Process Integration_completo

A SOAP client calls a PI, using the sender SOAP adapter. Which of the following statements correctly describe using the quality of service of 'Exactly Once'? Note: There are 2 correct answers to this question. A receiver determination is not necessary. A message ID must be provided with the message, otherwise an error will occur. If the message ID has been used before, the message will be marked as duplicate and then discarded. When providing the message ID externally, the parameters 'Use Encoded Headers' and 'Use Query String' must be set to true.

Which statements describe asynchronous messages within an SAP NetWeaver Process Integration dual stack? There are 2 correct answers to this question. They are persisted on the Integration Server and can be re-sent from this location in case of problems. They are processed in a different pipeline from synchronous messages. They are queued for processing by the Integration Engine. They cannot be cancelled. They are not persisted on the Integration Server unless logging is switched on.

Process Integration has the capability to use multiple mappings between interfaces. Which of these statements correctly describes working with multiple mapping steps? Response: All mappings are declared in Operation Mappings within the Enterprise Services Repository. The types of mappings and the names of the mapping programs can be specified there. All the mapping steps are declared in Interface Determination within the Integration Builder, where the interfaces and all the mapping programs for each interface are specified. All the mapping steps are configured in the Message tab of the Message Mapping within the Enterprise Service Repository. Multiple mappings within an Operation Mapping should be registered in the SLD.

You use an asynchronous-to-synchronous bridge in your integration process. What happens to the quality of the service descriptor in the SOAP header when a message is processed through the Integration Engine? Please choose the correct answer. It changes from Best Effort (BE) to Exactly Once (EO). It changes from Exactly Once (EO) to Best Effort (BE). t changes from Best Effort (BE) to Exactly Once In Order (EOIO). It changes from Exactly Once (EO) to Exactly Once In Order (EOIO).

In a customer scenario, messages are sent from the PI Integration Server to the Advanced Adapter Engine. What is the sequence of steps of a typical message flow through the adapter engine?. Message arrives in the adapter engine via JMS, message is persisted, multiple module processors are called, and message is delivered to backend system. Message arrives in the adapter engine via HTTP, module processors are called, message is persisted, and message is delivered to backend system. Message arrives in the adapter engine via RFC protocol, message is persisted, multiple module processors are called, and message is delivered to backend system. Message arrives in the adapter engine via HTTP, message is persisted, module processors are called, and message is delivered to backend system.

After you have activated an integration process, you check the transaction SXI_CACHE. A return code is displayed for your integration process that is unequal to 0.What do you check to solve this issue?. Whether the event trace is switched on (transaction SWELS). Whether the status of the process signature is set to incomplete. Whether the activation log file contains error messages. Whether the Customizing is complete (transaction SWF_XI_CUSTOMIZING).

The communication between the Integration Server and the backend applications can be achieved without adapters. Which message protocol should you use for this communication type?. PI-SOAP Protocol. File. JDBC 2.0. RFC-XML.

Which objects are available in the design environment to reuse Java code across different message mappings? There are 2 correct answers to this question. Imported Archive. External Definition. Function Module. Function Library.

When deciding whether an integration process might be the right solution for your integration scenario, you have to consider some prerequisites. Which of them are relevant for integration processes? Note: There are 3 correct answers to this question. The scenario does not require complex user interaction. The messages to be processed are related to each other in some way. The process should have a clear end condition. The scenario must require synchronous communication.

What are the key capabilities of SAP NetWeaver Process Integration? There are 3 correct answers to this question. Routing. Connectivity. Mapping. Multi-channel access. Master data management.

You have implemented a scenario where IDocs are posted to an ERP system using the receiver IDoc adapter. Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI? Note: There are 3 correct answers to this question. IDoc packages are not supported, unless all IDocs are collected by BPM. Quality of service EOIO (exactly once in order) is supported, provided that the target system is a SAP Web AS 6.40 or above. A receiver communication channel must be defined in the Integration Builder. Specific fields in the IDoc control record can be overwritten using the 'header mapping' functionality in the Receiver Agreement. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best effort) and EO (exactly once) can be used.

Which of the following interface patterns uses the Web service runtime? There are 3 correct answers to this question. Stateless. Stateless (compatible with XI 3.0). Tentative Update & Compensate/Confirm (TU&C/C). Synchronous. Stateful.

Integration Processes run on the SAP Business Workflow Engine of the SAP NetWeaver AS ABAP. When monitoring a workflow that was started by an Integration Process, which of following could be a valid status for a workflow execution? Note: There are 3 correct answers to this question. Reprocessed. Cancelled. Error. Hold. Started.

Which types of acknowledgment are available for asynchronous communication in Process Integration? There are 2 correct answers to this question. Application Acknowledgment. Java Acknowledgment. ABAP Acknowledgment. HTTP Acknowledgment. System Acknowledgment.

You have configured and activated a SOAP communication channel on a dual-stack system. Now you want to monitor the status of this SOAP adapter. Which of the following tools can you use? There are 3 correct answers to this question. SOA Manager. SAP Solution Manager. Transaction SXMB_MONI. Central PI Monitoring (PiMon). Runtime Workbench.

Your mapping program concatenates 2 source elements in order to create a target element. The target element has the max. occurrence property set to "1…unbounded". During testing, the 1st source element occurs 2 times; the 2nd source element occurs 4 times. How many times does the target element appear in the target message?. 6. 2. 4. 8.

In SAP NetWeaver Process Integration, you can use operation mapping either to transform the payload or to determine the receiver dynamically. Which configuration objects can you use to reference operation mapping? There are 2 correct answers to this question. Receiver Agreement. Interface Agreement. Interface Determination. Receiver Determination.

In order to support portability and interoperability of integration processes, SAP supports and implements a large set of industry standards. Which of these standards are supported by SAP NetWeaver Process Integration? Note: There are 3 correct answers to this question. BPEL4WS1.1. WS-BPEL 2.0. UDDIv3. XPDL.

There are three task areas in the Integration Directory: Collaboration Profiles, Logical Routing, and Collaboration Agreements. What do you define in a Collaboration Agreement?. The flow of messages in a system landscape. The technical options available to the communication parties for exchanging messages are documented. The security settings for specific sender/receiver pairs. A Business Process is imported into the Integration Directory.

You are running an SAP NetWeaver dual-stack system (ABAP + Java). Which of the following adapters are implemented on both stacks? There are 2 correct answers to this question. SOAP. WS-RM. HTTP. IDoc.

When creating a Technical System in the System Landscape Directory you select and add the Software Products that are installed on this Technical System. As an option you can de-select the Software Components associated with the selected Products. Why is this option necessary?. The Software Component is required only for transport purposes. The appropriate Technical System may not include all possible components of the selected products. The developer using the Technical System description may not have sufficient authorization to work with the Software Component in question. Certain Software Components might not be part of the particular version of the product.

In which cases do you need to use ccBPM processes? There are 2 correct answers to this question. When querying databases. When using scenarios that are based on an AEX installation. When using a synchronous/asynchronous bridge. When collecting messages.

SAP NetWeaver Process Integration supports major key capabilities within the integration area. What areas belong to these capabilities? Note: There are 3 correct answers to this question. Knowledge Warehouse. Enterprise Service Repository and Registry. Service Bus. BAM Infrastructure.

Which SAP NetWeaver Process Integration component belongs to the configuration-time area? There are 2 correct answers to this question. Enterprise Services Repository. SAP NetWeaver Developer Studio. Business Process Engine. Runtime Workbench. Integration Directory.

The PI Mail adapter is used to send and receive emails. Which protocols are supported? Note: There are 3 correct answers to this question. HTTP. IMAP4. POP3. SMTP.

Business systems are systems which function as sender or receiver within SAP NetWeaver PI. Which parameter defines the type of Business system in the SLD?. The type of Business system is defined by the used connectivity mode. The type of Business system is defined by the type of associated technical system. The type of Business systems is always Third-Party. The type of Business system is created when the systems register automatically on the SLD.

Which of the following SAP NetWeaver components use Enterprise Services Repository? There are 2 correct answers to this question. SAP NetWeaver Developer Studio. SAP NetWeaver Portal. SAP NetWeaver Mobile. SAP NetWeaver Business Warehouse. SAP NetWeaver Process Integration.

Which statements are correct when using the Receiver File adapter to process XML messages? Note: There are 2 correct answers to this question. The quality of service can be 'best effort' (BE) only. The adapter can FTP the file to a remote directory. The adapter can convert the XML payload into a flat file. The messages are processed based on a poll cycle.

The SAP NetWeaver Process Integration single-stack installation comprises which of the following usage types? There are 2 correct answers to this question. Application Server ABAP (AS ABAP). SAP NetWeaver Process Integration. Advanced Adapter Engine Extended. Application Server Java (AS Java). Search and Classification (TREX).

SAP NetWeaver provides the Enterprise Services Repository Content (ESR Content). What is one of the advantages of using ESR Content? Please choose the correct answer. Additional configuration options for the Advanced Adapter Engine Extended. Extended monitoring capabilities based on predefined business objects. High user acceptance based on standard compliant user interfaces. Fast implementation based on preconfigured content that supports industry standards.

Where can you maintain content-based routing? Please choose the correct answer. In the receiver determination. In the value mapping group. In the receiver agreement. In the sender agreement.

Which of the following tasks can you perform in the Runtime Workbench? There are 2 correct answers to this question. Check the Alert Inbox. Monitor the ccBPM integration process. Configure the Integration Engine. Stop certain communication channels. Configure a user-defined message search.

Which transaction can be used in order to configure the Business Process Engine? Note: There are 2 correct answers to this question. SWF_INB_CONF. SWIA. SWF_XI_CUSTOMIZING. SMQ2.

When should you refresh the runtime cache of the Integration Server and the Adapter Framework? Please choose the correct answer. When refreshing the view in the CPA cache. When starting transaction SXI_CACHE. When saving a configuration scenario in the Integration Directory. When activating a change list in the Integration Directory.

A mapping requires the concatenation of 2 source elements in order to create a target element. During testing, the 1st source element occurs 2 times; the 2nd source element occurs 4 times. How many occurrences will the target element contain?. The target will occur 8 times. This is based on the total number of possible concatenations between the occurrences of the 2 elements. The number is the product of (2 * 4). The target will occur 6 times. This is based on the sum of the number of occurrences for both elements. The target will occur 2 times. This is based on the minimum number of occurrences between the 2 elements. The target will occur 4 times. This is based on the maximum number of occurrences between the 2 elements.

After reviewing the specifications for a transformation, you found out that you need to save certain data for a later retrieval during the mapping process. Which technique helps you to accomplish this goal?. You can use the GlobalContainer object to store the values in parameters which can be retrieved later in the same message mapping. You can use the Container object to store the values in parameters which can be retrieved later in the same message mapping. The GlobalContainer object can be used to save and retrieve data by multiple message mappings. The data is stored as persistent objects in the database, therefore, care must be taken to re-initialize, clear or delete the data. You must use user-defined functions with execution type set to "All Values of Queue" or you will not have access to the required java objects Container and GlobalContainer.

Which of the following are use cases for an Advanced Adapter Engine Extended (AEX) standalone installation? There are 2 correct answers to this question. Use AEX as a test environment. Use AEX as "lightweight" and low-cost integration middleware. Use AEX as a central monitoring environment. Use AEX as a "lightweight" and low-cost integration Web server.

While monitoring the customer's production system you notice that there are many messages in the Advanced Adapter Engine with the status HOLD. Why do the messages have this status? Please choose the correct answer. The messages are being sent using a communication channel that has been configured in the Availability Time Planning tool in the Runtime Workbench. The receiver system is currently down for maintenance. Once the receiver system is back the messages will be delivered. The messages are using event-driven message processing and will be sent when the necessary event is triggered. The messages are Exactly Once in Order (EOIO) quality of service and the first message in the queue has not yet been delivered successfully.

By using a mapping lookup, mapping programs can call functions from other application systems while a mapping program on the Integration Server is being executed. Why might this be necessary? Note: There are 2 correct answers to this question. To enable user interaction at runtime. To write data to a database from a mapping. To call existing mapping routines in the application system. To read from application system data in the mapping program.

After you have created a Business System in the SLD, you can assign a transport target to this system. What is the purpose of a transport target?. Transport targets describe software dependencies. With transport targets, you can associate the names of corresponding Business Systems in different Business-System-groups. Transport targets can be imported into the Integration Builder. A transport target is a SAP NetWeaver PI component to support the software logistic tasks.

Which of the following configuration objects can you use to activate XML validation of a message payload in SAP NetWeaver Process Integration? There are 3 correct answers to this question. Sender agreement. Receiver agreement. Receiver determination. Integrated configuration. Interface determination.

Which functions are provided by the Receiver File adapter? There are 2 correct answers to this question. Conversion of XML payload into a flat file. Delivery of a file to an FTP server via the FTP protocol. Processing of a message based on a polling interval. Delivery of synchronous messages.

Which setting does SAP recommend for the delivery mode of inbound processing in a ccBPM process without correlation? Please choose the correct answer. Without Buffering (Obsolete). Without Buffering. Buffering Auto-Delete. Buffering Possible.

You used the direct connection configuration object to configure a direct communication scenario between two business systems. Where is the direct connection scenario executed? Please choose the correct answer. In the local Mapping Runtime. In the non-central Advanced Adapter Engine. In the central Integration Engine. In the local Web Services Runtime.

Which of the following mapping types are supported in SAP NetWeaver PI? There are 3 correct answers to this question. C++. Java. XSLT. .Net. Message Mapping.

An application sends messages to the Integration Server. These messages should be processed with high priority. What configuration tasks do you have to perform to enable message prioritization? There are 3 correct answers to this question. Register the high-priority queues. Set the RUNTIME/PACKAGING parameter in transaction SXMB ADM. Define the message filter. Define the sender ID. Set the "high priority" indicator in the communication channel monitor of the Runtime Workbench.

Which of the following configuration objects do you use to configure message processing on the Advanced Adapter Engine? Please choose the correct answer. Classical configuration. Receiver determination. Sender agreement. Integrated configuration.

Which SAP NetWeaver Process Integration component belongs to the design-time area? There are 2 correct answers to this question. Response: SAP NetWeaver Developer Studio. Business Process Engine. Enterprise Services Repository. SAP NetWeaver Administrator.

You want to implement exception handling in your ccBPM process. Which step types can trigger an exception? There are 3 correct answers to this question. Control. Transformation. Receive. Send. Wait.

You are implementing an IDoc-based scenario using SAP Netweaver PI and more specifically the sender IDoc adapter. Which of these steps are mandatory for the sender IDoc adapter to function properly? Note: There are 3 correct answers to this question. IDoc metadata must be imported into the Enterprise Services Repository. An RFC destination must be defined on the sender system, pointing to the Integration Server client. The Logical System name (ALE name) for the Business System must be defined in the SLD. A sender communication channel must be defined in the Integration Builder.

You are working on a dual-stack system and want to configure an integration scenario with one sender and two receivers. Each receiver uses two different service interfaces. The WS adapter is used for each receiver. The sender provides an IDoc from an ABAP system. How many sender agreements do you have to configure? Please choose the correct answer. 0. 1. 3. 2.

Which modeling environments does Enterprise Services Repository offer in SAP NetWeaver Process Integration? There are 2 correct answers to this question. Visual Composer. Process Component Architecture Model. Process Integration scenario. Unified Modeling Language (UML). Business process modeling notation (BPMN).

When messages are processed by the Advanced Adapter Engine, which concepts are correct with regards to monitoring? Note: There are 3 correct answers to this question. The adapter engine and the integration engine share the same persistence layer. The detailed status of the messages can be monitored by looking at the audit log via the Runtime Workbench or the NWA. The status of the messages in the adapter engine can be monitored by drilling down into the MSGUID from the transaction sxmb_moni. The messages are processed in the adapter engine with the same MSGUID as in the Integration Server. The RFC adapter and SOAP adapter can be monitored directly in the Advanced Adapter Engine.

You are not using Integration Engine processing in your system. You are troubleshooting configuration errors with the Advanced Adapter Engine (AAE) as messages are not reaching the target system. What is a typical sequence of checks that needs to be performed? Please choose the correct answer. Connectivity -> Routing -> Mapping Runtime. Mapping runtime -> Routing -> Connectivity. Receiver Determination -> Interface Determination -> Mapping -> Technical Routing -> Call Adapter. Routing -> Mapping Runtime -> Connectivity.

After you create a business system in the System Landscape Directory, you can assign a transport target to this business system. What is the purpose of a transport target? Please choose the correct answer. Transport targets are the names of technical systems that correspond to each other but are located in different technical system groups. Transport targets describe the message flow in messages sent from the business system that are located in different business system groups. Transport targets are the names of business systems that correspond to each other but are located in different business system groups. Transport targets are used to enhance performance of the transport process between systems that are located in different business system groups.

Application systems with a Local Integration Engine are able to communicate via PI protocol (SOAP with attachments) with the Central Integration Engine. Which of these statements correctly describe this type of communication? Note: There are 2 correct answers to this question. The local Proxy-Runtime converts between PI protocol and ABAP or Java format. Proxy communication does not require adapters. The application systems send messages directly to the Advanced Adapter Engine via the SOAP adapter. The application systems send messages directly to the Advanced Adapter Engine via PI protocol.

How can you describe a provider proxy? Please choose the correct answer. A provider proxy is a language-specific implementation of an outbound service interface. A provider proxy is a Java class used in the Advanced Adapter Engine. A provider proxy is an ABAP program used in ALE distribution. A provider proxy is a language-specific implementation of an inbound service interface.

Whenever you are using Web services in business-critical applications, it is important that messages are exchanged in a reliable manner. Which statements correctly describe the features of the Web Service Reliable Messaging Protocol (WS-RM)? Note: There are 3 correct answers to this question. The WS-RM protocol combines one or multiple messages into sequences. WS-RM should be implemented at sender and receiver sides. A sequence covers all calls of a logical unit of work (LUW) and assigns numbers to them. WS-RM is a protocol for synchronous communication.

You want to import a business system from the System Landscape Directory (SLD) to the Integration Directory to use it for configuration.What is one purpose of the assignment of a software component to a technical system in the SLD? Please choose the correct answer. To define the software component hierarchy in Enterprise Services Repository. To allow developers to access the technical system description of the imported business system object directly in the Integration Directory. To block any change to the technical system details in SLD. To see the sender/receiver interfaces related to the particular technical system in the imported business systems.

Message Mapping has a concept of "Queue", which can be used in a user-defined function with parameter "Execution Type" set to "All Values of Queue". Which statements correctly describe working with Queues and Contexts in Message Mapping? Note: There are 3 correct answers to this question. Message Mapping works internally by using queues. Node functions are used to handle changes in the message hierarchy. A context contains one or more queues. If no further elements are imported at a particular hierarchy level, a Context Change is inserted in the queue.

Assume that during the mapping process, the customer asks for certain information to be logged to the Process Integration monitor for examination using SXMB_MONI. A user-defined function will be used to perform the appropriate mapping function. Which of these statements correctly describes the user-defined function? choose one: All user-defined functions have access to a global static class, MappingTrace, which can be used to send messages to the PI monitor. An AbstractMapping object must be obtained from the GlobalContainer object. The GlobalContainer object can be obtained from the Container object. Then, AbstractMapping can be used to send messages to the PI monitor. An AbstractTrace object must be obtained from the Container object. Then, it can be used to send messages to the PI monitor. A user-function cannot be used to send information to the PI monitor.

Enabling service consumption in a consumer application is a three step process. Which of these steps are relevant within this process? Note: There are 3 correct answers to this question. Create a Composite Application for Service Consumption. Implement the service call within the consumer application. Generate Consumer Proxy. Configure Service Consumer.

You can influence the transactional behavior during the definition of an integration process in the process editor. This can improve the performance of your integration process. Which step types allow the suppression of the creation of a new transaction? Note: There are 3 correct answers to this question. Response: Receive Step. Receiver Determination Step. Send Step. Transformation Step.

What is the purpose of the JMS adapter? Please choose the correct answer. To communicate with a messaging system asynchronously. To communicate with a mail server asynchronously. To communicate with a messaging system synchronously. To communicate with a mail server synchronously.

Which statements correctly describe asynchronous messages within a PI environment? Note: There are 3 correct answers to this question. They are processed in a different pipeline as synchronous messages. They are queued for processing by the Integration Engine. They are persisted on the Integration Server and can be re-sent from this location in case of problems. They are not persisted on the Integration Server unless logging is switched on. They are processed with Quality of Service (QoS) Exactly Once (EO) or Exactly Once In Order (EOIO).

Which of these operations can be performed by a Container Operation step? Note: There are 2 correct answers to this question. Removing a message from a multiline container element. Setting the value of an XML element of a message. Incrementing a counter variable. Appending a message to a multiline container element.

Which of the following adapters uses polling to retrieve messages from the sender communication component? Please choose the correct answer. HTTP. JMS. RFC. SOAP.

Which of the following configuration tasks do you have to perform to set up the Process Integration sender JDBC adapter to query a database table? There are 2 correct answers to this question. Set the HTTP POST statement in the communication channel. Insert the class of the vendor JDBC driver in the communication channel. Insert a query SQL statement in the communication channel. Specify the client of the Integration Server.

If a system error occurs in a send step, an alert can be triggered for Alert Management and the integration process should then be terminated. Where do you define the Alert Category for the appropriate Control Step?. Within the Enterprise Services Builder. Within the SLD. Within the transaction ALRTCATDEF on the Integration Server. Within the Process Editor.

Why would you use message mapping rather than XSLT mapping? Please choose the correct answer. Only message mapping can be used in operation mapping. Only message mapping is part of the SAP NetWeaver PI development environment. Only message mapping offers the capability to integrate Java methods. Only message mapping can be developed outside the SAP NetWeaver PI development environment.

You want to implement an IDoc-based scenario that uses SAP NetWeaver Process Integration. What are the prerequisites for this? There are 2 correct answers to this question. The IDoc adapter must have access to the IDoc metadata to enable conversion between IDoc and XI message format at runtime. The logical system name (ALE name) for the business system must be defined in the SLD. A sender communication channel must be defined in the service registry. IDoc metadata must be imported into the Enterprise Services Repository to enable IDoc conversion to XML at runtime.

You have created a deadline branch. When the deadline expires, the integration process should be canceled. How can you achieve this using SAP design patterns for integration processes? Please choose the correct answer. Insert a control step in the deadline branch that cancels the process. Insert a switch to send a message to another integration process to cancel the process. No action is necessary; the process is canceled automatically once the deadline has expired. Insert a control step that raises an alert to inform the administrator to stop the process manually.

The CPA Cache is a key component of the adapter engine. Which statement correctly describes the features of the CPA cache?. The CPA Cache can be administered using the transaction SXMB_ADM. The CPA Cache can be modified online with the SAP NetWeaver Administrator. In the CPA Cache, the object of type 'binding' corresponds to a communication channel in the directory. If necessary, the CPA Cache refresh can be initiated manually from transaction SXI_CACHE.

Which object do you create when implementing local message processing using the Advanced Adapter Engine? Please choose the correct answer. Adapter object. Receiver determination object. Integrated configuration object. Integration process object.

The Advanced Adapter Engine is installed as a component on the Integration Server. When would you install the non-central Advanced Adapter Engine? Please choose the correct answer. When the business department requires Knowledge Management on a separate system. When you want to use cross-component business process management (ccBPM) in the Advanced Adapter Engine. When you want to use the advanced monitoring capabilities of the Integration Engine. When a firewall between the business system and the Integration Server prevents them from communicating directly.