.

What should be the status of the payroll control record if you want to create live posting documents?. Released for payroll. Check payroll results. Released for correction. Exit payroll.

All wage types in the input table (IT) must be processed using personnel calculation rule Z123. In addition, you need to consider the employee subgroup grouping for the personnel calculation rule. What configuration should you set up to accomplish this?. PIT Z123 <blank> <blank>. PIT Z123 GEN <blank>. PIT Z123 GEN NOAB. PIT Z123 <blank> NOAB.

What do you need to configure to valuate a time wage type using a wage-type-dependent constant?. Personnel calculation rule TMOD with MODIF W groupings. Personnel calculation rule XMOD with MODIF A groupings. Personnel calculation rule XMOD with MODIF 2 groupings. Personnel calculation rule TMOD with MODIF T groupings.

You want to use the possibilities of counting classes. Into which types can each counting class be classified? Note: There are 2 correct Answers to this question. SA. AP. KA. AU.

Which of the following are processed before function MOD in subschema XT00? Note: There are 2 correct Answers to this question. Function GENPS. Rule X015. Rule X010. Function AVERA.

What can be included in an average calculation rule? Note: There are 3 correct Answers to this question. Cumulation rules. Function PARTT. Relevant average period. Final processing. Modifier groupings.

How can an HR administrator process payroll for an employee after the employee has left the organization?. Maintain Run Payroll up to Date on the Payroll Status infotype (IT0003). Maintain a qualified advance payment. Maintain the Earliest MD Change date on the Payroll Status infotype (IT0003). Maintain an advance payment from master data.

How can you evaluate a wage type if it is configured to use constant valuation bases? Note: There are 3 correct Answers to this question. Configure a varying amount based on employee group and employee subgroup. Configure a varying amount based on the hourly rate. Configure a varying amount based on pay scale group and pay scale level. Configure a varying amount based on an average rate. Assign a fixed amount.

What operation do you use to query the average working hours per pay period for each partial period in table PARTT?. GSDIVP. TSDIVP. TADIVP. GADIVP.

Which of the following infotypes are imported by function WPBP? Note: There are 3 correct Answers to this question. 0008. 0007. 0015. 0001. 2001.

Which function in sub schema XBDO (basic data) checks if all master data has been completely imported?. UPD. GON. ENAME. WPBP.

You want a basic wage type to be included in valuation basis /001 in order to determine an amount per hour. What processing class do you use to achieve that?. 1. 10. 15. 99.

What does operation ELIMI do in a personnel calculation rule (PCR)?. It prepares wage types for accumulation. It adds up wage types. It sets the time period indicators. It divides two fields in the current entry and places the result in a third field.

With which operation can you transfer wage types to an internal table?. XINO. PIT. ADDWT. OUTWP.

What does function GEN/8 do?. It generates secondary wage types and writes them to the input table (IT) for each partial period. It divides a wage type by 100000 and writes the result to the rate (RTE) field for each partial period. It generates a maximum of 8 secondary wage types and writes them to the input table (IT) for each partial period. It multiplies a wage type by 100000 and writes the result to the rate (RTE) field for each partial period.

To include absence hours in the PARTA table, what must be defined in absence valuation rules?. Counting class. Day rule. As-if principle. Wage type.

You want to use a wage type in infotype 8 (Basic Pay) that valuates your amounts indirectly from the pay scale table. Which module do you use for this?. SUMME. PRZNT. ARBPL. TARIF.

In which internal table can you find the cumulated time wage types?. AB. ZL. ZML. DZL.

Which elements can you use to build wage type selection rules? Note: There are 2 correct Answers to this question. XMOD grouping. Processing type. Work schedule rule. Conditions for the day.

Which of the following infotypes are evaluated for payroll factoring? Note: There are 3 correct Answers to this question. Absences infotype (IT2001). Organizational Assignment infotype (IT0001). Bank Details infotype (IT0009). Payroll Status infotype (IT0003). Actions infotype (IT0000).

How many parameters can function DAYMO use?. 1. 2. 3. 3.

Which options can you use with function PIT to control wage type access in a personnel calculation rule (PCR)? Note: There are 2 correct Answers to this question. Pnn. GEN. NOAB. ABART.

In which order can you carry out the payroll process?. 1. Release payroll. 2. Start payroll 3. Exit payroll. 1. Start payroll 2. Release payroll. 3. Exit payroll. 1. Start payroll. 2. Check result. 3. Exit payroll. 1. Release payroll. 2. Exit payroll. 3. Start payroll.

Which options do you have to assign a constant valuation basis to the time wage type? Note: There are 2 correct Answers to this question. K. 01. TG. 02.

You want to calculate partial period factors including unpaid absences in work days for all counting classes. What variable do you use?. SAP02. KAU**. AAU**. SAP**.

Which secondary wage types are available for average calculation?. /840 to 1845. /201 to /232. /001 to /002. /801 to /816.

You are using operation ADDWTE*. Into which table will the wage type be transferred?. Time Input table (TIP). Results table (RT). Output table (OT). Working Place Basic Pay table (WPBP).

Which of the following is an executable payroll schema?. X000. XPPF. X010. XT00.

Which settings can limit the retroactive accounting depth of SAP payroll? Note: There are 3 correct Answers to this question. The start date of the current payroll period. The start date of the current data record for Basic Pay (infotype 8) for the personnel number. The "Earliest personal retroactive accounting date" stored in the Payroll Status infotype (0003) for the personnel number. The hiring date stored for the personnel number. The "Earliest retroactive accounting period" in the Payroll control record.

Which calculation rule determines the valuation of the wage type based on the cumulative average basis?. XVAL. XMOD. X018. X015.

You call up a main schema using transaction PE01 (HR: Maintain Payroll Schemas) and you have several columns available in the editor. What are the names of these columns? Note: There are 3 correct Answers to this question. Parameter. Feature. Line. Return Code. Function.

What transaction do you use to create a new personnel calculation rule?. PA30. PE01. PA03. PE02.

Which of the following are applicable to retroactive accounting? Note: There are 2 correct Answers to this question. You can use the "Forced retro.accounting" data field to trigger a forced retroactive accounting. Every change to customizing data that is relevant for payroll leads to retroactive accounting. A change to master data that is relevant for payroll in the current period automatically leads to retroactive accounting. Every customizing change in the past automatically leads to retroactive accounting when you start payroll.

Which tables can you find in the PC_PAYRESULT transaction? Note: There are 2 correct Answers to this question. Internal Table (IT. Results Table (RT). Bank Transfer (BT). Output Table (OT).

Which variable do you use to import an employee's actual planned working time for each partial period?. A. KDIVP B. ADIVP C. SDIVP. A. KSOLL B. ASOLL C. SSOLL. • KDIVI • ADIVI • SDIVI. • KAU** • AAU** • SAU**.

What condition can be included in an adjustment rule for averages?. Cumulation rule. Time unit. PCR for average formula. Average bases.

In addition to the fixed values from SAP, you want to use customer-specific values of the "Employee subgroup grouping for personnel calculation rule" in your personnel calculation rules. What values can you use for this?. 5 to 9. 00 to 99. 1 to 3. 1 to 4.

What is the purpose of the Payroll Status infotype (IT0003)?. To control an employee's assignment to a payroll area. To determine the assigned payroll schema. To determine the assigned current payroll period. To control the retroactivity of an employee's time evaluation and payroll runs.

Which of the following can be queried using operation OUTWP? Note: There are 3 correct Answers to this question. Personnel areas. Pay scales. Infotypes. Wage types. Cost centers.

You want to calculate wage types /801 and /802. Which personnel calculation rules are accessed by XPPF?. XPPO and XVAL. XPPO and XPP1. XPP1 and XCHO. XCHO and XVAL.

You changed the Organizational Assignment infotype (IT0001) after a productive payroll run. What happens in the next payroll run?. The payroll processes normally. A warning message is displayed. A payroll retroactive calculation occurs. An error message is displayed.

What modifier do you use to group employees for constant valuation (V_T510J) in rule XMOD?. MODIF T. MODIF D. MODIF 1. MODIF 2.

You want to propose a default value for the Pay scale type and Pay scale area (IT 0008) data fields. How can you achieve this?. Use the table V_T510 (TARIF table). Use table V_001P_C (Check Assignment of Pay Scale Structure to Enterprise Structure) if you do NOT use the TARIF feature. Use table V_503 G (Define employee subgroup grouping for primary wage type). Use the LGMST feature.

Some personnel numbers in the payroll are rejected, while others are subject to master data changes in the correction phase. How does the system recalculate these personnel numbers' payroll results in the next payroll run?. Matchcode R is set for these employees. The indicator is set in infotype 0003 (Payroll Status). Matchcode W is set for these employees. The personnel numbers are saved in table v_T549A (Payroll Areas).

What does operation MULTI RAA do?. Multiply the wage type being processed by the amount in the rate field. Multiply the wage type being processed by double the amount in the rate field. Multiply the value of the rate field by the value of the amount field and store the result in the amount field. Multiply the value of the number field by the value of the amount field and store the result in the rate field.

Which function/parameter combination must you activate in a productive payroll schema?. OPT/INFT. OPT/TIME. PGM/ABR. CHECK/ABR.

Where do you define the time/measurement unit for a wage type?. Time wage type selection. Wage type characteristics. Base wage type valuation. Wage type processing class.

Which of the following are attributes of a schema? Note: There are 2 correct Answers to this question. Structure. Processing class. Country grouping. Program class.

Which function does the new average processing perform?. X016. MEANV. PIT X015 GEN. AVERA.

Which operations would you use in a personnel calculation rule (PCR) called by function PIT (Process the IT table) to reduce the amount of a wage type by 10% and also retain it for further processing?. A. AMT 0.90 ADDWT*. AMT* 0.90 ADDWTI. AMT 0.10 ADDWT*. AMT 0.10 ADDWTI*.