1. You have created two freight units for customer A and two freight units tor customer B. You have defined the transportation network (see attached diagram) and no incompatibilities exist. How many freigth order 1 2 3 4.
You want to configure a scenario in which one trailer is coupled subsequently to different trucks. Which of the following must you customize?
Note: there are 2 correct answers to this question.
Freight booking type Forwarding order type Transportation unit type Freight order type .
You want to optimize the load that you have planned for one of your trucks from which of the following can you start the load planning function? Note: there are 2 correct answers to this question. Freight order Vehicle resource Freight booking Transportation cockpit .
Which transactions can you use to run the path finder?
Note: there are 2 correct answers to this question.
Explanation tool Carrier selection Edit freight order Transportation network cockpit.
A carrier has an agreement with a shipper on January 1 st, for fuel price as 5% of the base treight. Fuel surcharge is pegged to the current price of 3 USD a gallon. The fuel surcharge can change proportionally based on the fuel price on the pricing date. How will you define fuel surcharge calculation in SAP TM?
Note: there are 2 correct answers to this question.
Use a calculation reference for the fuel surcharge charge item Use a rate table determination rule for fuel surcharge Use an index table for the fuel surcharge charge item Use a rate table for fuel surcharge with pricing date as a scale.
Which of the following profiles is directly assigned to an organizational unit?
Distribution profile Calculation profile Charges profile Settlement profile.
7. When using dispute management, which activities can a carrier perform in the carrier collaboration
portal? Note: there are 2 correct answers to this question. Add a detention charge Change the document currency Change the quantity of a charge line’s calculation base Upload files.
8. You are not able to create a service entry sheet (SES) in SAP ERP from a freight settlement document. Which of the following element should you check in SAP ERP to identify the error? Inbound IDoc settings Post processing framework (PPF) Message log XML inbound messages Agency billing settings Answe.
Which documents are created in SAP ERP when you transfer a freight settlement document from SAP TM to SAP ERP when cost distribution is NOT enabled?
Note: There are 2 correct answers to this question. Agency billing document Carrier invoice Purchase order Service entry sheet Answer.
What do you need to do when creating a custom calculation base? Implement a new helper class Define a resolution base for the calculation base Define a scale base for the calculation base Define a new charge type for the calculation base.
To which of the following can you assign a dimensional weight profile? Charge profile Calculation profile Charge type Calculation base.
You want to ensure that the system interprets rates entered into the rate table as percentages where can you make this setting? In the instruction type In the calculation sheet In the scale In the charge type.
You want to set up charge calculation for freight orders. Valid charges should consist of a based on the distance and gross weight of the freight order, and a supplemental charge per container that is included in the freight order. Multiple containers are allowed for each treight order, and the charge is based on the container type can be small, medium or large. What is the minimum number of charge lines with instruction type "standard" that you must set up?
2 3 4 5.
Which ot the following SAP TM and SAP ERP objects can you map? Note: there are 2 correct answers to this question.
SAP TM purchasing organization to SAP ERP plant SAP TM charge category to SAP ERP G/L account SAP TM charge type to SAP ERP service material group SAP TM charge type to SAP ERP service master Answer.
You add an assessorial charge to a freight order after the freight settlement document (FSD) has been transferred and accruals have been posted in SAP ERP. The background report to create FSDs determines the change strategy "reverse and repost with new FSD’ for this freight order. What will you see in SAP TM and SAP ERP?
Note: there are 2 correct answers to this question.
3 Service entry sheets in SAP ERP 2 FSDs and a credit memo in SAP TM 2 service entry sheets in SAP ERP 2 FSDs in SAP TM .
You run the report to delete a one-time location that was used in a forwarding order. After the report is finished the location is NOT deleted. What could be the reason for this?
There are still messages in the incoming queue.
B.SAP ERP is the leading system tor the master data of this location There are still existing orders tor the location The location is part of an active core interface (CIF) integration model.
Which of the following functions can a carrier perform in the collaboration ponal?
Note: there are 2 correct answers to this question.
Respond to new freight agreement RFQs Enter vehicle registration number for a freight order Create an invoice for air shipments Report events for ocean shipments.
18. You transfer two SAP ERP sales order for the same customer with the same delivery date to SAP TM Both sales order contains three items Based on customizing freight units are built automatically The freight unit building rule that is used contains the strategy "Consolidate as much as possible"
No incompatibilities exist
What is the minimum number of freight units that are created?
1 2 3 6.
19. Which of the following are master data elements in SAP TM? Note: There are 2 correct answers to this question.
Calculation profile Calculation sheet Carrier profile Means of transport .
You are assigning organization A to a Freight order. Which of the following organizational unit
functions can you assign to organization A to accomplish this?
Note: There are 2 correct answers to this question.
Company Forwarding house Purchasing organization Sales organization.
In which object can you track and trace the whole journey of your goods?
Freight booking Forwarding order Freight unit Freight order.
You have defined several means of transport (MTr) combinations. If food is loaded on the truck, you cannot transport hazardous goods in a coupled trailer. Furthermore, these hazardous goods cannot be transposed on certain means of transport. Which of the following incompatibility types do you use to model this scenario? Note: there are 2 correct answers to this question.
FU-FU (Compartment level) FU-FU (MTR combination level) FU-FU (Vehicle level) FU Vehicle resource.
You create a freight settlement document after you plan an inbound delivery with the following items: the total freight costs are USD 3000.Which posting can be automatically performed for product2 if you transfer the freight settlement document with the distrusted costs to SAP ERP? .USD 1800 on Material Account USD 1500 on CO-PA USD 3000 on Material Account USD 1200 on CO-PA.
How can you initiate carrier selection?
Note: there are 2 correct answers to this question. Execute report/SCMTMS/BACKGRND PLN From the collaboration portal From the freight booking user interface From the container unit user interface .
How is the freight order type determined for a freight unit that you convert to a freight order using direct shipment options? Based on the freight order type in the freight unit building rule. Based on the freight order type maintained in a condition in the planning profile Based on the freight order type maintained in the corresponding freight unit type Based on the freight order type from a dropdown list.
What do you need to maintain to ensure that certain products are always shipped by air? Allocations Instructions Incompatibilities Compartments.
Your customers wants to use the cost distribution function to include transportation costs in the material valuation. Which of the following SAP ERP documents can support this requirement? Note: There are 3 correct answers to this question.
Stock transport order Inbound delivery Outbound delivery Purchase order Sales order.
Assuming an agreement determination conditions is NOT used, which of the following involved parties determine the correct freight agreement for charge calculation in a freight order?
Note: There are 2 correct answers to this question. Carrier Ordering pany Purchasing organization Forwarding house .
Which of the following systems integrate with SAP TM? Note: There are 3 correct answers to this question.
SAP Environment health & safety SAP Customer relation management SAP Supplier network collaboration SAP Integrated business planning SAP Business warehouse.
Which of the following are standard integration scenarios between SAP ERP and SAP TM?
Note: there are 3 correct answers to this question.
SAP TM forwarding settlement document with SAP ERP purchase order. SAP ERP Stock transpon order with SAP TM order-based transportation requirement SAP ERP shipment with SAP TM freight order SAP TM Forwarding settlement documents with SAP ERP Billing document SAP TM freight order with SAP ERP purchase order Answer.
Which SAP TM documents are involved in a Shipper to logistics service provider (LSP) B2B scenario if both are using SAP TM? Note: There are 2 correct answers to this question.
LSP'S Service order LSP'S forwarding quotation Shipper's freight unit Shipper's freight order.
.A retailer plans transport routes and timings in SAP ERP and executes warehouse activities in SAP Extended warehouse management(SAP EWM).They want to use the SAP Event management (SAP EM)Tracking function to track the carrier's performance. Which ot the following integration scenarios with SAP TM should they use?
Create SAP TM freight orders from SAP ERP shipments Create SAP TM freight orders from SAP EWM transportation units Create SAP EWM transportation units from SAP TM freight orders Create SAP ERP shipments from SAP TM freight orders.
33. You are using shipment-based tendering. What information is transferred from SAP TM to SAP
ERP using the standard web service for transferring freight order information to SAP ERP?
Note: There are 2 correct answers to this question.
Tendering status Carrier Freight agreement number Shipment status .
You want to record the tollowing events in the treight unit and the associated freight order.
.planning the freight unit
.loading begin
.Arrival at destination
.proof of delivery
How many event handlers are created for this purpose? 1 2 4 8.
You want to make sure that a particular forwarding house is entered as the ordering in a freight order based on the ID of the consignee. What do you have to define in customizing for the freight order type?
Default change controller strategy Panner determination profile Determination based on first location Organizational unit determination condition.
Which of the following can you send from SAP TM to SAP EWM Extended warehouse
management for warehouse execution? Vehicle resource Freight order Freight unit Forwarding order.
A discrepancy is configured with tolerance and blocking. Which of the tollowing are set when a discrepancy outside the configured tolerance is reported for a treight order?
Note: There are 3 correct answers to this question.
An invoicing block for the freight unit An execution block tor the freight order A planning block for the freight order An execution block for the freight unit An invoicing block for the freight order.
A large logistics service provider transports 20 packages in a full container load (FCL) consignment using its own vessel. The consignment is for 20 freight units (one transportation unit in total).The main carrier is executed on a freight booking with nine other containers. The terminal in the port of destination only receives eight of the ten containers. Which event handlers’ types can you use to see if this FCL consignments was unloaded at the port of destinations?
Note: There are 2 correct answers to this question.
Freight order Freight unit Handling unit Transportation unit.
What can initiate the creation of a forwarding agreement quotation?
Note: There are 2 correct answers to this question.
Freight Agreement Freight Agreement RFQ CRM Opportunity Forwarding Agreement quotation Assignment.
You create a freight agreement request for quotation (RFQ) Master with seven RFQ items. From three items tor which the carrier A is not incumbent carrier A is removed. Four other carrier are assigned to this freight agreement request for quotation (RFQ) Master. You generate the invidual freight agreement RFQs. How many individual freight agreement RFQs are created for carrier A? 1 4 5 7.
In a strategic freight procurement process how can you influence that fuel surcharge do NOT
Exceed the base charges quoted by a carrier?
Define target shares Enable bonus-malus logic
Publish target rates
Define business shares
.
What is the cardinality between purchasing organizations and carriers in a freight agreement RFQ Mater? 1 Purchasing organization to 1 carrier
N Purchasing organization to 1 carrier 1 Purchasing organization to N carriers
N Purchasing organization to M carriers.
The following settings are defined for a freight order from location A to location B with two freight unit The distance between locations A and B in the transportation lane in 1500 km the durations is 19hrs and fix transportation during flag is set The average speed for the means of transport is defined as 100km/h and GIS quality flag is not set Loading and unloading at each freight unit at location A and B is defined as 1hours The vehicle resource is available from 8.00 am to 8.00pm Loading start on Monday at 8.30 am. When is unloading finished? Tuesday 5.30 pm
Tuesday 3.30 PM Tuesday 7.30 pm Tuesday 7.30 am .
You are planning to use package builder to estimate freight volume more accurately for better capacity planning on what criteria can you base the definition of the package type assignment? Note: There are 2 correct answers to this question. Transportation group
Shipping type Shipping location Business partner.
There is one order-based transportation requirement (OTR) with the following items (see attached table) the relevant frei ht unit building rule users. How many freight units will be created? 1 3 9 10.
Which of the following can you define for a means of transport? Note: There are 3 correct answers to this question. Capacity
GIS quality Low speed Factory calendar Transportation mode .
You have defined the transportation zone hierarchy shown in the attached screenshot. Which transportation lanes can you use for a transport that originates in transportation zone 4 and ends in
5-> 4
2-> 3 1-> 5 2-> 1 4-> 1.
What functionality is achieved by using a handover location from SAP ERP Document in SAP TM? Note: there are 2 correct answers to this question. To split freight unit stages in a delivery-based transportation requirement
To determine planning relevance of stages in a freight unit To split freight unit stages in an order-based transportation requirement To override incoterm location from SAP ERP document .
In which of the following areas can you use incompatibilities? Note: there are 3 correct answers to this question. Delivery proposal
Carrier selection Freight unit building Tendering Charge Calculation .
Based on your company policy, the product POISON should NOT be transported on means of transport TRUCK unless authorized by user A. How can you maintain the system reaction in the corresponding incompatibility definition used by user A?
Note: There are 2 correct answers to this question Automatic violation: incompatibility must not be violated.
Manual violation: incompatibility must not be violated.
Automatic violation: incompatibility must not be violated
Manual violation: incompatibility is ignored. Automatic violation: incompatibility must not be violated.
Manual violation: Warning if incompatibility is violated. Automatic violation: incompatibility is ignored.
Manual violation: warning if incompatibility is violated.
.
Which of the following actions can be triggered from the transportation cockpit? Note: there are 2 correct answers to this question. Create routings for a freight unit
Merge stages of a freight order
Send a freight order to SAP EWM Remove a resource from a freight order.
In which transaction can you define transportation durations? Create planning profile
Define location Assign transshipment location Create condition
.
Which object do you have to create in SAP ERP if you want to use handover locations? Warehou
Vendor Customer Route.
You want to differentiate transportation requirement types in a newly installed SAP TM System based on SAP ERP document types. What do you need to create to create in SAP TM?
Note: There are 2 correct answers to this question.
A condition based on /SCMTMS/DTR TYPE
A condition based on /SCMTMS/TOR TYPE A condition based on /SCMTMS/OTR TYPE A condition based on /SCMTMS/FUBR .
You perform sales order scheduling for a material with enough stock on hand. which dates on the sales order are updated by SAP TM?
Note: There are 2 correct answers to this question.
Delivery date
Transportation planning date Loading date Material availability date .
You transfer an SAP ERP sales order to SAP TM in the XML monitor of SAP TM you find the messa e shown in the screenshot. What does this entry mean?
The order-based transportation requirement was NOT created because the message is scheduled for processing but is NOT processed yet
The order-based transportation requirement was NOT created because the message was transferred to an external application but the message has error state on outbound side. The order-based transponation requirement was NOT created because the message encountered
an error The order-based transportation requirement was created SUCCESSFULLY
.
You have defined that freight units are NOT automatically bulit when the order-based transportation requirement (OTR) is created. Which of the following options can you use to create freight units for the OTR? The OTR work list
The transponation cockpit The OTR document The delivery proposal .
The source location at header level in an order-based transportation requirements is empty. What could be the reason for this?
The source document is an SAP ERP Sales order
The source document is an outbound delivery The source document is an SAP ERP purchase order The source location was NOT transferred via the core intertace.
What is used to transter stock transport orders from SAP ERP to SAP TM? Output Determination
Post processing framework Core interface Workflow.
What does SAP ERP do when a split request is received from SAP TM? Note: There are 3 correct answers to this question. SAP ERP creates a new outbound delivery document
SAP ERP Triggers a TRR0 Output from the original delivery document SAP ERP sends a POP TRANSPORTATIONREQUESTSUITEREQUEST OUT message to TM SAP ERP changes the original outbound delivery document SAP ERP informs SAP TM whether the delivery split was successful Answer
.
You have completed the configuration tasks for cost distribution and freight settlement in SAP TM and SAP ERP. The settlement documents were successfully transferred to SAP ERP. Which of the tollowing business documents in SAP ERP would you check to verity that the amounts and postings are correct? Note: There are 2 correct answers to this question. Service entry sheet
Agency billing document Freight invoice Shipment cost document.
You want to configure event based charges.to which document type can you assign an event
profile? Note: There are 2 correct answers to this question.
Freight settlement document
Forwarding order Freight booking Transportation unit.
You have created a forwarding settlement documents. What do you need to map to send this document from SAP TM to SAP ERP? Note: There are 2 correct answers to this question. SAP TM Charge types to SAP ERP Service master
SAP TM purchasing organization to SAP ERP Purchasing organization SAP TM sales organization to SAP ERP sales organization SAP TM charge types to SAP ERP condition type .
Which of the following can you determine using conditions in charge management?
Note: There are 2 correct answers to this question.
Rate table
Validity date of the rate table Carrier in the freight agreement Freight agreement.
To which of the following documents types can you assign change controller strategies? Note: There are 2 correct answers to this question. Forwarding order
Freight order Service order Order-based transportation requirement.
How can you create a schedule departure?
Note: There are 2 correct answers to this question.
Generate from a rule
Upload via report Copy from a freight booking Maintain in default route .
To which of the following can you assign instruction sets? Note: There are 2 correct answers to this question. Forwarding order type
Freight order type Stage type Movement type.
In a buyer’s consolidation scenario which of the following ratios of export forwarding orders to
import forwarding orders is valid?
1 export forwarding order to 1 import forwarding order
N export forwarding order to N import forwarding order .1 export forwarding order to N import forwarding order N export forwarding order to 1 import forwarding order .
You have defined the transportation zone hierarchy and means of transport hierarchy as shown in the screenshot below. Transportation lanes have been defined for all means of transport between all transportation zones. Four allocations have been defined.
Orientation: Within: From: 1; To: 1 ; Means of transportation B
Orientation: Within: From: 1; To: 1 ; Means of transportation A
Orientation: Along: From: 4; To: 2; Means of transportation B
Orientation: Along: From: 2; To: 3; Means of transportation A
1
2 3 4.
How does the continuous move tunction intluence the carrier selection process? It combines two freight orders with the same carrier in one freight order
It deducts a discount from the carrier selection planning costs for neighboring freight orders It moves the dates of the freight orders to avoid idle time It narrows down the available carriers to only carriers that allow continuous moves.
How can a user consider carrier reliability when selecting a carrier for a freight order?
Note: There are 2 correct answers to this question.
Use the business context viewer to evaluate carrier performance
Choose "cost + priority" in carrier selection settings Assign an event protile to the freight order type Define costs for earliness/lateness in planning cost settings
.
A carrier has responded to your request for quotation but was NOT automatically assigned to the freight order. What could be the reason for this? Note: There are 2 correct answers to this question. The tendering profile contains a subsequent step
The carrier responded after the response time had expired The tendering process was set to 'Direct Tendering-send freight order directly' The program to evaluate freight quotations was NOT executed.
What can you maintain in the business partner master data that represents a driver in SAP S/4HANA supply chain for transportation management?
Note: There are 2 correct answers to this question.
Planning profile
Non-working times and absences Validity period Fixed assignment to a vehicle resource .
You are implementing SAP S/4HANA supply chain for Transportation management. What can be
direct predecessor documents tor a freight order?
Note: There are 2 correct answers to this question.
Order-based Transportation requirement
Freight unit Shipment Sales order .
What SAP TM functionality is available with "Basic shipping" of SAP S/4HANA supply chain for transportation management?
Note: There are 3 correct answers to this question. Transportation planning based on outbound deliveries
Transportation planning based on inbound deliveries Transportation planning based on Sales orders Package building Transportation execution without event management .
Which communication methods can you use in SAP S/4HANA Supply chain for transportation management to interact with a carrier when tending freight orders?
Note: There are 3 correct answers to this question.
Web service
Collaboration ponal E-mail SMS IDoc .
What settings are controlled by the treight unit type? Note: There are 3 correct answers to this question. Tendering settings
Freight unit building rule Direct shipment options Change controller settings Organizational unit determination.
What can you define in the forwarding order type?
Note: There are 3 correct answers to this question. Output profile
lncoterm location stage building Freight unit building rule Stage determination Purchasing organization .
You have created an air forwarding order using shipping type 'ULD'. What is the correct item hierarchy for this forwarding order? Container-->service-->package
Container-->package-->package Container-->product-->package Package-->product-->service .
Which of the following can you use to determine a stage sequence in a forwarding order?
Note: There are 2 correct answers to this question.
Stage profile
Stage type Shipping type Movement type .
|
