ENCORE 350-401

Refer to the exhibit. After running the code in the exhibit. Which step reduces the amount of data that NETCONF server returns to the NETCONF client, to only the interface’s configuration?. Create an XML filter as a string and pass it to get_config() method as an argument. Use the txml library to parse the data returned by the NETCONF server for the interface’s configuration. Create a JSON filter as a string and pass it to the get_config() method as an argument. Use the JSON library to parse the data returned by the NETCONF server for the interface’s configuration.

A network engineer configures BGP between R1 and R2. Both routers use BGP peer group CORP and are set up to use MD5 authentication. This message is logged to the console of router R1: *Jun 5 33:34:33.033: %TCP-6-BADAUTH: Invalid MD5 digest from 10.10.10.1 (29832) to 10.120.10.1 (179) tableid -0 Which two configurations allow a peering session to form between R1 and R2? (Choose two). R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(Config-router)#neighbor PEER password Cisco. R1(config-router)#neighbor 10.10.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco. R1(config-router)#neighbor 10.120.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco. R2(config-router)#neighbor 10.120.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco.

Which device makes the decision for a wireless client to roam?. wireless client. access point. wireless LAN controller. WCS location server.

Refer to the exhibit. External users require HTTP connectivity to an internal company web server that is listening on TCP port 8080. Which command set accomplishes this requirement?. interface G0/0 ip address 209.165.200.225 255.255.255.224 ip nat inside. interface G0/0 ip address 209.165.200.225 255.256.255.224 ip nat inside interface G0/1 ip address 10.1.1.1 255.255.255.0 ip nat outside ip nat inside source static tcp 209.165.200.225 80 10.1.1.100 8080. interface G0/0 ip address 209.165.200.225 255.255.255.224 ip nat inside interface G0/1 ip address 10.1.1.1 255.255.255.0 ip nat outside ip nat inside source static tcp 10.1.1.1 8080 209.166.200.225 80. interface G0/0 ip address 209.165.200.225 255.255.255.224 ip nat outside interface G0/1 ip address 10.1.1.1 255.255.255.0 ip nat inside ip nat inside source static tcp 10.1.1.100 8080 interface G0/0 80. interface G0/0 ip address 209.165.200.225 255.255.255.224 ip nat outside interface G0/1 ip address 10.1.1.1 255.255.255.0 ip nat inside ip nat inside source static tcp 209.165.200.225 8080 10.1.1.100 8080.

Which three elements determine Air Time efficiency? (Choose three). evert-driven RRM. data rate (modulation density) or QAM. channel bandwidth. number of spatial streams and spatial reuse. RF group leader. dynamic channel assignment.

Which features does Cisco EDR use to provide threat detection and response protection?. containment, threat intelligence, and machine learning. firewalling and intrusion prevention. container-based agents. cloud analysis and endpoint firewall controls.

Refer to the exhibit. def get_credentials(): creds={'username':'cisco','password':'c339348dc30e3fbig3kjr93godke333'} return(creds.get('username')) print(get_credentials()) What is the output of this code?. username: Cisco. get_credentials. username. cisco.

Which two threats does AMP4E have the ability to block? (Choose two). DDoS. ransomware. SQL injection. Microsoft Word macro attack. email phishing.

Refer to the exhibit. Which single security feature is recommended to provide Network Access Control in the enterprise?. 802.1X. MAB. WebAuth. port security sticky MAC.

Refer to the exhibit. %OSPF-5-ADJCHG: Process 1, Nbr 10.0.0.2 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached %OSPF-6-AREACHG: 10.0.0.1/32 changed from area 0 to area 1 %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 10.0.0.2, FastEthernet0/0 What is the cause of the log messages?. OSPF area change. hello packet mismatch. MTU mismatch. IP address mismatch.

What are two benefits of virtual switching when compared to hardware switching? (Choose two). increased MTU size. hardware independence. VM-level isolation. increased flexibility. extended 802.1Q VLAN range.

What are two characteristics of VXLAN? (Choose two). It uses VTEPs to encapsulate and decapsulate frames. It has a 12-bit network identifier. It extends Layer 2 and Layer 3 overlay networks over a Layer 2 underlay. It lacks support for host mobility. It allows for up to 16 million VXLAN segments.

Refer to the exhibit. Router# traceroute 10.10.10.1 Type escape sequence to abort. Tracing the route to 10.10.10.1 1 10.0.0.1 5 msec 5 msec 5 msec 2 10.5.0.1 15 msec 17 msec 17 msec 3 10.10.10.1 * * * An engineer is troubleshooting a connectivity issue and executes a traceoute. What does the result confirm?. The destination server reported it is too busy. The probe timed out. The destination port is unreachable. The protocol is unreachable.

Refer to the exhibit. A network engineer configures a new GRE tunnel and enters the show run command. What does the output verify?. The tunnel keepalive is configured incorrectly because they must match on both sites. The tunnel destination will be known via the tunnel interface. The tunnel will be established and work as expected. The default MTU of the tunnel interface is 1500 byte.

Refer to the exhibit. An engineer has configured Cisco ISE to assign VLANs to clients based on their method of authentication, but this is not working as expected. Which action will resolve this issue?. require a DHCP address assignment. utilize RADIUS profiling. set a NAC state. enable AAA override.

What is the function of a VTEP in VXLAN?. provide the routing underlay and overlay for VXLAN headers. dynamically discover the location of end hosts in a VXLAN fabric. encapsulate and de-encapsulate traffic into and out of the VXLAN fabric. statically point to end host locations of the VXLAN fabric.

If the noise floor is -90 dBm and the wireless client is receiving a signal of -75 dBm, what is the SNR?. -165. 83. 15. 1.2.

Drag and drop the snippets onto the blanks within the code to construct a script that advertises the network prefix 192.168.5.0 session. Not all options are used. 1-A; 2-C;3-B. Nop.