Your company recently created an Azure subscription.
You have been tasked with making sure that a specified user is able to implement Azure AD Privileged Identity Management (PIM).
Which of the following is the role you should assign to the user? The Global administrator role.
The Security administrator role.
The Password administrator role.
The Compliance administrator role.
.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has an Active Directory forest with a single domain, named weylandindustries.com. They also have an Azure Active Directory (Azure AD) tenant with the same name.
You have been tasked with integrating Active Directory and the Azure AD tenant. You intend to deploy Azure AD Connect.
Your strategy for the integration must make sure that password policies and user logon limitations affect user accounts that are synced to the Azure AD tenant, and that the amount of necessary servers are reduced.
Solution: You recommend the use of pass-through authentication and seamless SSO with password hash synchronization.
Does the solution meet the goal? Yes
No
.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has an Active Directory forest with a single domain, named weylandindustries.com. They also have an Azure Active Directory (Azure AD) tenant with the same name.
You have been tasked with integrating Active Directory and the Azure AD tenant. You intend to deploy Azure AD Connect.
Your strategy for the integration must make sure that password policies and user logon limitations affect user accounts that are synced to the Azure AD tenant, and that the amount of necessary servers are reduced.
Solution: You recommend the use of federation with Active Directory Federation Services (AD FS).
Does the solution meet the goal? Yes
No
.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has an Active Directory forest with a single domain, named weylandindustries.com. They also have an Azure Active Directory (Azure AD) tenant with the same name.
You have been tasked with integrating Active Directory and the Azure AD tenant. You intend to deploy Azure AD Connect.
Your strategy for the integration must make sure that password policies and user logon limitations affect user accounts that are synced to the Azure AD tenant, and that the amount of necessary servers are reduced.
Solution: You recommend the use of password hash synchronization and seamless SSO.
Does the solution meet the goal? Yes
No
.
Your company has an Active Directory forest with a single domain, named weylandindustries.com. They also have an Azure Active Directory (Azure AD) tenant with the same name.
After syncing all on-premises identities to Azure AD, you are informed that users with a givenName attribute starting with LAB should not be allowed to sync to
Azure AD.
Which of the following actions should you take? You should make use of the Synchronization Rules Editor to create an attribute-based filtering rule. You should configure a DNAT rule on the Firewall. You should configure a network traffic filtering rule on the Firewall. You should make use of Active Directory Users and Computers to create an attribute-based filtering rule.
You have been tasked with applying conditional access policies for your company's current Azure Active Directory (Azure AD).
The process involves assessing the risk events and risk levels.
Which of the following is the risk level that should be configured for users that have leaked credentials? None Low Medium High.
You have been tasked with applying conditional access policies for your company's current Azure Active Directory (Azure AD).
The process involves assessing the risk events and risk levels.
Which of the following is the risk level that should be configured for sign ins that originate from IP addresses with dubious activity? None
Low
Medium
High
.
You have been tasked with configuring an access review, which you plan to assigned to a new collection of reviews. You also have to make sure that the reviews can be reviewed by resource owners.
You start by creating an access review program and an access review control.
You now need to configure the Reviewers.
Which of the following should you set Reviewers to?
Selected users. Members (Self). Group Owners. Anyone.
Your company recently created an Azure subscription. You have, subsequently, been tasked with making sure that you are able to secure Azure AD roles by making use of Azure Active Directory (Azure AD) Privileged Identity Management (PIM).
Which of the following actions should you take FIRST?
You should sign up Azure Active Directory (Azure AD) Privileged Identity Management (PIM) for Azure AD roles. You should consent to Azure Active Directory (Azure AD) Privileged Identity Management (PIM). You should discover privileged roles. You should discover resources.
You need to consider the underlined segment to establish whether it is accurate.
You have been tasked with creating a different subscription for each of your company's divisions. However, the subscriptions will be linked to a single Azure Active
Directory (Azure AD) tenant.
You want to make sure that each subscription has identical role assignments.
You make use of Azure AD Privileged Identity Management (PIM).
Select `No adjustment required` if the underlined segment is accurate. If the underlined segment is inaccurate, select the accurate option.
No adjustment required Azure Blueprints Conditional access policies Azure DevOps.
Your company has an Azure Container Registry.
You have been tasked with assigning a user a role that allows for the uploading of images to the Azure Container Registry. The role assigned should not require more privileges than necessary.
Which of the following is the role you should assign? Owner Contributor AcrPush AcrPull.
Your company has an Azure Container Registry.
You have been tasked with assigning a user a role that allows for the downloading of images from the Azure Container Registry. The role assigned should not require more privileges than necessary.
Which of the following is the role you should assign?
Reader Contributor AcrDelete AcrPull.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your Company's Azure subscription includes a virtual network that has a single subnet configured.
You have created a service endpoint for the subnet, which includes an Azure virtual machine that has Ubuntu Server 18.04 installed.
You are preparing to deploy Docker containers to the virtual machine. You need to make sure that the containers can access Azure Storage resources and Azure
SQL databases via the service endpoint.
You need to perform a task on the virtual machine prior to deploying containers.
Solution: You create an application security group.
Does the solution meet the goal? Yes
No.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your Company's Azure subscription includes a virtual network that has a single subnet configured.
You have created a service endpoint for the subnet, which includes an Azure virtual machine that has Ubuntu Server 18.04 installed.
You are preparing to deploy Docker containers to the virtual machine. You need to make sure that the containers can access Azure Storage resources and Azure
SQL databases via the service endpoint.
You need to perform a task on the virtual machine prior to deploying containers.
Solution: You create an AKS Ingress controller.
Does the solution meet the goal? Yes
No.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your Company's Azure subscription includes a virtual network that has a single subnet configured.
You have created a service endpoint for the subnet, which includes an Azure virtual machine that has Ubuntu Server 18.04 installed.
You are preparing to deploy Docker containers to the virtual machine. You need to make sure that the containers can access Azure Storage resources and Azure
SQL databases via the service endpoint.
You need to perform a task on the virtual machine prior to deploying containers.
Solution: You install the container network interface (CNI) plug-in.
Does the solution meet the goal? Yes
No
.
You make use of Azure Resource Manager templates to deploy Azure virtual machines.
You have been tasked with making sure that Windows features that are not in use, are automatically inactivated when instances of the virtual machines are provisioned.
Which of the following actions should you take? You should make use of Azure DevOps. You should make use of Azure Automation State Configuration. You should make use of network security groups (NSG). You should make use of Azure Blueprints.
Your company's Azure subscription includes Windows Server 2016 Azure virtual machines.
You are informed that every virtual machine must have a custom antimalware virtual machine extension installed. You are writing the necessary code for a policy that will help you achieve this.
Which of the following is an effect that must be included in your code? Disabled
Modify
AuditIfNotExists
DeployIfNotExists
.
Your company makes use of Azure Active Directory (Azure AD) in a hybrid configuration. All users are making use of hybrid Azure AD joined Windows 10 computers.
You manage an Azure SQL database that allows for Azure AD authentication.
You need to make sure that database developers are able to connect to the SQL database via Microsoft SQL Server Management Studio (SSMS). You also need to make sure the developers use their on-premises Active Directory account for authentication. Your strategy should allow for authentication prompts to be kept to a minimum.
Which of the following is the authentication method the developers should use? Azure AD token.
Azure Multi-Factor authentication.
Active Directory integrated authentication.
Active Directory integrated authentication.
.
You have been tasked with enabling Advanced Threat Protection for an Azure SQL Database server.
Advanced Threat Protection must be configured to identify all types of threat detection.
Which of the following will happen if when a faulty SQL statement is generate in the database by an application? A Potential SQL injection alert is triggered. A Vulnerability to SQL injection alert is triggered. An Access from a potentially harmful application alert is triggered. A Brute force SQL credentials alert is triggered.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
You are in the process of creating an Azure Kubernetes Service (AKS) cluster. The Azure Kubernetes Service (AKS) cluster must be able to connect to an Azure
Container Registry.
You want to make sure that Azure Kubernetes Service (AKS) cluster authenticates to the Azure Container Registry by making use of the auto-generated service principal.
Solution: You create an Azure Active Directory (Azure AD) role assignment.
Does the solution meet the goal? Yes No.
Your company has an Azure subscription that includes two virtual machines, named VirMac1 and VirMac2, which both have a status of Stopped (Deallocated).
The virtual machines belong to different resource groups, named ResGroup1 and ResGroup2.
You have also created two Azure policies that are both configured with the virtualMachines resource type. The policy configured for ResGroup1 has a policy definition of Not allowed resource types, while the policy configured for ResGroup2 has a policy definition of Allowed resource types.
You then create a Read-only resource lock on VirMac1, as well as a Read-only resource lock on ResGroup2.
Which of the following is TRUE with regards to the scenario? (Choose all that apply.) You will be able to start VirMac1. You will NOT be able to start VirMac1. You will be able to create a virtual machine in ResGroup2. You will NOT be able to create a virtual machine in ResGroup2.
You have been tasked with delegate administrative access to your company's Azure key vault.
You have to make sure that a specific user can set advanced access policies for the key vault. You also have to make sure that access is assigned based on the principle of least privilege.
Which of the following options should you use to achieve your goal?
Azure Information Protection RBAC Azure AD Privileged Identity Management (PIM) D. Azure DevOps.
You have been tasked with delegate administrative access to your company's Azure key vault.
You have to make sure that a specific user is able to add and delete certificates in the key vault. You also have to make sure that access is assigned based on the principle of least privilege.
Which of the following options should you use to achieve your goal?
A key vault access policy Azure policy Azure AD Privileged Identity Management (PIM) Azure DevOps.
You have an Azure virtual machine that runs Windows Server R2.
You plan to deploy and configure an Azure Key vault, and enable Azure Disk Encryption for the virtual machine.
Which of the following is TRUE with regards to Azure Disk Encryption for a Windows VM?
It is supported for basic tier VMs. It is supported for standard tier VMs. It is supported for VMs configured with software-based RAID systems. It is supported for VMs configured with Storage Spaces Direct (S2D).
You have an Azure virtual machine that runs Ubuntu 16.04-DAILY-LTS.
You plan to deploy and configure an Azure Key vault, and enable Azure Disk Encryption for the virtual machine.
Which of the following is TRUE with regards to Azure Disk Encryption for a Linux VM?
It is NOT supported for basic tier VMs. It is NOT supported for standard tier VMs. OS drive encryption for Linux virtual machine scale sets is supported. Custom image encryption is supported.
You need to consider the underlined segment to establish whether it is accurate.
You have configured an Azure Kubernetes Service (AKS) cluster in your testing environment.
You are currently preparing to deploy the cluster to the production environment.
After disabling HTTP application routing, you want to replace it with an application routing solution that allows for reverse proxy and TLS termination for AKS services via a solitary IP address.
You must create an AKS Ingress controller.
Select `No adjustment required` if the underlined segment is accurate. If the underlined segment is inaccurate, select the accurate option. No adjustment required. a network security group an application security group an Azure Basic Load Balancer.
You want to gather logs from a large number of Windows Server 2016 computers using Azure Log Analytics.
You are configuring an Azure Resource Manager template to deploy the Microsoft Monitoring Agent to all the servers automatically.
Which of the following should be included in the template? (Choose all that apply.) WorkspaceID AzureADApplicationID WorkspaceKey StorageAccountKey.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has Azure subscription linked to their Azure Active Directory (Azure AD) tenant.
As a Global administrator for the tenant, part of your responsibilities involves managing Azure Security Center settings.
You are currently preparing to create a custom sensitivity label.
Solution: You start by altering the pricing tier of the Security Center.
Does the solution meet the goal?
Yes No.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has Azure subscription linked to their Azure Active Directory (Azure AD) tenant.
As a Global administrator for the tenant, part of your responsibilities involves managing Azure Security Center settings.
You are currently preparing to create a custom sensitivity label.
Solution: You start by altering the pricing tier of the Security Center.
Does the solution meet the goal? Yes No.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has Azure subscription linked to their Azure Active Directory (Azure AD) tenant.
As a Global administrator for the tenant, part of your responsibilities involves managing Azure Security Center settings.
You are currently preparing to create a custom sensitivity label.
Solution: You start by integrating Security Center and Microsoft Cloud App Security.
Does the solution meet the goal? Yes No.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company has Azure subscription linked to their Azure Active Directory (Azure AD) tenant.
As a Global administrator for the tenant, part of your responsibilities involves managing Azure Security Center settings.
You are currently preparing to create a custom sensitivity label.
Solution: You start by creating a custom sensitive information type.
Does the solution meet the goal? Yes No.
You have a sneaking suspicion that there are users trying to sign in to resources which are inaccessible to them.
You decide to create an Azure Log Analytics query to confirm your suspicions. The query will detect unsuccessful user sign-in attempts from the last few days.
You want to make sure that the results only show users who had failed to sign-in more than five times.
Which of the following should be included in your query?
The EventID and CountIf() parameters. The ActivityID and CountIf() parameters. The EventID and Count() parameters. The ActivityID and Count() parameters.
Your company uses Azure DevOps with branch policies configured.
Which of the following is TRUE with regards to branch policies? (Choose all that apply.) It enforces your team's change management standards. It controls who can read and update the code in a branch. It enforces your team's code quality. It places a branch into a read-only state.
After creating a new Azure subscription, you are tasked with making sure that custom alert rules can be created in Azure Security Center.
You have created an Azure Storage account.
Which of the following is the action you should take?
You should make sure that Azure Active Directory (Azure AD) Identity Protection is removed. You should create a DLP policy. You should create an Azure Log Analytics workspace. You should make sure that Security Center has the necessary tier configured.
Your company's Azure subscription includes an Azure Log Analytics workspace.
Your company has a hundred on-premises servers that run either Windows Server 2012 R2 or Windows Server 2016, and is linked to the Azure Log Analytics workspace. The Azure Log Analytics workspace is set up to gather performance counters associated with security from these linked servers.
You have been tasked with configuring alerts according to the information gathered by the Azure Log Analytics workspace.
You have to make sure that alert rules allow for dimensions, and that alert creation time should be kept to a minimum. Furthermore, a single alert notification must be created when the alert is created and when the alert is sorted out.
You need to make use of the necessary signal type when creating the alert rules.
Which of the following is the option you should use? You should make use of the Activity log signal type. You should make use of the Application Log signal type. You should make use of the Metric signal type. You should make use of the Audit Log signal type.
Your company's Azure subscription includes a hundred virtual machines that have Azure Diagnostics enabled.
You have been tasked with retrieving the identity of the user that removed a virtual machine fifteen days ago. You have already accessed Azure Monitor.
Which of the following options should you use?
Application Log Metrics Activity Log Logs.
Your company's Azure subscription includes a hundred virtual machines that have Azure Diagnostics enabled.
You have been tasked with analyzing the security events of a Windows Server 2016 virtual machine. You have already accessed Azure Monitor.
Which of the following options should you use? Application Log Metrics Activity Log Logs.
You have been tasked with making sure that you are able to modify the operating system security configurations via Azure Security Center.
To achieve your goal, you need to have the correct pricing tier for Azure Security Center in place.
Which of the following is the pricing tier required? Advanced Premium Standard Free.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company's Azure subscription is linked to their Azure Active Directory (Azure AD) tenant.
After an internally developed application is registered in Azure AD, you are tasked with making sure that the application has the ability to access Azure Key Vault secrets on application the users' behalf.
Solution: You configure a delegated permission with admin consent.
Does the solution meet the goal? Yes No.
Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.
Your company's Azure subscription is linked to their Azure Active Directory (Azure AD) tenant.
After an internally developed application is registered in Azure AD, you are tasked with making sure that the application has the ability to access Azure Key Vault secrets on application the users' behalf.
Solution: You configure a delegated permission with no admin consent.
Does the solution meet the goal?
Yes No.
You need to consider the underlined segment to establish whether it is accurate.
Your Azure Active Directory Azure (Azure AD) tenant has an Azure subscription linked to it.
Your developer has created a mobile application that obtains Azure AD access tokens using the OAuth 2 implicit grant type.
The mobile application must be registered in Azure AD.
You require a redirect URI from the developer for registration purposes.
Select `No adjustment required` if the underlined segment is accurate. If the underlined segment is inaccurate, select the accurate option. No adjustment required a secret a login hint a client ID.
You are in the process of configuring an Azure policy via the Azure portal.
Your policy will include an effect that will need a managed identity for it to be assigned.
Which of the following is the effect in question? AuditIfNotExist Disabled DeployIfNotExist EnforceOPAConstraint.
You have been tasked with creating an Azure key vault using PowerShell. You have been informed that objects deleted from the key vault must be kept for a set period of 90 days.
Which two of the following parameters must be used in conjunction to meet the requirement? (Choose two.)
EnabledForDeployment EnablePurgeProtection EnabledForTemplateDeployment EnableSoftDelete.
DRAG DROP -
Your company has an Azure SQL database that has Always Encrypted enabled.
You are required to make the relevant information available to application developers to allow them to access data in the database.
Which two of the following options should be made available? Answer by dragging the correct options from the list to the answer area.
Select and Place:.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Sub1.
You have an Azure Storage account named sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in sa1 by using several shared access signatures (SASs) and stored access policies.
You discover that unauthorized users accessed both the file service and the blob service.
You need to revoke all access to sa1.
Solution: You create a new stored access policy.
Does this meet the goal? Yes No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (Azure AD).
You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials.
You need to configure the environment to support the planned authentication.
Solution: You deploy the On-premises data gateway to the on-premises network.
Does this meet the goal?
Yes No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (Azure AD).
You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials.
You need to configure the environment to support the planned authentication.
Solution: You create a site-to-site VPN between the virtual network and the on-premises network.
Does this meet the goal? Yes No.
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com.
You plan to deploy Azure AD Connect and to integrate Active Directory and the Azure AD tenant.
You need to recommend an integration solution that meets the following requirements:
✑ Ensures that password policies and user logon restrictions apply to user accounts that are synced to the tenant
✑ Minimizes the number of servers required for the solution.
Which authentication method should you include in the recommendation?
A. federated identity with Active Directory Federation Services (AD FS)
B. password hash synchronization with seamless single sign-on (SSO)
C. pass-through authentication with seamless single sign-on (SSO) federated identity with Active Directory Federation Services (AD FS) password hash synchronization with seamless single sign-on (SSO) pass-through authentication with seamless single sign-on (SSO).
Your network contains an on-premises Active Directory domain named corp.contoso.com.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com.
You sync all on-premises identities to Azure AD.
You need to prevent users who have a givenName attribute that starts with TEST from being synced to Azure AD. The solution must minimize administrative effort.
What should you use? Synchronization Rules Editor Web Service Configuration Tool the Azure AD Connect wizard Active Directory Users and Computers.
DRAG DROP -
You are implementing conditional access policies.
You must evaluate the existing Azure Active Directory (Azure AD) risk events and risk levels to configure and implement the policies.
You need to identify the risk level of the following risk events:
✑ Users with leaked credentials
✑ Impossible travel to atypical locations
✑ Sign-ins from IP addresses with suspicious activity
Which level should you identify for each risk event? To answer, drag the appropriate levels to the correct risk events. Each level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place: Medium High Low Medium High Medium.
You create and enforce an Azure AD Identity Protection user risk policy that has the following settings:
✑ Assignment: Include Group1, Exclude Group2
✑ Conditions: Sign-in risk of Medium and above
✑ Access: Allow access, Require password change
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area: Box 1: Yes -
User1 is member of Group1. Sign in from unfamiliar location is risk level Medium. Box 2: Yes -
User2 is member of Group1. Sign in from anonymous IP address is risk level Medium. Sign-ins from IP addresses with suspicious activity is low.
DRAG DROP -
You need to configure an access review. The review will be assigned to a new collection of reviews and reviewed by resource owners.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place: Create an access review program Set Reviewers to Selected users Create an access review audit Create an access review control Set Reviewers to Group owners Set Reviewers to Members.
You have an Azure Active Directory (Azure AD) tenant named contoso.com. The tenant contains the users shown in the following table.
You configure an access review named Review1 as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area: Box 1 - User3 only Box 2 - User3 will receive a confirmation request.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com.
An administrator named Admin1 has access to the following identities:
✑ An OpenID-enabled user account
✑ A Hotmail account
✑ An account in contoso.com
✑ An account in an Azure AD tenant named fabrikam.com
You plan to use Azure Account Center to transfer the ownership of Sub1 to Admin1.
To which accounts can you transfer the ownership of Sub1? contoso.com only contoso.com, fabrikam.com, and Hotmail only contoso.com and fabrikam.com only contoso.com, fabrikam.com, Hotmail, and OpenID-enabled user account.
HOTSPOT -
Your company has two offices in Seattle and New York. Each office connects to the Internet by using a NAT device. The offices use the IP addresses shown in the following table. Box 1: Yes -
Box 2: No -
Box 3: No -
The New York IP address subnet is included in the "skip multi-factor authentication for request.
Your company plans to create separate subscriptions for each department. Each subscription will be associated to the same Azure Active Directory (Azure AD) tenant.
You need to configure each subscription to have the same role assignments.
What should you use? Azure Security Center Azure Policy Azure AD Privileged Identity Management (PIM) Azure Blueprints.
HOTSPOT -
You have an Azure Container Registry named Registry1.
You add role assignments for Registry1 as shown in the following table.
Which users can upload images to Registry1 and download images from Registry1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. Box 1: User1 and User4 only -
Owner, Contributor and AcrPush can push images. Box 2: User1, User2, and User4 -
All, except AcrImagineSigner, can download/pull images.
You have an Azure subscription.
You create an Azure web app named Contoso1812 that uses an S1 App Service plan.
You plan to -
create a CNAME DNS record for www.contoso.com that points to Contoso1812.
You need to ensure that users can access Contoso1812 by using the https://www.contoso.com URL.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. Turn on the system-assigned managed identity for Contoso1812. Add a hostname to Contoso1812. Scale out the App Service plan of Contoso1812. Add a deployment slot to Contoso1812. Scale up the App Service plan of Contoso1812. Upload a PFX file to Contoso1812.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Sub1.
You have an Azure Storage account named sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in sa1 by using several shared access signatures (SASs) and stored access policies.
You discover that unauthorized users accessed both the file service and the blob service.
You need to revoke all access to sa1.
Solution: You create a lock on sa1.
Does this meet the goal? Yes No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (Azure AD).
You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials.
You need to configure the environment to support the planned authentication.
Solution: You deploy Azure Active Directory Domain Services (Azure AD DS) to the Azure subscription.
Does this meet the goal? Yes No.
Your network contains an Active Directory forest named contoso.com. You have an Azure Active Directory (Azure AD) tenant named contoso.com.
You plan to configure synchronization by using the Express Settings installation option in Azure AD Connect.
You need to identify which roles and groups are required to perform the planned configuration. The solution must use the principle of least privilege.
Which two roles and groups should you identify? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. the Domain Admins group in Active Directory the Security administrator role in Azure AD the Global administrator role in Azure AD the User administrator role in Azure AD the Enterprise Admins group in Active Directory.
DRAG DROP -
You create an Azure subscription with Azure AD Premium P2.
You need to ensure that you can use Azure Active Directory (Azure AD) Privileged Identity Management (PIM) to secure Azure AD roles.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place: Discover privileged roles Sign up PIM for Azure AD roles Consent to PIM Discover resources Verify your identityy by using multi.factor authentication (MFA).
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (Azure AD).
You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials.
You need to configure the environment to support the planned authentication.
Solution: You deploy an Azure AD Application Proxy.
Does this meet the goal?
Yes No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Sub1.
You have an Azure Storage account named sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in sa1 by using several shared access signatures (SASs) and stored access policies.
You discover that unauthorized users accessed both the file service and the blob service.
You need to revoke all access to sa1.
Solution: You regenerate the Azure storage account access keys.
Does this meet the goal? Yes No.
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.
Azure AD Privileged Identity Management (PIM) is enabled for the tenant.
In PIM, the Password Administrator role has the following settings:
✑ Maximum activation duration (hours): 2
✑ Send email notifying admins of activation: Disable
✑ Require incident/request ticket number during activation: Disable
✑ Require Azure Multi-Factor Authentication for activation: Enable
✑ Require approval to activate this role: Enable
✑ Selected approver: Group1
You assign users the Password Administrator role as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area: Box 1: Yes -
Active assignments don't require the member to perform any action to use the role. Members assigned as active have the privileges assigned to the role at all times. Box 2: Yes -
While Multi-Factor Authentication is disabled for User2 and the setting Require Azure Multi-Factor Authentication for activation is enabled, User2 can request the role but will need to enable MFA to use the role.
Note: Eligible assignments require the member of the role to perform an action to use the role. Actions might include performing a multi-factor authentication
(MFA) check, providing a business justification, or requesting approval from designated approvers. Box 3: No -
User3 is Group1, which is a Selected Approver Group, however, self-approval is not allowed and someone else from group is required to approve the request.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-resource-roles-assign-roles.
You have a hybrid configuration of Azure Active Directory (Azure AD) that has Single Sign-On (SSO) enabled. You have an Azure SQL Database instance that is configured to support Azure AD authentication.
Database developers must connect to the database instance from the domain joined device and authenticate by using their on-premises Active Directory account.
You need to ensure that developers can connect to the instance by using Microsoft SQL Server Management Studio. The solution must minimize authentication prompts.
Which authentication method should you recommend? Active Directory - Password Active Directory - Universal with MFA support SQL Server Authentication Active Directory - Integrated.
You plan to use Azure Resource Manager templates to perform multiple deployments of identically configured Azure virtual machines. The password for the administrator account of each deployment is stored as a secret in different Azure key vaults.
You need to identify a method to dynamically construct a resource ID that will designate the key vault containing the appropriate secret during each deployment.
The name of the key vault and the name of the secret will be provided as inline parameters.
What should you use to construct the resource ID? a key vault access policy a linked template a parameters file an automation account.
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant that contains the users shown in the following table.
The tenant contains the named locations shown in the following table.
You create the conditional access policies for a cloud app named App1 as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point. No Yes No.
HOTSPOT -
You have an Azure subscription named Sub 1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com. The tenant contains the users shown in the following table.
Each user is assigned an Azure AD Premium P2 license.
You plan to onboard and configure Azure AD Identity Protection.
Which users can onboard Azure AD Identity Protection, remediate users, and configure policies? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
User1 only User1 and User2 only.
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant that contains the users shown in the following table.
From Azure AD Privileged Identity Management (PIM), you configure the settings for the Security Administrator role as shown in the following exhibit.
From PIM, you assign the Security Administrator role to the following groups:
✑ Group1: Active assignment type, permanently assigned
✑ Group2: Eligible assignment type, permanently eligible
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
Box 1: No -
User1 is a member of Group1. Group1: Active assignment type, permanently assigned Box 2: Yes -
Active Type: A role assignment that doesn't require a user to perform any action to use the role. Users assigned as active have the privileges assigned to the role Box 3: No -
User3 is member of Group1 and Group2.
Group1: Active assignment type, permanently assigned
Group2: Eligible assignment type, permanently eligible
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-configure https://docs.microsoft.com/bs-cyrl-ba/azure/active-directory/privileged-identity-management/pim-resource-roles-configure-role-settings.
HOTSPOT -
Your company has an Azure subscription named Subscription1 that contains the users shown in the following table.
The company is sold to a new owner.
The company needs to transfer ownership of Subscription1.
Which user can transfer the ownership and which tool should the user use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: Box 1; User2 -
Billing Administrator -
Select Transfer billing ownership for the subscription that you want to transfer.
Enter the email address of a user who's a billing administrator of the account that will be the new owner for the subscription.
Box 2: Azure Account Center -
Azure Account Center can be used.
Reference:
https://docs.microsoft.com/en-us/azure/billing/billing-subscription-transfer#transfer-billing-ownership-of-an-azure-subscription.
SIMULATION -
The developers at your company plan to create a web app named App10598168 and to publish the app to https://www.contoso.com.
You need to perform the following tasks:
✑ Ensure that App10598168 is registered to Azure Active Directory (Azure AD).
✑ Generate a password for App10598168.
To complete this task, sign in to the Azure portal.
Correct Answer: See the explanation below.
Step 1: Register the Application
1. Sign in to your Azure Account through the Azure portal.
2. Select Azure Active Directory.
3. Select App registrations.
4. Select New registration.
5. Name the application App10598168 . Select a supported account type, which determines who can use the application. Under Redirect URI, select Web for the type of application you want to create. Enter the URI: https://www.contoso.com , where the access token is sent to.
6. Click Register
Step 2: Create a new application secret
If you choose not to use a certificate, you can create a new application secret.
7 Select Certificates & secrets.
8. Select Client secrets -> New client secret.
9. Provide a description of the secret, and a duration. When done, select Add.
After saving the client secret, the value of the client secret is displayed. Copy this value because you aren't able to retrieve the key later. You provide the key value with the application ID to sign in as the application. Store the key value where your application can retrieve it.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/develop/howto-create-service-principal-portal.
SIMULATION -
You need to create a new Azure Active Directory (Azure AD) directory named 11641655.onmicrosoft.com and a user named User1 in the new directory. The solution must ensure that User1 is enabled for Azure Multi-Factor Authentication (MFA).
To complete this task, sign in to the Azure portal.
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant that contains the users shown in the following table.
You create and enforce an Azure AD Identity Protection sign-in risk policy that has the following settings:
✑ Assignments: Include Group1, exclude Group2
✑ Conditions: Sign-in risk level: Medium and above
✑ Access Allow access, Require multi-factor authentication
You need to identify what occurs when the users sign in to Azure AD.
What should you identify for each user? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: Be prompted for MFA Be blocked Be blocked.
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant that contains the users shown in the following table.
In Azure AD Privileged Identity Management (PIM), the Role settings for the Contributor role are configured as shown in the exhibit. (Click the Exhibit tab.)
You assign users the Contributor role on May 1, 2019 as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
Yes Yes Yes.
HOTSPOT -
You work at a company named Contoso, Ltd. that has the offices shown in the following table.
Contoso has an Azure Active Directory (Azure AD) tenant named contoso.com. All contoso.com users have Azure Multi-Factor Authentication (MFA) enabled. The tenant contains the users shown in the following table.
The multi-factor authentication settings for contoso.com are configured as shown in the following exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
No Yes Yes.
You have an Azure subscription.
You configure the subscription to use a different Azure Active Directory (Azure AD) tenant.
What are two possible effects of the change? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
Role assignments at the subscription level are lost. Virtual machine managed identities are lost. Virtual machine disk snapshots are lost. Existing Azure resources are deleted.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Sub1.
You have an Azure Storage account named sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in sa1 by using several shared access signatures (SASs) and stored access policies.
You discover that unauthorized users accessed both the file service and the blob service.
You need to revoke all access to sa1.
Solution: You generate new SASs.
Does this meet the goal? Yes No.
You have an Azure subscription that contains virtual machines.
You enable just in time (JIT) VM access to all the virtual machines.
You need to connect to a virtual machine by using Remote Desktop.
What should you do first? From Azure Directory (Azure AD) Privileged Identity Management (PIM), activate the Security administrator user role. From Azure Active Directory (Azure AD) Privileged Identity Management (PIM), activate the Owner role for the virtual machine. From the Azure portal, select the virtual machine, select Connect, and then select Request access. From the Azure portal, select the virtual machine and add the Network Watcher Agent virtual machine extension.
HOTSPOT -
Your network contains an on-premises Active Directory domain that syncs to an Azure Active Directory (Azure AD) tenant. The tenant contains the users shown in the following table.
The tenant contains the groups shown in the following table.
You configure a multi-factor authentication (MFA) registration policy that has the following settings:
✑ Assignments:
- Include: Group1
- Exclude: Group2
✑ Controls: Require Azure MFA registration
✑ Enforce Policy: On
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area: Yes No Yes.
SIMULATION -
The developers at your company plan to publish an app named App11641655 to Azure.
You need to ensure that the app is registered to Azure Active Directory (Azure AD). The registration must use the sign-on URLs of https://app.contoso.com.
To complete this task, sign in to the Azure portal and modify the Azure resources.
Step 1: Register the Application
1. Sign in to your Azure Account through the Azure portal.
2. Select Azure Active Directory.
3. Select App registrations.
4. Select New registration.
5. Name the application App11641655. Select a supported account type, which determines who can use the application. Under Redirect URI, select Web for the type of application you want to create. Enter the URI: https://app.contoso.com , where the access token is sent to.
6. Click Register
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/develop/howto-create-service-principal-portal.
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
The User administrator role is assigned to a user named Admin1.
An external partner has a Microsoft account that uses the user1@outlook.com sign in.
Admin1 attempts to invite the external partner to sign in to the Azure AD tenant and receives the following error message: `Unable to invite user user1@outlook.com Generic authorization exception.`
You need to ensure that Admin1 can invite the external partner to sign in to the Azure AD tenant.
What should you do? From the Roles and administrators blade, assign the Security administrator role to Admin1. From the Organizational relationships blade, add an identity provider. From the Custom domain names blade, add a custom domain. From the Users blade, modify the External collaboration settings.
You have an Azure Active Directory (Azure AD) tenant.
You have the deleted objects shown in the following table.
On May 4, 2020, you attempt to restore the deleted objects by using the Azure Active Directory admin center.
Which two objects can you restore? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point. Group1 Group2 User2 User1.
HOTSPOT -
You have an Azure subscription named Subscription1 that contains the resources shown in the following table.
You create an Azure role by using the following JSON file.
You assign Role1 to User1 for RG1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area: Yes No No.
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains a user named User1.
You plan to publish several apps in the tenant.
You need to ensure that User1 can grant admin consent for the published apps.
Which two possible user roles can you assign to User1 to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
Security administrator Cloud application administrator Application administrator User administrator Application developer.
You have an Azure subscription that is associated with an Azure Active Directory (Azure AD) tenant.
When a developer attempts to register an app named App1 in the tenant, the developer receives the error message shown in the following exhibit.
You need to ensure that the developer can register App1 in the tenant.
What should you do for the tenant? Modify the Directory properties. Set Enable Security defaults to Yes. Configure the Consent and permissions settings for enterprise applications. Modify the User settings.
You have an Azure subscription that contains an Azure Active Directory (Azure AD) tenant and a user named User1.
The App registrations settings for the tenant are configured as shown in the following exhibit.
You plan to deploy an app named App1.
You need to ensure that User1 can register App1 in Azure AD. The solution must use the principle of least privilege.
Which role should you assign to User1? App Configuration Data Owner for the subscription Managed Application Contributor for the subscription Cloud application administrator in Azure AD Application developer in Azure AD.
You have the Azure virtual machines shown in the following table.
Each virtual machine has a single network interface.
You add the network interface of VM1 to an application security group named ASG1.
You need to identify the network interfaces of which virtual machines you can add to ASG1.
What should you identify? VM2 only VM2 and VM3 only VM2, VM3, VM4, and VM5 VM2, VM3, and VM5 only.
You have an Azure subscription named Subcription1 that contains an Azure Active Directory (Azure AD) tenant named contoso.com and a resource group named
RG1.
You create a custom role named Role1 for contoso.com.
Where you can use Role1 for permission delegation?
A. contoso.com only
B. contoso.com and RG1 only
C. contoso.com and Subscription1 only
D. contoso.com, RG1, and Subscription1 contoso.com only contoso.com and RG1 only contoso.com and Subscription1 only contoso.com, RG1, and Subscription1.
You have an Azure subscription.
You enable Azure Active Directory (Azure AD) Privileged Identity Management (PIM).
Your company's security policy for administrator accounts has the following conditions:
✑ The accounts must use multi-factor authentication (MFA).
✑ The accounts must use 20-character complex passwords.
✑ The passwords must be changed every 180 days.
✑ The accounts must be managed by using PIM.
You receive multiple alerts about administrators who have not changed their password during the last 90 days.
You need to minimize the number of generated alerts.
Which PIM alert should you modify?
Roles are being assigned outside of Privileged Identity Management Roles don't require multi-factor authentication for activation Administrators aren't using their privileged roles Potential stale accounts in a privileged role.
Your network contains an on-premises Active Directory domain named adatum.com that syncs to Azure Active Directory (Azure AD). Azure AD Connect is installed on a domain member server named Server1.
You need to ensure that a domain administrator for the adatum.com domain can modify the synchronization options. The solution must use the principle of least privilege.
Which Azure AD role should you assign to the domain administrator?
Security administrator Global administrator User administrator.
You have an Azure subscription that contains the users shown in the following table.
Which users can enable Azure AD Privileged Identity Management (PIM)? User2 and User3 only User1 and User2 only User2 only User1 only.
You have an Azure subscription.
You plan to create a custom role-based access control (RBAC) role that will provide permission to read the Azure Storage account.
Which property of the RBAC role definition should you configure? NotActions [] DataActions [] AssignableScopes [] Actions [].
You have an Azure subscription linked to an Azure Active Directory Premium Plan 1 tenant.
You plan to implement Azure Active Directory (Azure AD) Identity Protection.
You need to ensure that you can configure a user risk policy and a sign-in risk policy.
What should you do first?
A. Purchase Azure Active Directory Premium Plan 2 licenses for all users.
B. Register all users for Azure Multi-Factor Authentication (MFA).
C. Enable security defaults for Azure AD.
D. Upgrade Azure Security Center to the standard tier. Purchase Azure Active Directory Premium Plan 2 licenses for all users. Register all users for Azure Multi-Factor Authentication (MFA). Enable security defaults for Azure AD. Upgrade Azure Security Center to the standard tier.
HOTSPOT -
You have the hierarchy of Azure resources shown in the following exhibit.
RG1, RG2, and RG3 are resource groups.
RG2 contains a virtual machine named VM2.
You assign role-based access control (RBAC) roles to the users shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area: Yes Yes No.
HOTSPOT -
You plan to implement an Azure function named Function1 that will create new storage accounts for containerized application instances.
You need to grant Function1 the minimum required privileges to create the storage accounts. The solution must minimize administrative effort.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: A system assigned managed identity Custom role based access control RBAC.
You have an Azure subscription that is linked to an Azure Active Directory (Azure AD) tenant.
From the Azure portal, you register an enterprise application.
Which additional resource will be created in Azure AD? a service principal an X.509 certificate a managed identity a user account.
HOTSPOT -
You have an Azure Active Directory (Azure AD) tenant that contains the resources shown in the following table.
User2 is the owner of Group2.
The user and group settings for App1 are configured as shown in the following exhibit.
You enable self-service application access for App1 as shown in the following exhibit.
User3 is configured to approve access to App1.
You need to identify the owners of Group2 and the users of App1.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: User2 Only Group1 and Group2 members only.
HOTSPOT -
You have a management group named Group1 that contains an Azure subscription named sub1. Sub1 has a subscription ID of 11111111-1234-1234-1234-
1111111111.
You need to create a custom Azure role-based access control (RBAC) role that will delegate permissions to manage the tags on all the objects in Group1.
What should you include in the role definition of Role1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: Microsof resouces suscriptions 111111111111.
|
