Cuestiones
ayuda
option
Mi Daypo

TEST BORRADO, QUIZÁS LE INTERESETest ejemplo2

COMENTARIOS ESTADÍSTICAS RÉCORDS
REALIZAR TEST
Título del test:
Test ejemplo2

Descripción:
Test ejemplo

Autor:
Oscar Cl
(Otros tests del mismo autor)

Fecha de Creación:
20/03/2023

Categoría:
Personal

Número preguntas: 61
Comparte el test:
Facebook
Twitter
Whatsapp
Comparte el test:
Facebook
Twitter
Whatsapp
Últimos Comentarios
No hay ningún comentario sobre este test.
Temario:
Planning Operators and Application Jobs 1 of 80 Which SAP IBP planning operator can be run to delete planning objects in a certain version? Purge Non-Confirming Data Purge Key Figure Data Outside Planning Area Planning Horizon Purge Key Figure Data Purge Master Data.
Planning Operators and Application Jobs 8 of 80 What are some of the available ABC segmentation methods in SAP IBP? Note: There are 2 correct answers to this question. By Number of Items (Sorted Average) By Number of Items (Sorted Values) By Pareto Principle (Sorted and Calculated Values) By Pareto Principle (Sorted and Cumulated %).
Planning Operators and Application Jobs 9 of 80 You are implementing SAP IBP to plan for a supply chain that experiences high seasonality. What supply planning operators can be used in your model to plan stock pre-builds? Finite and infinite heuristics Finite heuristics only Supply optimizer and supply heuristics Supply optimizer only.
Planning Operators and Application Jobs 11 of 80 For which of the following application jobs can you enter planning filters as parameters? Note: There are 2 correct answers to this question. Purge Non-Conforming Data Purge Key Figure Data Create Time Periods for Time Profiles Purge Master Data.
Planning Operators and Application Jobs 44 of 80 What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note: There are 2 correct answers to this question. Copying multiple key figures can be processed sequentially. If necessary source key figures values are disaggregated. If necessary target key figures values are disaggregated. Copying multiple key figures on different planning levels is not possible.
Planning Operators and Application Jobs 56 of 80 Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)? Note: There are 3 correct answers to this question. Transportation lead times Maximum lot size Aggregated constraints Minimum lot size Adjusted transport receipts.
Planning Operators and Application Jobs 62 of 80 What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct answers to this question. Identify inventory items that require closer attention. Choose time independent key figures as segmentation measures. Substitute missing values in case of sporadic demands. Use forecasting algorithms that are specific to seasonal demands of SKUS in the segment "B".
Planning Operators and Application Jobs 66 of 80 What are the S&OP operator (optimizer) parameters associated with demand fair share? -Number of fair share segments -Additional tiering costs (default) -Number of fair share segments late delivery -Number of fair share segments -Additional tiering costs (default) -Inventory days of supply -Number of fair share segments -Maximum days of coverage -Number of fair share segments late delivery -Number of fair share segments -Additional tiering costs (default) -Maximum Inventory.
Planning Operators and Application Jobs 75 of 80 The S&OP Operator Profiles app is used to configure different types of algorithms. Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer? Note: There are 2 correct answers to this question. Time profile level Global cost factors Processing mode Discretization.
Planning Operators and Application Jobs 78 of 80 You need to create time periods for the time profile in a planning area. What should you be aware of when running the Create Time Periods application job? The assigned Planning Area must be active. This application job can be run for multiple time profiles at once. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area. A time profile has to be activated so that the application job can proceed.
Analytics and reporting 3 of 80 What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct answers to this question. Link two analytics charts. Rename the charts. Display all assigned analytics on a single UI. Add process templates. Use drill-down functionality.
Analytics and Reporting 35 of 80 For your project, you create a new planning area and consider how to create analytics and alerts for it. How can you create these objects? Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area. Merge analytics and alerts into a new planning area from any sample planning area.
Analytics and Reporting 53 of 80 Which sets of chart types are provided within the Analytics Advanced application? Note: There are 3 correct answers to this question. Seasonal Chart Types Comparison Chart Types Geographic Chart Types Trend Chart Types Simulation Chart Types.
Analytics and Reporting 60 of 80 Analytics charts are created by the user in the Advanced Analytics application. What can the user do in the Advanced Analytics app? Note: There are 2 correct answers to this question. Open graphics in Excel. Apply filters on your data. Group data. Merge charts together.
Demand Planning 20 of 80 Which of the following are valid use cases for using the Realignment App? Note: There are 2 correct answers to this question. Merging two locations into a new location Using the realignment run to identify obsolete data Changing customer sources and reassigning customers to new DCs Removing outliers from the sales history of a reference product before transferring its sales to a new product.
Demand Planning 28 of 80 Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm? Note: There are 2 correct answers to this question. Forecast Error CV Calculated by Manage Forecast Error Calculations app Recommended Safety Stocks from Multistage Inventory Optimization Sales Order Quantities (both historical and future open orders) Future Consensus Forecasts and Lagged Forecast Snapshots.
Demand Planning 32 of 80 Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct answers to this question. The attribute belongs to a simple or compound master data type. The Business Meaning of the attribute has been specified. The attribute should be a non-key attribute of the master data type. The attribute should be assigned to all planning levels.
Demand Planning 33 of 80 You are modeling a new product introduction. Which of the following steps can be part of your modeling process in the Manage Product Lifecycle app? Note: There are 2 correct answers to this question. Enter the product family to which the new product belongs Enter the Phase-out Start Date and Phase-out End Date Copy the launch dimension from the reference product to the new product Create planning objects for new combinations in the app.
Demand Planning 42 of 80 Which of the following are functions of SAP IBP for demand? Note: There are 2 correct answers to this question. Demand sensing of demand data using predictive analytics tools Consideration of demand-driven analysis for buffer positioning. Detailed statistical analysis of demand data using predictive analytics tools Embedded, on-the-fly demand analytics.
Demand Planning 48 of 80 Which pre-processing steps can be used to cleanse historical sales data before generating a statistical forecast in SAP IBP? Note: There are 2 correct answers to this question. Intermittency Detection and Correction in Sales History Substitute Missing with Mean or Median in Sales History Promotion Sales Lift Elimination.
Demand Planning 51 of 80 You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to the realignment steps settings? Note: There are 2 correct answers to this question. A realignment step can change master data, planning objects and key figures. You must mark the realignment step as "shared" and assign the steps to users. The name of the realignment step should be no longer than 20 characters. The number of steps in the realignment run is limited to 255.
General Configuration of a Planning Area 4 of 80 You are reviewing the master data types that are often used for supply and inventory planning. Which master data types are compound master data types? Note: There are 2 correct answers to this question. SOURCECUSTGROUP SOURCELOCATION SOURCEPRODUCTION SOURCECUSTOMER.
General Configuration of a Planning Area 14 of 80 A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets? O IF("PERIODID2" ="$$PERIODID2CU$$...) IF("PERIODID3"="$$PERIODID3CU$$...) IF("PERIODID4" ="$SPERIODID4CUSS...) OIF("PERIODID5"="$$PERIODID5CU$$...).
General Configuration of a Planning Area 18 of 80 Model configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object? This object provides a single value for a unique planning combination. This object contains user-defined criteria that monitor the running of business plans. This object is not exposed to the user in planning views or modeling. This type of key figure is not usually stored and it cannot be set to editable.
General Configuration of a Planning Area 21 of 80 What function would you use to configure a year-to-date calculation? Dynamic Rolling Aggregation Cumulative Aggregation Rolling Aggregation Last Period Aggregation.
General Configuration of a Planning Area 23 of 80 What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned? Created as type DECIMAL and assigned to a compound master data type Created as type INTEGER and assigned to a compound master data type Created as type NVARCHAR and assigned to an external master data type Created as type INTEGER and assigned to a simple master data type.
General Configuration of a Planning Area 38 of 80 What are some of the properties of filter blocks? Note: There are 3 correct answers to this question. Filter blocks can be visualized in the Key Figure Calculations app. Filter blocks are imposed when modeling an attribute as a key figure. Filter blocks are imposed when modeling cross-period calculations. Filter blocks are imposed when modeling attribute transformations. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel.
General Configuration of a Planning Area 50 of 80 Which type of Master Data will be represented by the Master Data Type LOCATIONFR? External Master Data Type Compound Master Data Type Virtual Master Data Type Reference Master Data Type.
General Configuration of a Planning Area 59 of 80 What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct answers to this question. Configure at most two input key figures on the same planning level in a key figure calculation. Specify a planning horizon in the planning area for each level of the assigned time profile. Assign the compound master data type and its component master data types. Configure at least one calculated key figure for the planning area.
Inventory 12 of 80 What are the outputs of the Calculate Target Inventory Components Operator? Note: There are 3 correct answers to this question. Component Usage Reorder Point Recommended Safety Stock Target Pipeline Stock Target Cycle Stock.
Iventory 36 of 80 Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run? Note: There are 2 correct answers to this question. Target Service Level Holding Cost Percentage Minimum Lot Size Transportation Lead Time Error CV.
Inventory 79 of 80 Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app? Note: There are 2 correct answers to this question. Adjust for forecast bias in Forecast Error CV calculations Adjust Safety Stock Recommendations based on forecast error CV input Propagate forecast error to upstream locations in a supply chain network Identifiy intermittent demand for Forecast Error CV calculations.
Key Figures & Attributes 27 of 80 You are configuring disaggregation for the KF1 key figure in the Planning Areas Model Configuration app. Which methods can you use? Note: There are 3 correct answers to this question. Disaggregation in batch triggered by an application job Disaggregation according to a helper key figure Proportional disaggregation by using KF2 in the expression Disaggregation according to a user-defined expression Disaggregation according to an equal split.
Key Figures & Attributes 43 of 80 You created a key figure and want to add calculations. Which of the following rules do you consider? Note: There are 2 correct answers to this question. Key figures can be calculated across different planning levels. All key figure calculations have calculation inputs, which can be marked as stored or calculated. The calculation chain for a key figure must always result in a calculated key figure. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
Key Figures & Attributes 25 of 80 You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process? Note: There are 2 correct answers to this question. Splitting the values from aggregated to detailed level, based on the time profile attribute Splitting the values from aggregated to detailed level using multiplication by the proportions Splitting the values from aggregated to detailed level, based on a stored split-factor key figure Splitting the values from detailed to aggregated level by using a copy operator.
Model Sales and Operations Processes 58 of 80 Which of the following are features of the S&OP process templates? Note: There are 2 correct answers to this question. New instances of templates allow for re-use of the same processes. All process templates are assigned to dashboards. Each step depicted in the template can have tasks associated with it. The S&OP process step can be started with an application job.
Model Supply Processes 37 of 80 Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct answers to this question. Not-fully satisfied demands Not adhering to maximum transport values Violation of minimum resource utilization Not respecting production capacity Violation of minimum aggregated inventory values.
Model Supply Processes 72 of 80 You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)? Incremental production values Capacity expansion with additional costs Adjusted production interactive values Production source validity at the start of seasonal peak.
Solution Architecture and Data Integration 5 of 80 Which applications are present in the sample model SAPIBP1? Note: There are 3 correct answers to this question. Demand Sensing Sales and Operations Planning Inventory Optimization Supply and Allocation Planning Response Planning.
Solution Architecture and Data Integration 41 of 80 You are starting a new implementation project for SAP IBP and are considering the possible system architecture. What are the possible approaches for setting up the system landscape? Note: There are 2 correct answers to this question. Set up a three-tier landscape using transport, starting from the development system to test and production. Create additional planning areas in the test system to support training needs. Create additional test planning areas in the production system to support cutover needs. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
Solution Architecture and Data Integration 45 of 80 You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error? Download the Initial Problem Report in the Data Integration app. Navigate to the Master Data Workbook in Excel and open the Log. Download the Rejection Report in the Data Integration app. Navigate to the Manage Master Data app and open the Log.
Solution Architecture and Data Integration 49 of 80 You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP. What are the integration tools that you can use with such a setup for data transfer? Note: There are 2 correct answers to this question. Cloud Integration for Data Services Smart Data Integration Real-time Integration Cloud Identity Authentication Service.
Solution Architecture and Data Integration 67 of 80 SAP IBP ensures interoperability with which applications? Note: There are 2 correct answers to this question. User management in SAP Success Factors Business Network in SAP Ariba Financial Planning in SAP Analytics Cloud Salesforce Sales Cloud.
User Interface 10 of 80 You are developing the functionality and appearance of the Excel UI for SAP IBP business users. Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding? Note: There are 2 correct answers to this question. Changing the entries from the Name Manager Changing the layout of the master data workbooks SAP IBP ribbon extension Changing the member names.
User Interface 17 of 80 You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: There are 3 correct answers to this question. These filters are always applied based on the values stored in the database. You can add (or delete) planning objects to a planning view after these filters are applied. The alerts dashboard is not available if a value-based filter is set for the open planning view. These filters can be used together with attribute totals in the same planning view. You can only apply one value-based filter per planning view.
User Interface 26 of 80 You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct answers to this question. Complex calculation graphs for key figures Number of analytics charts displaying key figures' values Excessive SAP IBP formatting in the Microsoft Excel UI Number of local members and complexity of calculations.
User Interface 29 of 80 You have to be logged on to two separate SAP IBP tenants. What can help you differentiate the appearance of their user interfaces? Note: There are 2 correct answers to this question. Add the system name and tenant information from the About section to the Home page. Setting a separate theme for the Home page in the Web UI. Defining a different default planning area via the User Preferences. Having a different set of tiles in the Home group of apps. .
User Interface 30 of 80 You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct answers to this question. Planning view templates in the SAP IBP add-in for Microsoft Excel Snapshot operator in the SAP IBP add-in for Microsoft Excel Supply chain graph in Supply Chain Network app Jobs in the Applications Jobs app.
User Interface 65 of 80 Why would you set up a cascading filter in the planning view? Note: There are 2 correct answers to this question. To filter attributes based on specific values To filter using attributes that have a large number of values To filter data in an Application Job template To filter attributes based on other attribute filters.
User Interface 69 of 80 Which of these conditions must be met to create a Local Member key figure? Note: There are 2 correct answers to this question. Use Excel Cell References in the Report Editor option is selected. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel. Activate Local Member Recognition setting is selected. Users should have authorization for template administration.
User Interface 74 of 80 Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct answers to this question. The total value can be added before or after the selected attribute. The total number of attributes that can use subtotals in the planning view can be restricted. Only attribute-based totals can be added to the planning view. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
User Interface 77 of 80 How many different time levels can be selected within one planning view? Only base time levels of the planning area All time levels available in the time profile All time levels available in the time profile, restricted by global configuration parameter Only time levels from the base planning level of selected key figures.
User Interface 77 of 80 How many different time levels can be selected within one planning view? Only base time levels of the planning area All time levels available in the time profile All time levels available in the time profile, restricted by global configuration parameter Only time levels from the base planning level of selected key figures.
Model Supply Processes 76 of 80 You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed? Note: There are 2 correct answers to this question. Push and Pull production models are used by the optimizer. Prioritization of demand elements one by one is achieved by unconstrained heuristics. Finite heuristics can achieve demand prioritization and pegging. Planning results can be generated faster by the optimizer.
Key Figures & Attributes 19 of 80 Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3 correct answers to this question. Modified date Reason code Scenario ID Key figure type Attributes.
Key Figures & Attributes 22 of 80 You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combination How can you resolve this problem? Note: There are 2 correct answers to this question. Use the Check Mode operator to create the combinations Use the Data Integration app to load suitable data that creates the combinations Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel Use the Manage Master Data app to create the combinations.
Key Figures & Attributes 64 of 80 You define fixing for a key figure. Which of the following functions are available for this key figure? Note: There are 2 correct answers to this question. Fixing is possible for manually editable key figures. Fixing is possible for a certain period, including all child values in the hierarchy. Fixing is possible for system editable key figures. Fixing is possible for a certain quantity of a key figure value.
Key Figures & Attributes 68 of 80 What are the relevant use cases for helper key figures? Note: There are 2 correct answers to this questions. Used when you have more than three inputs at different planning levels in one calculation Used by end-users in planning views to help visualize cross-period calculations Used at any level of calculation level except the Request Level Used to break down a large calculation into manageable subcalculations.
Demand Planning 70 of 80 Where can the results of a Time Series Analysis be used? Note: There are 2 correct answers to this question. In the Manage Forecast Error Calculations app - Demand Planning app to calculate the Forecast Error CV During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app In the Microsoft Excel add-in, where you can use them to limit and filter your planning views In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs.
General Configuration of a Planning Area 55 of 80 Which of the following are examples of time-independent key figures? Note: There are 2 correct answers to this question. A currency conversion key figure, such as exchange rate A forecast metric key figure, such FCSTMAPE A special key figure marked as an aggregate key figure (aggregate constraint) A unit of measure key figure, such as UOMCONVERSIONFACTOR.
Key Figures & Attributes 24 of 80 You want to display and edit data in different Units of Measure (UOM). Which of the following must you consider before you use the UOM? Note: There are 3 correct answers to this question. Units of measure are usually not time-independent. Unit of measure is an attribute of a master data type, such as Product. Analytics provide the user with the option to select the target unit of measure. Units of measure are usually not time-dependent. Conversion to the target unit of measure is handled by SAP IBP Excel UI.
Denunciar test Consentimiento Condiciones de uso