IN WHICH MANUAL ARE THE DUTIES AND RESPONSIBILITIES OF THE INCOMING INSPECTOR? QCM. RSM. GMM.
THE AVIANCA QUALITY CONTROL MANUAL HAS BEEN DEVELOPED IN ACCORDANCE: MASTER MINIMUN EQUIPMENT LIST. APPROVED MAINTENANCE MANUAL. AC-145-9, FAR 145.211.
IF ANY PRODUCT OR ARTICLE FAILS TO MEET APPLICABLE REQUIREMENTS DURING THE INCOMING INSPECTION, IT WILL BE: DISCARD. QUARANTINED. STORED.
QUALITY CONTROL AREA PERFORMS AN INTERNAL SELF EVALUATION TO VERIFY THE AVAILABILITY OF HOUSING AND FACILITIES, TECHNICAL DATA, _______________, MATERIALS, TRAINING, PERSONNEL AND OTHER SPECIAL CONSIDERATIONS. CAPABILITY LIST. MAINTENACE REDORDS. DOCUMENTS. TOOL AND EQUIPMENT.
PART 21 OF CFR TALKS ABOUT. AIRWORTHINESS STANDARS: NORMAL CATEGORY ROTORCRAFT. CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS. INVESTIGATIVE AND ENFORCEMENT PROCEDURS.
WHEN NEW CAPABILITIES OR RATINGS ARE GOING TO BE INCLUDED IN THE CAPABILITY LIST, THE QUALITY CONTROL AREA PERFORMS AN INTERNAL_____________ TO VERIFY THAT ALL FAA´S AND OEM´S REQUIREMENTS ARE MET.
TASK. CAPABILITY LIST EVALUATION. SELF EVALUATION. TEST.
WHAT KIND INSPECTION IS ASOCIATED TO THIS PROCEDURE DEFINITION: EVALUATING THE ARTICLES THAT HAVE BEEN INVOLVED IN ACCIDENTS OR INCIDENTS OR NORMAL MAINTENANCE PROCEDURES THAT INCLUDES A SEARCH FOR ANY SECONDARY DAMAGE SUCH AS FIRE OR HEAT DAMAGED. IN-PROCESS INSPECTION. PRELIMINARY INSPECTION. FINAL INSPECTION. HIDDEN DAMAGED INSPECTION.
AVIANCA CRS DEVELOPED THE INCOMING INSPECTION SYSTEM BASED ON: REPAIR STATION MANUAL. FAA AC 20-154. PART 43. ALL ANSWER ARE CORRECT.
IF YOU NEED TO REVIEW AND ISSUE YOUR TRAINING SUMMARY, IN WHICH APN CAN YOU DO IT? 10251. 10083. 10250.
COMPLETE THE FOLLOWING STATEMENT:
“IF ANY TEST EQUIPMENT OR TOOL IS FOUND IN THE REPAIR STATION WITHOUT A CURRENT CALIBRATION LABEL ATTACHED; THE TOOL MUST SEND TO _________, _____________ MUST VERIFY THE CERTIFICATES AND THE CALIBRATION DUE DATE. IF THE CALIBRATION DATE IS CURRENT THE CALIBRATION LABEL MUST BE ATTACHED TO THE TOOL.” STOCKROOM AREA, AN SUPERVISOR. WORKSHOP, AN COORDINATOR. INCOMING INSPECTION, AN INSPECTOR.
IF YOU NEED TO REVIEW ALL THE INFORMATION ABOUT EXPIRATION OF COURSES AND AUTHORIZATIONS, IN WHICH APN CAN YOU DO IT? 10091. 10083. 10250.
IF DURING THE VERIFICATION A TOOL, IS NECESARY CHECK THE TOOL CONDITION AND THE CALIBRATION LABEL. TRUE. FALSE.
IN WHICH DOCUMENT THE FOLLOWING INFORMATION IS SPECIFIED: “LIMITED TO PERFORM MAINTENANCE, PREVENTIVE MAINTENANCE, MINOR/MAJOR REPAIR AND ALTERATIONS, INSPECTIONS, ANY REPLACE OF ARTICLES AND ANY UNSCHEDULED MAINTENANCE OR UP TO SCHEDULED “A” MULTIPLES CHECKS, 7500 FH, 15000, 24 MONTHS, 48 MONTHS, 6 YEARS, 12 YEARS CHECKS OR EQUIVALENT”. OPERATIONS SPECIFICATIONS. CAPABILITY LIST. AIR AGENCY CERTIFICATE.
WHICH FAR PART IS RELATED TO INSPECTION PERSONNEL REQUIREMENTS? 145.151 145.155 145.163.
WHICH PARTS OF FAA REGULATION APPLIES AND AFFECTS AVIANCA´S CERTIFICATED REPAIR STATION. PART 145. PART 43. PART 21. ALL ANSWER ARE CORRECT.
DURING THE PRELIMINARY INSPECTION OF COMPONENTS. WORKSHOP PERSONNEL WILL EVALUATE: EVALUATION TO DETERMINE THE REQUIRED MAINTENANCE ACTIONS. PROPER DOCUMENTACION, IDENTIFICATION AND TRACEABILITY. LIFE LIMITS RECORD IF APPLICABLE. AD´S AND SERVICE BULLETINS RECORDS IF APPLICABLE. A FUNTIONAL TEST MAY BE PERFORMED AS PART OF THE PRELIMINARY INSPECTION IF DEEMED APPROPIATE. ALL ANSWER ARE CORRECT .
ACCORDING TO THE CLASSIFICATION OF TOOLS AND EQUIPMENT. TO WHICH CLASS CORRESPONDS:
EQUIPMENT THAT CALIBRATION IS NOT REQUIRED BUT HAS SPECIFIED PREVENTIVE MAINTENANCE PROCEDURE BY THE MANUFACTURER. THIS EQUIPMET AND TOOLS WILL BE IDENTIFIED WITH A PLACARD THAT ESTABLISHED THE ACCOMPLISHED OF PREVENTIVE MAINTENANCE AND ITS S/N. CLASS 1. CLASS 2. CLASS 3. ALL ANSWER ARE CORRECT.
AT LEAST 5 OPERATIONAL CERTIFICATE WITH WHICH THE REPAIR STATION-ORGANIZACIÓN DE MANTENIMIENTO CERTIFY ITS WORK. CMAE-670, CDF-003, MU1Y335C, MU1Z335K & EASA 145,0027. CMAE-760, CDF-003, MU1Y335K, MU1Z335K & EASA 145,0027. CMAE-670, OMA-003, MU1Y335C, MU1Z335K & EASA 145,0027. ANAC B-145, CDF-003, MU1Y335K, MU1Z335K & EASA 145,0032.
WHICH CARD CERTIFIES THAT A COMPONENT HAS PASSED THE INCOMING INSPECTION? RECEIVING TAG. GREEN TAG. IDENTIFICATION LABEL.
IN WHICH CHAPTER OF THE QCM ARE THE MEASUREMENT AND CALIBRATION EQUIPMENT POLICIES? 8. 9. 10.
CAN A PARTIAL CERTIFICATION OF A REPAIR BE MADE IN A 8130-3 FORM? FALSE. TRUE.
WHICH APNS ARE USED TO SEE FLIGHT HOURS AND FLIGHT CYCLES OF AN AIRCRAFT? (MULTIPLE CHOISE). 206 308 147 1418.
WHAT IS A MAJOR ALTERATION? THAT MAY APPRECIABLY AFFECT THE AIRWORTHINESS DUE TO CHANGES IN WEIGHT AND BALANCE, RESISTANCE BEHAVIOR STRUCTURAL, ENGINE OPERATION, OR FLIGHT CHARACTERISTICS. QUE NO SE PUEDA DAR DE ACUERDO A PRACTICAS ACEPTADAS O QUE NO SE PUEDA HACER POR UNA OPERACIÓN ELEMENTAL. CUALQUIER ALTERACION QUE NO ESTE CLASIFICADA COMO UNA ALTERACION MENOR. A Y B.
ARRANGE IN THE CORRECT ORDER THE INSPECTION PHASES ESTABLISHED ON AVIANCA´S INSPECTION SYSTEM. IN-PROCESS INSPECTION APPROVAL FOR RETURN TO SERVICE HIDDEN DAMAGED INSPECTION PRELIMINARY INSPECTION FINAL INSPECTION.
WHICH ITEMS DO YOU NEED TO ACCOMPLISH TO ADD A NEW CAPABILITY? F-AMO-008 TRAINING, MATERIALS & TOOLS, TECHNICAL DATA, FACILITIES, PERSONAL & MAN POWER. F-AMO-003 MATERIALS & TOOLS, TECHNICAL DATA, FACILITIES, PERSONAL & MAN POWER. F-AMO-003 TRAINING, MATERIALS & TOOLS, TECHNICAL DATA. F-AMO-003 TRAINING, MATERIALS & TOOLS, TECHNICAL DATA, FACILITIES, PERSONAL & MAN POWER.
IF YOU NEED TO SEARCH FOR YOUR TRAINING REQUIREMENTS UNDER FAA REGULATION. TO WHICH MANUAL DO YOU NEED TO REFER? QCM. RSM. RSTPM. MET-TAR.
IF DURING THE VERIFICATION, A TOOL IS FOUND LOST OR MISSING, THE APPROVAL FOR RETURN TO SERVICE CAN BE SIGNED. TRUE. FALSE.
WHAT IS THE “COMPONENT SERVICE REPORT” FORM USE FOR? THE COMPONENT SERVICE REPORT FORM IS USED BY THE WORKSHOP INCOMING INSPECTION AND ITS PURPOSE IS GUIDE THRU THE VARIOUS STEP FROM RECEIVING THE ARTICLE TO RELEASE TO SERVICE THE DISASSEMBLY, TEST/ INSPECTION/REPAIR/OVERHAUL AND ASSEMBLY OF THE ARTICLE IN ORDER TO RECORD THE COMPLIANCE OF THE MAINTENACE PROCESS. THE COMPONENT SERVICE REPORT FORM IS USED BY THE WORKSHOP INCOMING INSPECTION AND ITS PURPOSE IS GUIDE THRU THE VARIOUS STEP FROM RECEIVING THE ARTICLE TO RELEASE TO SERVICE THE DISASSEMBLY, TEST/ INSPECTION/REPAIR/OVERHAUL AND ASSEMBLY OF THE ARTICLE IN ORDER TO RECORD THE COMPLIANCE OF THE INSPECCION PROCESS. THE COMPONENT SERVICE REPORT FORM IS USED BY THE WORKSHOP PERSONEL AND ITS PURPOSE IS GUIDE THRU THE VARIOUS STEP FROM RECEIVING THE ARTICLE TO RELEASE TO SERVICE THE DISASSEMBLY, TEST/ INSPECTION/REPAIR/OVERHAUL AND ASSEMBLY OF THE ARTICLE IN ORDER TO RECORD THE COMPLIANCE OF THE MAINTENACE PROCESS AND INSPECTION PHASES. NONE OF THE ABOVE.
IN ACCORDANCE WITH FAR 43.17 AN AERONAUTICAL PRODUCT MEANS ANY CIVIL AIRCRAFT OR AIRFRAME, AIRCRAFT ENGINE, PROPELLER,APPLIANCE, COMPONENT, OR PART TO BE INSTALLED THEREON. TRUE. FALSE.
WHICH AREA MUST SUPPORT THE INTERCHANGEABILITY OF A TOOL? ENGINEERING. INCOMING INSPECTION.
IN ACCORDANCE WITH CFR PART 21.175 THE AIRWORTHINESS CERTIFICATE ARE DIVIDED INTO: ESTANDAR AIRWORTHINESS CERTIFICATES. XXXXXXXXXX. A Y B.
WHICH IS THE PATH YOU NEED TO FOLLOW IN ORDER TO ACCES AVIANCA´S TRAINING MANUAL (FAA/UAEAC)? ARRANGE IN THE CORRECT ORDER THE SHOWN STEPS, TO REACH THE MENTIONED DOCUMENT. INGIENERIA Y MANTENIMIENTO DOCBOX OFFICE 365 BUSCADOR “RSTPM AVA” OR “PET TAP” TU CONEXIÓN 360.
TO WHICH MANUAL DO YOU NEED TO REFER TO SEE THE FILLING INSTRUCTIONS OF THE FORMS ASSOCIATED TO REGULATORY PROCEDURES (UAEAC)? REPAIR STATION MANUAL. MANUAL DE PROCEDIMIENTOS DE INSPECCION. QUALITY CONTROL MANUAL. AVIANCA AMO's FORMS MANUAL. ALL ANSWERS ARE CORRECT.
WITH WHICH PARTS OF COLOMBIAN AVIATION REGULATION THE INSPECTOR (AIT) MUST BE FAMILIARIZED IN ACCORDANCE WITH THE AVA MANUAL ASSOCIATED? (MULTILPLE CHOISE) PART 65 PART 2 PART 1 PART 18 PART 4.
EVERY SPECIAL OR CALIBRABLE TOOL THAT AFFECTS THE AIRWORTHINESS OF THE AIRCRAFT, USED DURING THE MAINTENANCE SERVICE MUST BE PROPERLY LOADED TO THE WORK ORDER IN WHICH IT WAS USED. TRUE. FALSE.
COMPLETE THE FOLLOWING STATEMENT: ONLY ELECTRONICS, HYDRAULICS OR PNEUMATICS TOOLS AND EQUIPMENT THAT DO NOT REQUIRE CALIBRATION DEFINED BY THE MANUFACTURER, WILL BE IDENTIFIED WITH A LABEL “CALIBRATION NOT REQUIRED” FORM _______________. F-007-93761-9. F-AMO-012. 870-5193670.
COMPLETE THE FOLLOWING STATEMENT: PRECISION TOOL AND TEST EQUIPMENT SHALL START A CALIBRATION PROGRAM AT REGULAR MANUFACTURER OR TECHNICAL STANDARD RECOMMENDED INTERVALS, IF THE ORIGINAL EQUIPMENT MANUFACTURER DOES NOT PROVIDE A CALIBRATION INTERVAL RECOMMENDATION, THE REPAIR STATION WILL USE THE INDUSTRY STANDARD PRACTICE OF ____________. UP TO ONE YEAR. SIX MONTHS. TWO YEARS.
WITH WHICH PARTS OF COLOMBIAN AVIATION REGULATION THE INSPECTOR (AIT) MUST BE FAMILIARIZED IN ACCORDANCE WITH THE AVA MANUAL ASSOCIATED? (MULTILPLE CHOISE). ALL ANSWERS ARE CORRECT. PART 3. PART 13. PART 21.
WHICH IS THE PATH YOU NEED TO FOLLOW IN ORDER TO ACCES AVIANCA´S TRAINING MANUAL (UAEAC)?. ARRANGE IN THE CORRECT ORDER THE SHOWN STEPS, TO REACH THE MENTIONED DOCUMENT. AVIANCA SIGA.AVIANCA.COM PUBLICACIONES VP TECNICA REGULATORY MANUALS TRAINING.
IN WHICH APN THE EXPIRATION DATE OF THE TOOL USED IN A WO IS VERIFIED? 310. 410. 221.
WHICH APN IS USED TO ISSUE A REPORT IN WHICH THE LIMITATIONS OF YOUR ATHORIZATIONS ARE SPECIFIED. 10098. 10091. 10083. 10251.
COMPLETE THE FOLLOWING STATEMENT: CADA TALLER QUE REALIZA CUALQUIER MANTENIMIENTO PREVENTIVO, ALTERACIONES Y/O REPARACIONES REQUERIDAS POR UN PROPIETARIO DE UN CERTIFICADO QUE TENGA UN PROGRAMA DE AERONAVEGABILIDAD CONTINUADA APROBADA POR LA UAEAC, DEBE CUMPLIR CON LO ESTABLECIDO EN LA _______ Y _______ DE LOS ___________ RESPECTIVAMENTE. SECCION 2, SECCION 4, CAPITULOS V Y VI. SECCION 4, SECCION 11, CAPITULOS IV Y VII. SECCION 7, SECCION 4, CAPITULOS V Y VI. SECCION 7 Y CAPITULO V, SECCION 4 Y CAPITULO VI.
|
