Which two statements about a FortiAnalyzer Fabric are true? (Choose two.)
The supervisor can access the logs in the fabric members using an API. All fabric members must run in collector mode except the supervisor. Fabric members and the supervisor support HA. Fabric members must be in the same time zone as the supervisor.
Refer to the exhibit.
What does the data point at 21:20 indicate? FortiAnalyzer is indexing logs faster than logs are being received. The fortilogd daemon is ahead in indexing by one log. FortiAnalyzer has temporarily stopped receiving logs so older logs can be indexed. FortiAnalyzer is dropping logs to catch up.
Refer to the exhibit.
the Compromised Host section with the numbe
The exhibit shows a partial view of the Compromised Host section in FortiView with the number of threats blurred out.
Assuming that they are all included in the image, what is the number of threats? 11 16 1 03.
Which statement describes a dataset in FortiAnalyzer?
They are used to set the data included in templates. They determine what data is retrieved from the database. They provide the layout used for reports. They define the chart types to be used in reports.
Which statement about the FortiSOAR management extension is correct? It requires a dedicated FortiSOAR device or VM. It runs as a docker container on FortiAnalyzer. It requires a FortiManager configured to manage FortiGate. It does not include a limited trial by default.
Which statement is correct regarding the event displayed?
An incident was created from this event. The security event risk is considered open. The risk source is isolated. The security risk was blocked or dropped.
Why run the command diagnose sql status sqlplugind? To list the current SQL processes running To view the current hcache size To display the SQL query connections and hcache status To check what is the database log insertion status.
Which statement describes archive logs on FortiAnalyzer? Logs compressed and saved in files with the .gz extension Logs that are indexed and stored in the SQL database Logs a FortiAnalyzer administrator can access in FortiView Logs previously collected from devices that are offline.
After generating a report, you notice the information you were expecting to see is not included in it.
What are two possible reasons for this scenario? (Choose two.) You enabled auto-cache with extended log filtering. The logfiled service has not indexed all the expected logs. The logs were overwritten by the data retention policy. The time frame selected in the report is wrong.
Which log will generate an event with the status Unhandled? An AV log with action-quarantine. A WebFilter log with action=dropped. An AppControl log with action=blocked. An IPS log with action=pass.
What must you consider when using log fetching? (Choose two.) You can use filters to include only logs from a single device. The fetch client can retrieve logs from devices that are not added to its local Device Manager. The fetching profile must include a user with the Super_User profile. The archive logs retrieved from the server become archive logs in the client.
Refer to the exhibit.
Which FortiAnalyzer tool can refer to the Cyber Kill Chain stages and allows you to identify which Fortinet products can protect you against new vulnerabilities?
FortiView Monitor top threats Outbreak detection services FortiSOC dashboards Threat hunting SIEM table.
Which item must you configure on FortiAnalyzer to email generated reports automatically? Report scheduling SFTP server SNMP server Output profile.
What are two benefits of using fabric connectors? (Choose two.) Fabric connectors allow you to improve redundancy. They allow FortiAnalyzer to send logs in real-time to public cloud accounts. You do not need an additional license to send logs to the cloud platform. Using fabric connectors is more efficient than using third-party polling with API.
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.) When running in collector mode, FortiAnalyzer can forward logs to a syslog server. You can create and edit reports when FortiAnalyzer is running in collector mode. FortiAnalyzer runs in collector mode by default unless it is configured for HA. A topology with FortiAnalyzer devices running in both modes can improve their performance.
Which log will generate an event with the status Contained? An IPS log with action-pass. A WebFilter log with action=dropped. An AV log with action-quarantine. An AppControl log with action-blocked.
What are two effects of enabling auto-cache in a FortiAnalyzer report? (Choose two.) When new logs are received, the hard-cache data is updated automatically. The generation time for reports is decreased. FortiAnalyzer local cache is used to store generated reports. The size of newly generated reports is optimized to conserve disk space.
Which statement about the FortiSIEM management extension is correct? Its use of the available disk space is capped at 50% It can be installed as a dedicated VM. It requires a licensed FortiSIEM supervisor. Allows you to manage the entire life cycle of a threat or breach.
Refer to the exhibit.
What does the data point at 12:20 indicate? The performance of FortiAnalyzer is below the baseline. FortiAnalyzer is using its cache to avoid dropping logs. The sqlplugind service is caught up with new logs. The log insert lag time is increasing.
A playbook contains five tasks in total. An administrator runs the playbook and four out of five tasks finish successfully, but one task fails. What will be the status of the playbook after it is run? Upstream failed Success Running Failed.
Which statement about sending notifications with incident updates is true? Each incident can send notifications to a single external platform. Each connector used can have different notification settings. Notifications can be sent only when an incident is created or deleted. You must configure an output profile to send notifications by email.
What is the purpose of using prefilters when configuring event handlers? They are common filters applied simultaneously to all event handlers. They can filter the logs before they are processed by FortiAnalyzer. They limit which logs are checked for matches by the other filters. They download new filters to be used in event handlers.
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address? The detection engine classifies those logs as Suspicious. FortiAnalyzer flags the associated host for further analysis. A new Infected entry is added for the corresponding endpoint. The endpoint is marked as Compromised and, optionally, can be put in quarantine.
Which statement is correct regarding the event displayed? An incident was created from this event. The security risk was blocked or dropped. The risk source is isolated. The security event risk is considered open.
How can you attach a report to an incident? Saving it in JSON format, and then importing it By attaching it to an event handler alert By editing the settings of the desired report From the properties of an existing incident.
What does the disk status Degraded mean for RAID management? One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the operating system. The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard drive to an optimal stat The hard drive is no longer being used by the RAID controller. The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array fault tolerant.
Refer to the exhibit.
Which statement is correct regarding the event displayed An incident was created from this event. The risk source is isolated. The security event risk is considered open. The security risk was blocked or dropped.
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.) Send Alert through Fabric Connectors Send SNMP trap Send SMS notification Send Alert through IM .
What is the purpose of using prefilters when configuring event handlers? They can filter the logs before they are processed by FortiAnalyzer. They can limit which logs are checked for matches by the other filters. They download new filters to be used in event handlers. They are common filters applied simultaneously to all event handlers.
Refer to the exhibit.
The image displays the configuration of a FortiAnalyzer the administrator wants to join to an existing HA cluster.
What can you conclude from the configuration displayed? This FortiAnalyzer is configured to receive logs in its port1. This FortiAnalyzer will trigger a failover after losing communication with its peers for 10 seconds. This FortiAnalyzer will join to the existing HA cluster as the primary. After joining to the cluster, this FortiAnalyzer will keep an updated log database.
Why do you need to wait for several minutes before you run a playbook that you just created? FortiAnalyzer needs that time to parse the new playbook. FortiAnalyzer needs that time to debug the new playbook. FortiAnalyzer needs that time to ensure there are no other playbooks running. FortiAnalyzer needs that time to back up the current playbooks.
Refer to the exhibit.
Which statement is correct regarding the event displayed? The security event risk is considered open. An incident was created from this event. The security risk was blocked or dropped.
The risk source is isolated.
You are looking for a playbook that was exported by a junior administrator. You perform a search and find the files listed below
Which file would you choose to perform an import operation? Exported_playbook.sql Exported_playbook.csv Exported_playbook.txt Exported_playbook.json.
Refer to the exhibit.
Based on the partial outputs displayed above, which devices are ready to be configured as peers in an HA cluster? FortiAnalyzer1 and FortiAnalyzer3 FortiAnalyzer2 and FortiAnalyzer3 FortiAnalyzer1 and FortiAnalyzer2 These devices cannot participate in the same cluster.
What is the purpose of trigger variables?
mation from the trigger to filter the action in a task
To use information from the trigger to filter the action in a task To store the starting times for On_Schedule triggers To provide the trigger information to make the playbook start running To display statistics about the playbook runtime.
Which statement correctly describes the management extensions available on FortiAnalyzer? Management extensions may require a minimum number of CPU cores to run. Management extensions do not require additional licenses. Management extensions require a dedicated VM for best performance.
Management extensions allow FortiAnalyzer to act as a FortiSIEM supervisor.
What are offline logs on FortiAnalyzer? When you restart FortiAnalyzer, all stored logs are considered to be offline logs Logs that are collected from offline devices after they boot up Logs that are indexed and stored in the SQL database Compressed logs, also known as archive logs, are considered to be offline logs.
Which FortiAnalyzer feature allows you to use a proactive approach when managing your network security? Threat hunting Incidents dashboards FortiView Monitor Outbreak alert services.
Refer to the exhibit.
Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text fiber that matches all login attempts to the web interface generated by any uses other than "ader and coming from Laptop1.
Which filter will achieve the desired result?
operation~login & dstip==10.1.1.210 & user!~admin operation~login & performed_on=="GUI(10.1.1.210)" & user!=admin operation~login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin O operation~login & performed_on=="GUI(10.1.1.100)" & user!=admin.
Which two statements are true regarding high availability (HA) on FortiAnalyzer? (Choose two.)
FortiAnalyzer HA can function without VRRP, and VRRP is required only if you have more than two FortiAnalyzer devices in a cluster. FortiAnalyzer HA implementation is supported by all cloud providers. FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings. All devices in a FortiAnalyzer HA cluster must run in the same operation mode: analyzer or collector.
After you have moved a registered logging device out of one ADOM and into a new ADOM, what is the purpose of running the following CLI command?
execute sql-local rebuild-adom <new-Adom-name>
To populate the new ADOM with analytical logs for the moved device, so you can run reports To migrate the archive logs to the new ADOM To remove the analytics logs of the device from the old database To reset the disk quota enforcement to default.
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID? Run execute format disk to format and restart the FortiAnalyzer device. Hot swap the disk. There is no need to do anything because the disk will self-recover. Shut down FortiAnalyzer and replace the disk.
Which statement is true regarding Macros on FortiAnalyzer? Macros are ADOM specific and each ADOM has unique macros relevant to that ADOM. Macros are supported only on the FortiGate ADOM. Macros are useful in generating excel log files automatically based on the report settings. Macros are predefined templates for reports and cannot be customized.
A rogue administrator was accessing FortiAnalyzer without permission, and you are tasked to see what activity was performed by that rogue administrator on Fortianalyzer
What can you do on FortiAnalyzer to accomplish this?
Click Task Monitor and view the tasks performed by that administrator.
Click Log View and generate a report for that administrator.
Click Fabric View and view the tasks performed by the rogue administrator.
Click FortiView and generate a report for that administrator.
Refer to the exhibit.
Which statement is correct regarding the event displayed? The security event risk is considered open. An incident was created from this event.
The security risk was blocked or dropped.
The risk source is isolated.
What is required to authorize a FortiGate on FortiAnalyzer using Fabric authorization? A FortiGate ADOM Valid FortiAnalyzer credentials
The FortiGate serial number
A pre-shared key.
Which two actions should an administrator take to view Compromised Hosts on FortiAnalyzer? (Choose two.) Enable device detection on an interface on the FortiGate devices that are connected to the FortiAnalyzer device.
Make sure all endpoints are reachable by FortiAnalyzer.
Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to FortiAnalyzer.
Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date.
When working with FortiAnalyzer reports, what is the purpose of a dataset?
To provide the layout used for reports
To set the data included in templates
To retrieve data from the database
To define the chart type to be used.
A playbook contains five tasks in total. An administrator executed the playbook and four out of five tasks finished successfully, but one task failed.
What will be the status of the playbook after its execution? Failed Running Success Upstream_failed.
Which two statements are true regarding enabling auto-cache on FortiAnalyzer? (Choose two.) This feature is automatically enabled for scheduled reports. Report size will be optimized to conserve disk space on FortiAnalyzer.
Enabling auto-cache reduces report generation time for reports that require a long time to assemble datasets.
Reports will be cached in the memory.
If the primary FortiAnalyzer in an HA cluster fails, how is the new primary elected? The active port number is checked first. The firmware version is checked first. The configured priority is checked first. The configured IP address is checked first.
For which two purposes would you use the command set log checksum? (Choose two.) To encrypt log communications To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP server To send an identical set of logs to a second logging server
To prevent log modification or tampering
.
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results.
Similarly, which feature can you use for FortiView?
Export to PDF Export to Custom Chart Export to Report Chart Export to Chart Builder.
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)
When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format
By deploying different FortiAnalyzer devices in both modes, you can improve their overall performance. When in collector mode, FortiAnalyzer supports event management and reporting features.
O Collector mode is the default operating mode.
Which statement is true about sending notifications with incident updates? If you use multiple fabric connectors, all connectors must have the same notification settings.
Notifications can be sent only by email.
You can send notifications to multiple external platforms.
Notifications can be sent only when an incident is updated or deleted.
Which two statements are true regarding log fetching on FortiAnalyzer? (Choose two.)
Log fetching allows the administrator to run queries and reports against historical data by retrieving archived logs from one FortiAnalyzer device and sending them to another FortiAnalyzer
A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with the same FortiAnalyzer devices at the other end. Log fetching allows the administrator to fetch analytics logs from another FortiAnalyzer for redundancy.
Log fetching can be done only on two FortiAnalyzer devices that are running the same firmware version.
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.) Principal Service provider Identity collector Identity provider.
An administrator, fortinet, is able to view logs and perform device management tasks, such as adding and removing registered devices. However, administrator is not able to create a mail server that can be used i send alert emails.
What can be the problem? ADOM mode is configured with Advanced mode.
A trusted host is configured.
fortinet is assigned the standard User administrative profile.
fortinet is assigned the Restricted_User administrative profile.
Which two statements are correct regarding the export and import of playbooks? (Choose two.) Playbooks can be exported and imported only within the same FortiAnalyzer. A playbook that was disabled when it was exported, will be disabled when it is imported. You can import a playbook even if there is another one with the same name in the destination. You can export only one playbook at a time.
Which SQL query is in the correct order to query the database in the FortiAnalyzer? SELECT devid FROM $log GROUP BY devid WHERE 'user'='USER1'
SELECT devid FROM $log WHERE `user'='USER1' GROUP BY devid
FROM $log WHERE 'user'='USER1' SELECT devid GROUP BY devid SELECT devid WHERE 'user'='USER1' FROM $log GROUP BY devid.
What is the purpose of output variables? To save all the task settings when a playbook is exported
To display details of the connectors used by a playbook
To store playbook execution statistics
To use the output of the previous task as the input of the current task.
Which statement is true when you are upgrading the firmware on an HA cluster made up of two FortiAnalyzer devices? First, upgrade the secondary device, and then upgrade the primary device. Both FortiAnalyzer devices will be upgraded at the same time.
You can perform the firmware upgrade using only a console connection.
You can enable uninterruptible-upgrade so that the normal FortiAnalyzer operations are interrupted while the cluster firmware upgrades.
Which two statements are true regarding FortiAnalyzer log forwarding? (Choose two.) Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.
Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.
In aggregation mode, you can forward logs to syslog and CEF servers as well.
Both modes, forwarding and aggregation, support encryption of logs between devices.
Which two statements are true regarding ADOM modes? (Choose two.) Normal mode is the default ADOM mode. In normal mode, the disk quota of the ADOM is fixed and cannot be modified, but in advanced mode, the disk quota of the ADOM is flexible.
In an advanced mode ADOM, you can assign FortiGate VDOMS from a single FortiGate device to multiple FortiAnalyzer ADOMs.
You can change ADOM modes only through the CLI.
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.) Database snapshot Report information
System information
Logs from registered devices.
Which daemon is responsible for enforcing the log file size? logfiled sqlplugind miglogd oftpd.
Refer to the exhibits.
How many events will be added to the incident created after running this playbook? No events will be added. Thirteen events will be added. Five events will be added. Ten events will be added.
You created a playbook on FortiAnalyzer that uses a FortiOS connector.
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stitch are available in the FortiOS connector? Fabric Connector event FortiAnalyzer Event Handler FortiOS Event Log Incoming webhook.
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
To build a dataset and chart automatically, based on the filtered search results
To add charts directly to generated reports
To build a chart under FortiView
To build a chart automatically based on the top 100 log entries.
What is required to authorize a FortiGate on FortiAnalyzer using Fabric authorization"
A FortiGate ADOM A pre-shared key
Valid FortiAnalyzer credentials
The FortiGate serial number.
An administrator has configured the following settings:
config system global
set log-checksum md5-auth
end
What is the significance of executing these commands? These commands record the MD5 hash value and authentication code of log files. These commands create the secure channel used by the OFTP process. These commands verify the integrity of the log files received.
These commands encrypt log transfer between FortiAnalyzer and other devices.
Which two parameters impact the amount of reserved disk space required by FortiAnalyzer? (Choose two). Disk size License type Total quota
RAID level.
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)
By deploying different FortiAnalyzer devices in both modes, you can improve their overall performance.
When in collector mode, FortiAnalyzer supports event management and reporting features.
Collector mode is the default operating mode.
When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.
Which two items must you configure on FortiAnalyzer to email a FortiAnalyzer report externally? (Choose two.)
Output profile
SFTP server
Mail server
Report scheduling
.
Which statement is true about sending notifications with incident updates?
You can send notifications to multiple external platforms.
If you use multiple fabric connectors, all connectors must have the same notification settings.
Notifications can be sent only when an incident is updated or deleted.
Notifications can be sent only by email.
Which statement is true when you are upgrading the firmware on an HA cluster made up of two FortiAnalyzer devices?
You can perform the firmware upgrade using only a console connection.
You can enable uninterruptible-upgrade so that the normal FortiAnalyzer operations are not interrupted while the cluster firmware upgrades.
Both FortiAnalyzer devices will be upgraded at the same time.
First, upgrade the secondary device, and then upgrade the primary device.
What is the purpose of predefined report templates on FortiAnalyzer? They can be customized to meet your needs.
They can be created by saving reports as templates.
The data used in reports charts. They include the data used in reports charts.
Which two statements are true regarding fabric connectors? (Choose two.)
Fabric connectors allow you to save storage costs and improve redundancy.
Configuring fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API.
The storage connector service does not require a separate license to send logs to the cloud platform.
Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3, Azure Blob, and Google Cloud.
Which two methods can be used to restrict administrative access on FortiAnalyzer? (Choose two) Use administrator profiles. Limit access to specific virtual domains. Configure trusted hosts. Add custom Security Fabric connectors.
Refer to the exhibit.
The exhibit shows "remoteservergroup" is an authentication server group with LDAP and RADIUS servers.
Which two statements express the significance of enabling Match all users on remote server when configuring a new administrator? (Choose two.) User remoteadmin from LDAP and RADIUS servers will be able to log in to FortiAnalyzer at any time. Administrators can log in to FortiAnalyzer using their credentials on remote LDAP and RADIUS servers. It creates a wildcard administrator using LDAP and RADIUS servers. It allows administrators to use two-factor authentication.
Refer to the exhibit.
The exhibit shows "remoteservergroup" is an authentication server group with LDAP and RADIUS servers.
Which two statements express the significance of enabling Match all users on remote server when configuring a new administrator? (Choose two.) User remoteadmin from LDAP and RADIUS servers will be able to log in to FortiAnalyzer at any time. Administrators can log in to FortiAnalyzer using their credentials on remote LDAP and RADIUS servers. It creates a wildcard administrator using LDAP and RADIUS servers. It allows administrators to use two-factor authentication.
For which two purposes would you use the command set log checksum? (Choose two.) To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP server To encrypt log communications To send an identical set of logs to a second logging server To prevent log modification or tampering.
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.) Logs will be present in both ADOMS immediately after the move. Analytics logs will be moved to ADOM1 from the root ADOM automatically. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database Archived logs will be moved to ADOM1 from the root ADOM automatically.
Which SQL query is in the correct order to query the database in the FortiAnalyzer?
SELECT devid WHERE `user'='USER1' FROM $log GROUP BY devid FROM $log WHERE `user'='USER1' SELECT devid GROUP BY devid
SELECT devid FROM $log WHERE 'user'='USER1' GROUP BY devid
SELECT devid FROM $log GROUP BY devid WHERE 'user'='USER1'.
Which two statements are true regarding ADOM modes? (Choose two.) In an advanced mode ADOM, you can assign FortiGate VDOMS from a single FortiGate device to multiple FortiAnalyzer ADOMs. You can change ADOM modes only through the CLI. Normal mode is the default ADOM mode. In normal mode, the disk quota of the ADOM is fixed and cannot be modified, but in advanced mode, the disk quota of the ADOM is flexible.
Which statement is true about using aggregation mode on FortiAnalyzer? Aggregation mode supports log filters. In aggregation mode, logs and content files are forwarded in real time. Aggregation mode can be configured only on the CLI. Aggregation mode can work with syslog servers.
What does the disk status Degraded mean for RAID management? One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the operating system. The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard drive to an optimal state. The hard drive is no longer being used by the RAID controller. The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array fault tolerant.
What can you do on FortiAnalyzer to restrict administrative access from specific locations?
Configure an ADOM for a respective location. Configure two-factor authentication with a remote RADIUS server. Configure trusted hosts for that administrator. Enable geo-location services on accessible interfaces.
Which two statements are true regarding the outbreak alert service? (Choose two.) Outbreak alerts are available on the root ADOM only. An additional license is required. lt automatically downloads new event handlers and reports. New alerts are received by email.
Refer to the exhibit.
What does the data point at 10:15:42 indicate? FortiAnalyzer has temporarily stopped receiving logs so older logs can be indexed. The fortilogd daemon is ahead in indexing by one log. FortiAnalyzer is indexing logs faster than logs are being received. FortiAnalyzer is dropping logs.
What are two advantages of grouping similar reports? (Choose two.) Improves report completion time Conserves disk space on FortiAnalyzer by grouping multiple similar reports Provides a better summary of reports Reduces the number of hcache tables and improves auto-hcache completion time .
What are analytics logs on FortiAnalyzer?
Log type Traffic logs Logs that are indexed and stored in the SQL Logs that are compressed and saved to a log file Logs that roll over when the log file reaches a specific size.
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group? (Choose two) A trusted host profile that restricts access to the LDAP group A remote LDAP server An administrator group A local wildcard administrator account.
An administrator has configured the following settings:
config system fortiview settings set resolve-ip enable
end
What is the significance of executing this command? It resolves the destination IP address to a hostname in FortiView on FortiAnalyzer. Use this command only if the source IP addresses are not resolved on FortiGate. You must configure local DNS servers on FortiGate for this command to resolve IP addresses on FortiAnalyzer lt resolves the source and destination IP addresses to a hostname in FortiView on FortiAnalyzer.
What statement is correct regarding the FortiSOAR management extension?
lt includes a limited trial by default.
lt runs as a VM.
lt requires a FortiManager configured to manage FortiGate. lt requires a dedicated FortiSOAR appliance or VM.
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report
externally? (Choose two.) Mail server Output profile SFTP server .Report scheduling.
Why is the total quota less than the total system storage? Some space is reserved for system use 3.6% of the system storage is already being used The logfiled process is just estimating the total quota The oftpd process has not archived the logs yet.
For which two purposes would you use the command set log checksum? (Choose two.) To help protect against man-in-the-middle attacks during log log upload from
FortiAnalyzer to an SFTP server To prevent log modification or tampering To encrypt log communications To send an identical set of logs to a second logging server.
Refer to the exhibit.
What does the data point at 14:55 tell you? The received rate is almost at its maximum for this device The sqlplugind daemon is behind in log indexing by two logs Logs are being dropped Raw logs are reaching FortiAnalyzer faster than they can be indexed.
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks
on FortiAnalyzer has failed.
What is the recommended method to replace the disk? Shut down FortiAnalyzer and then replace the disk Downgrade your RAID level, replace the disk, and then upgrade your RAID level Clear all RAID alarms and replace the disk while FortiAnalyzer is still running Perform a hot swap.
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing? FortiAnalyzer is ensuring that the parity data of a redundant drive is valid FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant FortiAnalyzer is functioning normally.
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are
not resolving to a hostname. How can you resolve the source and destination IP addresses,
without introducing any additional performance impact to FortiAnalyzer? Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve Configure # set resolve-ip enable in the system FortiView settings Configure local DNS servers on FortiAnalyzer Resolve IP addresses on FortiGate.
You have recently grouped multiple FortiGate devices into a single ADOM. System Settings >
Storage Info shows the quota used. What does the disk quota refer to? The maximum disk utilization for each device in the ADOM The maximum disk utilization for the FortiAnalyzer model The maximum disk utilization for the ADOM type The maximum disk utilization for all devices in the ADOM.
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into
FortiAnalyzer? To properly correlate logs To use real-time forwarding To resolve host names To improve DNS response times.
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time
FortiAnalyzer is temporarily unavailable? FortiAnalyzer uses log fetching to retrieve the logs when back online FortiGate uses the miglogd process to cache the logs The logfiled process stores logs in offline mode Logs are dropped.
After you have moved a registered logging device out of one ADOM and into a new ADOM,
what is the purpose of running the following CLI command? execute sql-local rebuild-adom
<new-ADOM-name> To reset the disk quota enforcement to default To remove the analytics logs of the device from the old database To migrate the archive logs to the new ADOM To populate the new ADOM with analytical logs for the moved device, so you can run
reports.
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring
the FortiAnalyzer back to functioning normally, without losing data? Hot swap the disk Replace the disk and rebuild the RAID manually Take no action if the RAID level supports a failed disk Shut down FortiAnalyzer and replace the disk.
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific
timeframe, from another FortiAnalyzer device? Log fetching Indicators of compromise Log forwarding in aggregation mode Log upload.
If you upgrade the FortiAnalyzer firmware, which report element can be affected? Custom datasets Report scheduling Report settings Output profiles.
FortiAnalyzer reports are dropping analytical data from 15 days ago, even though the data
policy setting for analytics logs is 60 days.
What is the most likely problem? Quota enforcement is acting on analytical data before a report is complete Logs are rolling before the report is run CPU resources are too high Disk utilization for archive logs is set for 15 days.
Which log type does the FortiAnalyzer indicators of compromise feature use to identify infected
hosts? Antivirus logs Web filter logs IPS logs Application control logs.
Which two purposes does the auto-cache setting on reports serve? (Choose two.) It automatically updates the hcache when new logs arrive It reduces report generation time It provides diagnostics on report generation time It reduces the log insert lag rate.
In order for FortiAnalyzer to collect logs from a FortiGate device, which two configurations are
required? (Choose two.) FortiGate must be registered with FortiAnalyzer Remote logging must be enabled on FortiGate ADOMs must be enabled Log encryption must be enabled.
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to
authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.) A local wildcard administrator account A remote LDAP server A trusted host profile that restricts access to the LDAP group An administrator group.
When you perform a system backup, what does the backup configuration contain? (Choose two.) Generated reports Device list Authorized devices logs System information.
Which clause is considered mandatory in SELECT statements used by the FortiAnalyzer to generate reports? FROM LIMIT WHERE ORDER BY.
What is the purpose of a dataset query in FortiAnalyzer? It sorts log data into tables It extracts the database schema It retrieves log data from the database It injects log data into the database.
Logs are being deleted from one of the ADOMs earlier than the configured setting for archiving in the data policy.
What is the most likely problem? CPU resources are too high Logs in that ADOM are being forwarded, in real-time, to another FortiAnalyzer device The total disk space is insufficient and you need to add other disk The ADOM disk quota is set too low, based on log rates.
Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.) License type Disk size Total quota RAID level.
What happens when a log file saved on FortiAnalyzer disks reaches the size specified in the device log settings? The log file is overwritten The log file is stored as a raw log and is available for analytic support The log file rolls over is archived The log file is purged from the database.
Which two statements about log forwarding are true? (Choose two.) Forwarded logs cannot be filtered to match specific criteria. Logs are forwarded in real-time only. The client retains a local copy of the logs after forwarding. You can use aggregation mode only with another FortiAnalyzer.
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.) SMS Email SNMP IM.
You have moved a registered logging device out of one ADOM and into a new ADOM.
What happens when you rebuild the new ADOM database? FortiAnalyzer migrates analytics logs to the new ADOM. FortiAnalyzer removes analytics logs from the old ADOM. FortiAnalyzer resets the disk quota of the new ADOM to default. FortiAnalyzer migrates archive logs to the new ADOM.
Consider the CLI command:
# configure system global
set log-checksum md.5
end
What is the purpose of the command? To add a unique tag to each log to prove that it came from this FortiAnalyzer To add the MD5 hash value and authentication code To add a log file checksum To encrypt log communications.
How are logs forwarded when FortiAnalyzer is configured to use aggregation mode? Logs are forwarded as they are received. Logs are forwarded as they are received and content files are uploaded at a scheduled time. Logs and content files are stored and uploaded at a scheduled time. Logs and content files are forwarded as they are received.
Refer to the exhibit.
What does the data point at 14:35 tell you?
FortiAnalyzer is indexing logs faster than logs are being received. FortiAnalyzer has temporarily stopped receiving logs so older logs can be indexed. FortiAnalyzer is dropping logs The sqlplugind daemon is ahead in indexing by one log.
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered
devices? Log correlation Host name resolution Log collection Real-time forwarding.
FortiAnalyzer uses the Optimized Fabric Transfer Protocol (OFTP) over SSL for which purpose? To send an identical set of logs to a second logging server To encrypt log communication between devices To upload logs to an SFTP server To prevent log modification during backup.
|
