Peluqueria 1-54

Refer to the exhibit. Which two statements are true about the routing entries in this database table? (Choose two.). A. All of the entries in the routing database table are installed in the FortiGate routing table. B. The port2 interface is marked as inactive. C. Both default routes have different administrative distances. D. The default route on port2 is marked as the standby route.

Which three pieces of information does FortiGate use to identify the hostname of the SSL server when SSL certificate inspection is enabled? (Choose three.). A. The host field in the HTTP header. B. The server name indication (SNI) extension in the client hello message. C. The subject alternative name (SAN) field in the server certificate. D. The subject field in the server certificate. E. The serial number in the server certificate.

Refer to the exhibit. Which algorithm does SD-WAN use to distribute traffic that does not match any of the SD-WAN rules?. A. All traffic from a source IP to a destination IP is sent to the same interface. B. Traffic is sent to the link with the lowest latency. C. Traffic is distributed based on the number of sessions through each interface. D. All traffic from a source IP is sent to the same interface.

A network administrator is configuring an IPsec VPN tunnel for a sales employee travelling abroad. Which IPsec Wizard template must the administrator apply?. A. Remote Access. B. Site to Site. C. Dial up User. D. Hub-and-Spoke.

Refer to the exhibits, which show the system performance output and the default configuration of high memory usage thresholds in a FortiGate. Based on the system performance output, what can be the two possible outcomes? (Choose two.). A. FortiGate Will start sending all files to FortiSandbox for inspection. B. FortiGate has entered conserve mode. C. Administrators cannot Change the configuration. D. Administrators can access FortiGate only through the console port.

Refer to the exhibits. The exhibits show a diagram of a FortiGate device connected to the network, as well as the firewall policy and IP pool configuration on the FortiGate device.Two PCs, PC1 and PC2, are connected behind FortiGate and can access the internet successfully. However, when the administrator adds a third PC to the network (PC3),the PC cannot connect to the internet. Based on the information shown in the exhibit, which two configuration options can the administrator use to fix the connectivity issue for PC3? (Choose two.). A. In the firewall policy configuration, add 10.0.1.3 as an address object in the source field. B. In the IP pool configuration, set endip to 192.2.0.12. C. Configure another firewall policy that matches only the address of PC3 as source, and then place the policy on top of the list. D. In the IP pool configuration, set type to overload.

Which method allows managernent access to the FortiGate CLI network connectivity?. A. CLI console widget. B. Serial console. C. Telnet console. D. SSH console.

Refer to the exhibit. In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output shownin the exhibit. What should the administrator do next, to troubleshoot the problem?. A. Execute a debug flow. B. Capture the traffic using an external sniffer connected to portl. C. Execute another sniffer on FortiGate, this time with the filter 'host 10.0.1.10". D. Run a sniffer on the web server.

Refer to the exhibit. The exhibit shows the FortiGuard Category Based Filter section of a corporate web filter profile. An administrator must block access to download-com, which belongs to the Freeware and Software Downloads category. The administrator must also allow Other websites in the same category. What are two solutions for satisfying the requirement? (Choose two.). A. Configure a separate firewall policy with action Deny and an FQDN address object for *.download.com as destination address. B. Set the Freeware and Software Downloads category Action to Warning. C. Configure a web override rating for download.com and select Malicious Websites as the subcategory. D. Configure a static URL filter entry for download.com with Type and Action set to Wildcard and Block, respectively.

A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes. All trafic must be routed through the primary tunnel when both tunnels are up. The secondary tunnel must be used only if the primary tunnel goes down- In addition,FortiGate should be able to detect a dead tunnel to speed up tunnel failover. Which two key configuration changes must the administrator make on FortiGate to meet the requirements? (Choose two.). A. Enable Dead Peer Detection. B. Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels. C. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static route for the secondary tunnel. D. Configure a higher distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel.

Refer to the exhibit. The exhibits show the application sensor configuration and the Excessive-Bandwidth and Apple filter details, Based on the configuration, what Will happen to Apple FaceTime if there are only a few calls originating or incoming?. A. Apple FaceTime Will be allowed, based on the Video/Audio category configuration. B. Apple FaceTime Will be allowed, based on the Apple filter configuration. C. Apple FaceTime Will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow. D. Apple FaceTime Will be blocked, based on the Excessive-Bandwidth filter configuration.

An employee needs to connect to the office through a high-latency internet connection. Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?. A. SSL VPN idle-timeout. B. SSL VPN login-timeout. C. SSL VPN dtls-hello-timeout. D. SSL VPN session-ttl.

When FortiGate performs SSL/SSH full inspection, you can decide how it should react when it detects an invalid certificate. Which three actions are valid actions that FortiGate can perform when it detects an invalid certificate? (Choose three.). A. Allow & Warning. B. Trust & Allow. C. Allow. D. Block & Warning. E. Block.

Refer to the exhibit, which shows the IPS sensor configuration. If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.). A. The sensor Will gather a packet log for all matched traffic. B. The sensor Will reset all connections that match these signatures. C. The sensor Will allow attackers matching the Microsoft.Windows.iSCSl.Target.DoS signature. D. The sensor Will block all attacks aimed at Windows servers.

Which statement is a characteristic of automation stitches?. A. They can be run only on devices in the Security Fabric. B. They can be created only on downstream devices in the fabric. C. They can have one or more triggers. D. They can run multiple actions at the same time.

What is the primary FortiGate election process when the HA override setting is disabled?. A. Connected monitored ports > Priority > System uptime > FortiGate serial number. B. Connected monitored ports > System uptime > Priority > FortiGate serial number. C. Connected monitored ports > Priority > HA uptime > FortiGate serial number. D. Connected monitored ports > HA uptime > Priority > FortiGate serial number.

Which two settings are required for SSL VPN to function between two FortiGate devices? (Choose two.). A. The client FortiGate requires the SSL VPN tunnel interface type to connect SSL VPN. B. The server FortiGate requires a CA certificate to verify the client FortiGate certificate. C. The client FortiGate requires a client certificate signed by the CA on the server FortiGate. D. The client FortiGate requires a manually added route to remote subnets.

Refer to the exhibit. Which statement about this firewall policy list is true?. A. The Implicit group can include more than one deny firewall policy. B. The firewall policies are listed by ID sequence View. C. The firewall policies are listed by ingress and egress interfaces pairing view. D. LAN to WAN, WAN to LAN, and Implicit are sequence grouping View lists.

Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI. Based on the exhibit, which statement is true?. A. The underlay zone contains portl and port2. B. The d-wan zone contains no member. C. The d-wan zone cannot be deleted. D. The virtualMan-link zone contains no member.

Which two statements describe how the RPF check is used? (Choose two.). A. The RPF check is run on the first sent packet of any new session. B. The RPF check is run on the first reply packet of any new session. C. The RPF check is run on the first sent and reply packet of any new session. D. The RPF check is a mechanism that protects FortiGate and the network from IP spoofing attacks.

Which three strategies are valid SD-WAN rule strategies for member selection? (Choose three.). B. Lowest Cost (SLA) Wilh load balancing. C. Best Quality with load balancing. D. Lowest Quality (SLA) with load balancing. E. Lowest Cost (SLA) without load balancing. A. Manual with load balancing.

Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.). A. Pre-shared key and certificate signature as authentication methods. B. Extended authentication (XAuth) to request the remote peer to provide a username and password. C. Extended authentication (XAuth) for faster authentication because fewer packets are exchanged. D. No certificate is required on the remote peer when you set the certificate signature as the authentication method.

Which two statements are true regarding FortiGate HA configuration synchronization? (Choose two.). A. Checksums of devices are compared against each Other to ensure configurations are the same. B. Incremental configuration synchronization can occur only from changes made on the primary FortiGate device. C. Incremental configuration synchronization can occur from changes made on any FortiGate device within the HA cluster. D. Checksums of devices Will be different from each Other because some configuration items are not synced to Other HA members.

What are two features of the NGFW profile-based mode? (Choose two.). A. NGFW profile-based mode can only be applied globally and not on individual VDOMs. B. NGFW profile-based mode must require the use of central source NAT policy. C. NGFW profile-based mode policies support both flow inspection and proxy inspection. D. NGFW profile-based mode supports applying applications and web filtering profiles in a firewall policy.

Refer to the exhibit to view the firewall policy. Why would the firewall policy not block a well-known virus, for example eicar?. A. The action on the firewall policy is not set to deny. B. The firewall policy is not configured in proxy-based inspection mode. C. Web filter is not enabled on the firewall policy to complement the antivirus profile. D. The firewall policy does not apply deep content inspection.

Which inspection mode does FortiGate use for application profiles if it is configured as a profile-based next-generation firewall (NGFW)?. A. Full content inspection. B. Proxy-based inspection. C. Certificate inspection. D. Flow-based inspection.

Refer to the exhibit showing a FortiGuard connection debug output. Based on the output, which two facts does the administrator know about the FortiGuard connection? (Choose two.). A. One server was contacted to retrieve the contract information. B. There is at least one server that Iost packets consecutively. C. A local FortiManager is one of the servers FortiGate communicates with. D. FortiGate is using default FortiGuard communication settings.

Refer to the exhibit. Why did FortiGate drop the packet?. A. It matched an explicitly configured firewall policy with the action DENY. B. It failed the RPF check. C. The nexthop IP address is unreachable. D. It matched the default implicit firewall policy.

An administrator must enable a DHCP server on one of the directly connected networks on FortiGate. However, the administrator is unable to complete the process on the GUI en able service the interface. In this scenario, what prevents the administrator from enabling DHCP service?. A. The role of the interface prevents setting a DHCP server. B. The DHCP server setting is available only on the CLI. C. Another interface is configured as the only DHCP server on FortiGate. D. The FortiGate model does not support the DHCP server.

Refer to the exhibit. Review the intrusion prevention system (IPS) profile signature settings shown in the exhibit. What do you conclude when adding the FTP.Login.Failed signature to the IPS sensor profile?. A. Traffc matching the signature Will be allowed and logged. B. The signature setting uses a custom rating threshold. C. The signature setting includes a group of Other signatures. D. Trafic matching the signature Will be silently dropped and logged.

The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile. Which order must FortiGate use when the web filter profile has features such as safe search enabled?. A. FortiGuard category filter and rating filter. B. Static domain filter, SSL inspection filter, and external connectors filters. C. DNS-based web filter and proxy-based web filter. D. Static URL filter, FortiGuard category filter, and advanced filters.

FortiGate is integrated with FortiAnalyzer and FortiManager. When a firewall policy is created, which attribute is added to the policy to improve functionality and to support recording logs to fortiAnalyzer or FortiManager?. A. Log ID. B. Policy ID. C. Sequence ID. D. Universally Unique Identifier.

An administrator configured a FortiGate to act as a collector for agentless polling mode. What must the administrator add to the FortiGate device to retrieve AD user group information?. A. RADIOS server. B. DHCP server. C. Windows server. D. LDAP server.

An administrator manages a FortiGate model that supports NTurbo. How does NTurbo enhance performance for flow-based inspection?. A. NTurbo offloads traffic to the content processor. B. NTurbo creates two inspection sessions on the FortiGate device. C. NTurbo buffers the whole file and then sends it to the antivirus engine. D. NTurbo creates a special data path to redirect traffic between the IPS engine its ingress and egress interfaces.

Refet to the exhibit.FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles. Which action must the administrator perform to consolidate the two policies into one?. A. Enable Multiple Interface Policies to select port1 and port2 in the same firewall policy. B. Create an Interface Group that includes port1 and port2 to create a single firewall policy. C. Select port1 and port2 subnets in a single firewall policy. D. Replace port1 and port2 with the any interface in a single firewall policy.

Refer to the exhibit, which shows a partial configuration from the remote authentication server. Why does the FortiGate administrator need this configuration?. A. To authenticate only the Training user group. B. To set up a RADIUS server Secret. C. To authenticate and match the Training OU on the RADIUS server. D. To authenticate Any FortiGate user qroups.

The exhibits show a diagram of a FortiGate device connected to the network, as well as the IP pool configuration and firewall policy objects. The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port3) interface has the IPaddress 10.0.1254/24. Which IP address Will be used to source NAT (SNAT) the traffc, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?. A. 10.200.1.1. B. 10.200.1.149. c. 10.200.1.99. D. 10.200.1.49.

A network advnnistrator is troubestootjng IPSEC tunnel between two FOftiGate devices. The administratw has determined that phase 1 failed to come up. The administrator has aso re-entered Ihe pre-shared key on both FortiGate deyes to make sure they match. Basad on the phase 1 cmfguratm ard the diagram shown in the exhibit which two configuration changas can the administrator make to bring phaspe 1 up? (Choose two). A. On HQ-FortiGate, disable Diffie-Helman group 2. B. On Romote-FortiGate, set port2 as Interface. C. On both FortiGate deuces, set Dead cetecton to on Demand. D. On HQ-Fortigate, set IKE mode tc Main (ID protection).

A network administrator has configured an SSL/SSH inspection profile defined for full SSL inspection and set with a private CA certificate. The firewall policy that allows the traffc uses this profile for SSL inspection and performs web filtering. When visiting any HTTPS websites, the browser reports certificate warning errors. What is the reason for the certificate warning errors?. A. The SSL cipher compliance option is not enabled on the SSL inspection profile. This setting is required when the SSL inspection profile is defined with a private CA certificate. B. The certificate used by FortiGate for SSL inspection does not contain the required certificate extensions. C. The browser does not recognize the certificate in use as signed by a trusted CA. D. With full SSL inspection it is not possible to avoid certificate warning errors at the browser level.

FortiGate is configured for firewall authentication. When attempting to access an external website, the user is not presented with a login prompt. What is the most likely reason for this situation?. A. The Service DNS is required in the firewall policy. B. The user is using an incorrect user name. C. The Remote-users group is not added to the Destination. D. No matching user account exists for this user.

Which three methods are used by the collector agent for AD polling? (Choose three.). A. WinSecLog. B. WMI. C. NetAPl. D. FSSO REST API. E. FortiGate polling.

Which two statements about equal-cost multi-path (ECMP) configuration on FortiGate are true? (Choose two.). A. If SD-WAN is enabled, you control the load balancing algorithm with the parameter load-balance-mode. B. If SD-WAN is disabled, you can configure the parameter v4-ecmp-mode to volume-based. C. If SD-WAN is enabled, you can configure routes with unequal distance and priority values to be part of ECMP. D. If SD-WAN is disabled, you configure the load balancing algorithm in config system settings.

What are two features of collector agent advanced mode? (Choose two.). A In advanced mode, FortiGate can be configured as an LDAP client and group filters can be configured on FortiGate. B. Advanced mode supports nested or inherited groups. C. In advanced mode, security profiles can be applied only to user groups, not individual users. D. Advanced mode uses the Windows convention —NetBios: Domain\username.

An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings. What is true about the DNS connection to a FortiGuard server?. A. It uses UDP 8888. B. It uses DNS over HTTPS. C. It uses DNS over TLS. D. It uses UDP 53.

Refer to the exhibits, which show the firewall policy and an antivirus profile configuration. Why is the user unable to receive a block replacement message when downloading an infected file for the first time?. A. The intrusion prevention security profile must be enabled when using flow-based inspection mode. B. The option to send files to FortiSamdbox for inspection is enabled. C. The firewall policy performs a full content inqkction on the file. D. Flow-based is used, which resets the last packet to the user.

Refer to the exhibits.FGT-1 and FGM are updated with HA configuratim commands shown in the exhibit. What would be the expected outcome in the HA cluster?. A. FGT-1 Will remain the primary because FGT-2 has Iower priority. B. FGT-2 Will take over as the primary because it has the override enable setting and higher priority than FGT-1. C. FGT-1 Will synchronize the override disable setting with FGT-2. D. The HA cluster Will become out of sync because the override setting must match on all HA members.

Refer to the exhibits. The exhibits show a diagram of a FortiGate device connected to the network, and the firewall configuration. An administrator created a Deny plicy with default settings to deny Webserver access for Rermte-User2. The policy should work such that Remote-User1 must be able to access the Webserver while preventing Remote-User2 from accessing the Webserver. Which two configuration Changes can the administrator make to the policy to deny Webserver access for Remote-User2? (Choose two.). A. Enable match-vip in the Deny policy. B- Set the Destination address as Webserver in the policy. C. Disable match-vip in the Deny policy. D. Set the Destination address as Deny_lP in the Allow_access policy.

Which two statements explain antivirus scanning modes? (Choose two.). A. In flow-based inspection mode, FortiGate buffers the file, but also simultanecausly transmits it to the client. B- In flow-based inspection mode files bigger than the buffer size are scanned. C. In proxy-based inspection mode files bigger than the buffer size are scanned. D. In proxy-based inspection mode antivirus scanning buffers the whole file for scanning, before sending it to the client.

Refer to the exhibits, which show the firewall policy and the security profile for Facebook. Users are given access to the Facebmk web application. They can play video content hosted on Facebook but they are unable to leave reactions on videos or Other types of posts. Which part Of the configuration must you Change to resolve the issue?. A Make the SSL inspection a deep content inspection. B. Add to the URL category in the security policy. C. Disable HTTP redirect to HTTPS on the web browser. D. the additional application signatures required to add to the security policy.

Which engine handles application control traffc on the next-generation firewall (NGFW) FortiGate?. A. Internet Service Database (ISDB) engine. B- Intrusion prevention system engine. C. Antivirus engine. D. Application control engine.

A FortiGate administrator is required to reduce the attack surface on the SSL VPN portal. Which SSL timer can you use to mitigate a denial of service (DOS) attack?. A. SSL VPN dtls-hello-timeout. B. SSL VPN http-request-header-timeout. C. SSL VPN login-timeout. D. SSL VPN idle-timeout.

A FortiGate firewall policy is configured with active authentication however, the user cannot authenticate when accessing a website. Which protocol must FortiGate allow even though the user cannot authenticate?. A. ICMP. B. DNS. C. DHCP. D. LDAP.

Refer to exhibit. An administrator configured the web filtering profile shown in the exhibit to block access to all social networking sites except Twitter. However, when users try to access twitter.com, they are redirected to a FortiGuard web filtering block page. Based on the exhibit, which configuration Change can the administrator make to allow Twitter while blocking all Other social networking sites?. A. On the Static URL Fitter configuration set Type to Simple. B. On the FortiGuard Category Based Fitter configuration set Action to Waming for Social Networking. C. On the Static URL Filter configuration set Action to Monitor. D. On the URL Filter configuration set Action to Exempt.

There are multiple dial-up IPsec VPNs configured in aggressive mode on the HQ FortiGate. The requirement is to connect dial-up users to their respective department VPN tunnels. Which phase 1 setting you can configure to match the user to the tunnel?. A. Peer ID. B- Local Gateway. C. Dead Peer Detection. D. IKE Config.