Which function does the range of private IPv4 addresses perform? ensures that NAT is not required to reach the internet with private range addressing enables secure communications to the internet for all external hosts provides a direct connection for hosts from outside of the enterprise network allows multiple companies to each use the same addresses without conflicts. An engineer must configure a /30 subnet between two routers. Which usable IP address and subnet mask combination meets this criteria? interface e0/0
description to HQ-A371:10975
ip address 172.16.1.4 255.255.255.248 interface e0/0
description to HQ-A371:10975
ip address 10.2.1.3 255.255.255.252 interface e0/0
description to HQ-A371:10975
ip address 209.165.201.2 255.255.255.252 interface e0/0
description to HQ-A371:10975
ip address 192.168.1.1 255.255.255.248. An office has 8 floors with approximately 30-40 users per floor. What command must be configured on the router Switched Virtual Interface to use address space efficiently? ip address 192.168.0.0 255.255.0.0 ip address 192.168.0.0 255.255.254.0 ip address 192.168.0.0 255.255.255.224 ip address 192.168.0.0 255.255.255.128. Refer to exhibit. Which statement explains the configuration error message that is received?
*****
Router(config)#interface GigabitEthernet 1/0/1
Router(config-if)#ip address 192.168.16.143 255.255.255.240
Bad mask /28 for address 192.168.16.143 It is a network IP address It is a broadcast IP address It belongs to a private IP address range The router does not support /28 mask. A corporate office uses four floors in a building
* Floor 1 has 24 users
* Floor 2 has 29 users
* Floor 3 has 28 users
* Floor 4 has 22 users
Which subnet summarizes and gives the most efficient distribution of IP addresses for the router configuration? 192.168.0.0/24 as summary and 192.168.0.0/28 for each floor 192.168.0.0/25 as summary and 192.168.0.0/27 for each floor 192.168.0.0/26 as summary and 192.168.0.0/29 for each floor 192.168.0.0/23 as summary and 192.168.0.0/25 for each floor. 192.168.0.0/23 as summary and 192.168.0.0/25 for each floor 10.10.225.32 255.255.255.240 10.10.225.32 255.255.255.224 10.10.225.48 255.255.255.240 10.10.225.48 255.255.255.224. Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design? The router will not accept the addressing scheme The router interfaces must be encapsulated with the 802.1Q protocol. The connection between switches should be a trunk. The design will function as intended Spanning-tree will need to be used. Which network allows devices to communicate without the need to access the Internet? 172.9.0.0/16 192.0.0.0/8 209.165.201.0/24 172.28.0.0/16. Which goal is achieved by the implementation of private IPv4 addressing on a network? provides a reduction in size of the forwarding table on network routers allows communication across the Internet to other private networks provides an added level of protection against Internet exposure allows servers and workstations to communicate across public network boundaries.