Cuestiones
ayuda
option
Mi Daypo

TEST BORRADO, QUIZÁS LE INTERESEindicacion

COMENTARIOS ESTADÍSTICAS RÉCORDS
REALIZAR TEST
Título del test:
indicacion

Descripción:
indiicacion

Autor:
0000000
(Otros tests del mismo autor)

Fecha de Creación:
19/06/2018

Categoría:
Otros

Número preguntas: 20
Comparte el test:
Facebook
Twitter
Whatsapp
Comparte el test:
Facebook
Twitter
Whatsapp
Últimos Comentarios
No hay ningún comentario sobre este test.
Temario:
Which of the following components are not in the common computing resource (CCR) cabinets? a. General processor modules (GPM) b. ARINC 664 network cabinet switches (ACS) c. Remote data concentrators (RDC) d. Fiber optic translator (FOX) modules .
In which CCS components are the hosted software applications for airplane systems stored? a. General processor modules (GPM) b. ARINC 664 network cabinet switches (ACS) c. Remote data concentrators (RDC) d. Fiber optic translator (FOX) modules.
What is the purpose of the fiber optic translator (FOX) modules? a. Changes A664 signals to electrical A429 b. Changes light signals to electrical and vice versa c. Changes A429 signals to electrical A664 and vice versa .
ARINC 664 network cabinet (ACS) switches: (Select the incorrect response.) a. Have 2 channels. b. Have fiber optic ARINC 664 connections. c. Have electrical ARINC 664 connections. .
The ARINC 664 network remote switches (ARS): (Select the incorrect response.) a. Connect to the remote data concentrators (RDC). b. Connect to the fiber optic translator (FOX) modules . c. Have ARINC 429 connections. d. Filter, monitor, and forward data.
The Remote data concentrators (RDC) have: (Select the incorrect response.) a. Fiber optic connections. b. ARINC 429 connections. c. Analog and analog discrete connections. d. Controller area network (CAN) bus connections. .
Which components are parts of the common data network (CDN)? (Select the incorrect response.) a. ARINC 664 network cabinet (ACS) switches b. General processor modules (GPM) c. ARINC 664 network remote (ARS) switches d. Fiber optic translator (FOX) modules .
When does the common core system (CCS) power-up in the inhibited mode? a. In the air. Either fuel control switch in RUN. No Fuel Cutoff switch data is available. b. In the ground. Either fuel control switch in RUN. No Fuel Cutoff switch data is available. c. In the air. Either fuel control switch in CUTOFF. No Fuel Cutoff switch data is available. .
You apply power to the airplane on battery power only. How long does it take for the displays to show? a. About 50 seconds b. About 100seconds c. About 150 seconds.
In flight, all displays go blank. The flight crew pushes the L CCR reset switch. What happens? a. The power conditioning modules in the CCR cabinet remove the power to the cabinet modules in the left CCR cabinet b. The power conditioning modules in the CCR cabinet remove and reapply power to the cabinet modules in the left CCR cabinet c. The power conditioning modules in the CCR cabinet reapply power to the cabinet modules in the left CCR cabinet a. The power conditioning modules in the CCR cabinet remove the power to the cabinet modules in the left CCR cabinet b. The power conditioning modules in the CCR cabinet remove and reapply power to the cabinet modules in the left CCR cabinet c. The power conditioning modules in the CCR cabinet reapply power to the cabinet modules in the left CCR cabinet .
Some components have a direct connection with the CDN (they do not go through RDCs). Where can you see the status of these connections? a. On the DCAS maintenance pages b. On the ATA 31 maintenance pages c. On the CCS maintenance pages.
To make alert indications, the caution and warning system uses: (Select the incorrect response.) a. EICAS messages. b. comm/warning speakers. c. Master warning/caution lights. d. Fail flags.
What 2 signals must the stick shaker motors receive before they operate? a. 28v dc from an RPDU and ground signal from an RDC b. 28v dc from an RPDU and ground signal from CRN c. 28v dc from an RPDU and ground signal from an CCS .
During a warning condition, you push a master warning light. What happens? (Select the incorrect response.) a. The related EICAS warning level message goes away. b. The master warning light goes off. c. The aural alert may stop.
Which are the major components of the primary display system (PDS)? (Select the incorrect response.) a. Graphics generators (GG) b. Head-down displays (HDD) c. General processor modules (GPM) d. Head-up displays (HUD) .
What components format display data and make the images for the displays? a. Graphics generators b. GPM c. RDC.
Which switches change the primary flight display (PFD) to narrow format and move it to the inboard head-down display (HDD)? a. ND/EFIS switches b. ND/PFD switches c. PFD/MFD switches.
What device do you use to move the cursor to the onside electronic flight bag (EFB)? a. CCD b. EFB c. MFD.
What 2 devices can you use to control the cursor on the multifunction displays? a. EFB and CURSOR CONTROL switch on the MFD b. CCD and CURSOR CONTROL switch on the MFK c. CCD and CURSOR CONTROL switch on the EFIS/DSP.
To transfer the EICAS display from the captain inboard DU to the first officer inboard DU: a. Push the EICAS button on the EFIS/DSP. b. Push the MFD R switch.
Denunciar test Consentimiento Condiciones de uso