Cambios de plaza

Expansion of the crack stop hole is accomplished using a tooling set related to the Standard Tool Diameter Number (STDN). Positioning of Crack Stop Holes for Cracks less than 6 mm (0.236 in.) in a part with a thickness less than 6.4 mm (0.252 in.). Use an eddy current technique to establish the crack direction and, where possible, the location of the crack tips on both surfaces of the concerned component. The word "accomplished" means: Select one: a. invented. b. stopped. c. achieved.

Hidden cracks cannot be seen with ease. They can be included with other types of damage, such as dents, nicks, gouges, scratches, cracks, and punctures. What does "hidden" mean?. Not easily found or recognized. Difficult to repair. Easy to recognize.

Select the correct sentence. Select one: a. The Citra Safe and the hydraulic oil are poisonous, flammable and skin irritant. b. The Citra Safe and the hydraulic oil are harmless, flammable and skin irritant. c. The Citra Safe and the hydraulic oil are nonpoisonous, flammable and skin irritant.

Slight tear or break in metal surface from light, momentary contact by foreign material. Select the correct option. Select one: a. Scratch. b. Gouge. c. Dent.

Hidden cracks cannot be seen with ease. They can be included with other types of damage, such as dents, nicks, gouges, scratches, cracks, and punctures.What does "hidden" mean? Select one: a. Easy to recognize. b. Not easily found or recognized. c. Difficult to repair.

Select the correct sentence. Select one: a. Do not breathe the gas. b. Do not taste the gas. c. Do not touch the gas.

When you repair large components, make sure that you use the applicable tool fixtures. This will help to __________ distortion or delamination of the structure. Prevented. Prevent. prevents.

Which word means "first or highest in rank, quality, or importance?" Select one: b. necessary. a. primary. b. necessary. c. internal.

(1) ________ the correct protective gloves and filter mask when you (2) ________, abrade or (3) ________ composite materials. The dust from composite materials can (4) ________ into your lungs or onto your skin and cause you injury. Immediately remove dust with a vacuum cleaner. Select the correct option to complete the text above. Select one: a. (1) cut – (2) drill – (3) wear – (4) get. b. (1) wear – (2) cut – (3) drill – (4) get. c. (1) drill – (2) get – (3) wear – (4) cut.

The tap testing procedure consists of lightly tapping the surface of the part with a coin, light special hammer with a maximum of 2 ounces, or any other suitable object. The acoustic response is compared with that of a known good area. What can you use to make the tap testing instead of a coin or special hammer? Select one: a. An unfitting object. b. An improper object. c. A suitable object.

_______________ a visual check to make sure that the parts have a layer of lubricant all over them. Select one: a. Make sure. b. Let. c. Do.

________the primer coatings and ________ coatings to the repair area. Select the correct option to complete the sentence above. Select one: a. Apply – paint. b. Use – apply. c. Put – remove.

Select the correct order: clean up / the damage / by / power tools. clean up / the damage / by / sanding / or with / power tools. clean up / or withor with / sanding.

Recommended Procedure. Obtain a piece of scrap metal to use as a test piece; this should be similar in type and thickness as the material that is to be used for the repair. Obtain also a fastener of the same type and diameter as the ones to be installed. What do you need to get to start the task? Select one: a. scrap metal, a fastener. b. A fastener. c. Material, a fastener.