Refer to the exhibit. An administrator is running a sniffer command as shown in the exhibit.
Which three pieces of information are included in the sniffer output? (Choose three.)
Interface name Ethernet header IP header Application header Packet payload.
The exhibit contains the configuration for an SD-WAN Performance SLA, as well as the output of diagnose sys virtual-wan-link health-check. Which interface will be selected as an outgoing interface? port2 port4 port1 port3.
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.
Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?
set fortiguard-anycast disable set webfilter-force-off disable set webfilter-cache disable set protocol tcp.
Which contains a network diagram and routing table output. The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem? The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3.
In consolidated firewall policies, IPv4 and IPv6 policies are combined in a single consolidated policy. Instead of separate policies. Which three statements are true about consolidated IPv4 and IPv6 policy configuration? (Choose three.) The IP version of the sources and destinations in a firewall policy must be different. The Incoming Interface. Outgoing Interface. Schedule, and Service fields can be shared with both IPv4 and IPv6. The policy table in the GUI can be filtered to display policies with IPv4, IPv6 or IPv4 and IPv6 sources and destinations. The IP version of the sources and destinations in a policy must match The policy table in the GUI will be consolidated to display policies with IPv4 and IPv6 sources and destinations.
An administrator is running the following sniffer command:
dignose sniffer packet any "host 192.168.2.12" 5
Which three pieces of Information will be Included in me sniffer output? {Choose three.) Interface name Packet payload Ethernet header IP header Application header.
Which CLI command will display sessions both from client to the proxy and from the proxy to the servers? diagnose wad session list diagnose wad session list | grep hook-pre&&hook-out diagnose wad session list | grep hook=pre&&hook=out diagnose wad session list | grep "hook=pre"&"hook=out".
Which two actions can you perform only from the root FortiGate in a Security Fabric? (Choose two.) Shut down/reboot a downstream FortiGate device. Disable FortiAnalyzer logging for a downstream FortiGate device. Log in to a downstream FortiSwitch device. Ban or unban compromised hosts.
Which three statements about security associations (SA) in IPsec are correct? (Choose three.) Phase 2 SAs are used for encrypting and decrypting the data exchanged through the tunnel An SA never expires. A phase 1 SA is bidirectional, while a phase 2 SA is directional Phase 2 SA expiration can be time-based, volume-based, or both Both the phase 1 SA and phase 2 SA are bidirectional.
Which three authentication timeout types are availability for selection on FortiGate? (Choose three.) hard-timeout auth-on-demand soft-timeout new-session Idle-timeout.
NGFW mode allows policy-based configuration for most inspection rules. Which security profile's configuration does not change when you enable policy-based inspection? Web filtering Antivirus Web proxy Application control.
Which statements about the firmware upgrade process on an active-active HA cluster are true? (Choose two.) The firmware image must be manually uploaded to each FortiGate. Only secondary FortiGate devices are rebooted. Uninterruptable upgrade is enabled by default. Traffic load balancing is temporally disabled while upgrading the firmware.
Which statement regarding the firewall policy authentication timeout is true? It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets coming from the user's source IP. It is a hard timeout. The FortiGate removes the temporary policy for a user's source IP address after this timer has expired. It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets coming from the user's source MAC. It is a hard timeout. The FortiGate removes the temporary policy for a user's source MAC address after this timer has expired.
Which of the following statements correctly describes FortiGates route lookup behavior when searching for a suitable gateway? (Choose two) Lookup is done on the first packet from the session originator Lookup is done on the last packet sent from the responder Lookup is done on every packet, regardless of direction Lookup is done on the trust reply packet from the responder.
Examine the network diagram shown in the exhibit, then answer the following question:
Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server? 172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0] 0.0.0.0/0 [20/0] via 10.4.200.2, port2 10.4.200.0/30 is directly connected, port2 172.16.32.0/24 is directly connected, port1.
Which of the following statements about central NAT are true? (Choose two.) IP tool references must be removed from existing firewall policies before enabling central NAT. Central NAT can be enabled or disabled from the CLI only. Source NAT, using central NAT, requires at least one central SNAT policy. Destination NAT, using central NAT, requires a VIP object as the destination address in a firewall.
Which of the following conditions must be met in order for a web browser to trust a web server certificate
signed by a third-party CA? The public key of the web server certificate must be installed on the browser. The web-server certificate must be installed on the browser. The CA certificate that signed the web-server certificate must be installed on the browser. The private key of the CA certificate that signed the browser certificate must be installed on the browser.
A user behind the FortiGate is trying to go to http://www.addictinggames.com (Addicting Games). Based on this configuration, which statement is true? Addicting.Games is allowed based on the Application Overrides configuration. Addicting.Games is blocked on the Filter Overrides configuration Addicting.Games can be allowed only if the Filter Overrides actions is set to Exempt. Addcting.Games is allowed based on the Categories configuration.
Which statement about the IP authentication header (AH) used by IPsec is true? AH does not provide any data integrity or encryption. AH does not support perfect forward secrecy. AH provides data integrity bur no encryption AH provides strong data integrity but weak encryption.
The exhibits show a network diagram and the explicit web proxy configuration. In the command diagnose sniffer packet, what filter can you use to capture the traffic between the client and the explicit web proxy? host 192.168.0.2 and port 8080' host 10.0.0.50 and port 80' host 192.168.0.1 and port 80' host 10.0.0.50 and port 8080'.
How do you format the FortiGate flash disk? Load a debug FortiOS image. Load the hardware test (HQIP) image. Execute the CLI command execute formatlogdisk. Select the format boot device option from the BIOS menu.
If the Services field is configured in a Virtual IP (VIP), which statement is true when central NAT is used? The Services field prevents SNAT and DNAT from being combined in the same policy. The Services field is used when you need to bundle several VIPs into VIP groups. The Services field removes the requirement to create multiple VIPs for different services. The Services field prevents multiple sources of traffic from using multiple services to connect to a single computer.
What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.) Traffic to botnetservers Traffic to inappropriate web sites Server information disclosure attacks Credit card data leaks SQL injection attacks.
Examine this PAC file configuration.
Which of the following statements are true? (Choose two.) Browsers can be configured to retrieve this PAC file from the FortiGate. Any web request to the 172.25.120.0/24 subnet is allowed to bypass the proxy. All requests not made to Fortinet.com or the 172.25.120.0/24 subnet, have to go through altproxy.corp.com: 8060. Any web request fortinet.com is allowed to bypass the proxy.
Which statements best describe auto discovery VPN (ADVPN). (Choose two.) It requires the use of dynamic routing protocols so that spokes can learn the routes to other spokes. ADVPN is only supported with IKEv2. Tunnels are negotiated dynamically between spokes. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance.
Which of the following statements are correct? (Choose two.) This setup requires at least two firewall policies with the action set to IPsec. Dead peer detection must be disabled to support this type of IPsec setup. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the
TunnelB VPN is down. This is a redundant IPsec setup.
To complete the final step of a Security Fabric configuration, an administrator must authorize all the devices on which device? FortiManager Root FortiGate FortiAnalyzer Downstream FortiGate.
If the Issuer and Subject values are the same in a digital certificate, which type of entity was the certificate issued to? A CRL A person A subordinate CA A root CA.
Which statement about the log message is true? The action for the category Games is set to block. The usage quota for the IP address 10.0.1.10 has expired The name of the applied web filter profile is default. The web site miniclip.com matches a static URL filter whose action is set to Warning.
Which statements are true regarding firewall policy NAT using the outgoing interface IP address with fixed port disabled? (Choose two.) This is known as many-to-one NAT. Source IP is translated to the outgoing interface IP. Connections are tracked using source port and source MAC address. Port address translation is not used.
According to the certificate values shown in the exhibit, which type of entity was the certificate issued to? A user A root CA A root CA A subordinate.
Which of the following are valid actions for FortiGuard category based filter in a web filter profile ui proxy-based inspection mode? (Choose two.) Warning Exempt Allow Learn.
Which of the following are purposes of NAT traversal in IPsec? (Choose two.) To detect intermediary NAT devices in the tunnel path. To dynamically change phase 1 negotiation mode aggressive mode. To encapsulation ESP packets in UDP packets using port 4500 To force a new DH exchange with each phase 2 rekey.
An administrator has configured a route-based IPsec VPN between two FortiGate devices. Which statement about this IPsec VPN configuration is true? A phase 2 configuration is not required. This VPN cannot be used as part of a hub-and-spoke topology. A virtual IPsec interface is automatically created after the phase 1 configuration is completed. The IPsec firewall policies must be placed at the top of the list.
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy- based mode? It limits the scope of application control to the browser-based technology category only. It limits the scope of application control to scan application traffic based on application category only. It limits the scope of application control to scan application traffic using parent signatures only It limits the scope of application control to scan application traffic on DNS protocol only.
Examine the IPS sensor and DoS policy configuration shown in the exhibit, then answer the question below. When detecting attacks, which anomaly, signature, or filter will FortiGate evaluate first? SMTP.Login.Brute.Force IMAP.Login.brute.Force ip_src_session Location: server Protocol: SMTP.
Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.) Log downloads from the GUI are limited to the current filter view Log backups from the CLI cannot be restored to another FortiGate. Log backups from the CLI can be configured to upload to FTP as a scheduled time Log downloads from the GUI are stored as LZ4 compressed files.
Which the FortiGate handle web proxy traffic true? (Choose two.) Broadcast traffic received in port1-VLAN10 will not be forwarded to port2-VLAN10. port-VLAN1 is the native VLAN for the port1 physical interface. port1-VLAN10 and port2-VLAN10 can be assigned to different VDOMs. Traffic between port1-VLAN1 and port2-VLAN1 is allowed by default.
When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP address is used as the source of the HTTP request? remote user's public IP address The public IP address of the FortiGate device. The remote user's virtual IP address. The internal IP address of the FortiGate device.
An administrator observes that the port1 interface cannot be configured with an IP address. What can be the reasons for that? (Choose three.) The interface has been configured for one-arm sniffer. The interface is a member of a virtual wire pair The operation mode is transparent. The interface is a member of a zone. Captive portal is enabled in the interface.
Examine the exhibit, which contains a virtual IP and firewall policy configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port2) interface has the IP address 10.0.1.254/24.
The first firewall policy has NAT enabled on the outgoing interface address. The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the Internet traffic coming from a workstation with the IP address 10.0.1.10/24? 10.200.1.10 Any available IP address in the WAN (port1) subnet 10.200.1.0/24 10.200.1.1 10.0.1.254.
Examine this FortiGate configuration:
Based on the diagnostic outputs above, how is the FortiGate handling the traffic for new sessions that require inspection? It is allowed, but with no inspection It is allowed and inspected as long as the inspection is flow based It is dropped. It is allowed and inspected, as long as the only inspection required is antivirus.
Which of the following statements is true regarding SSL VPN settings for an SSL VPN portal? By default, FortiGate uses WINS servers to resolve names. By default, the SSL VPN portal requires the installation of a client's certificate. By default, split tunneling is enabled. By default, the admin GUI and SSL VPN portal use the same HTTPS port.
Examine the two static routes shown in the exhibit, then answer the following question.
Which of the following is the expected FortiGate behavior regarding these two routes to the same destination? FortiGate will load balance all traffic across both routes. FortiGate will use the port1 route as the primary candidate. FortiGate will route twice as much traffic to the port2 route FortiGate will only actuate the port1 route in the routing table.
Examine the IPS sensor configuration shown in the exhibit, and then answer the question below.
An administrator has configured the WINDOWS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic.
What is a possible reason for this?
The IPS filter is missing the Protocol: HTTPS option. The HTTPS signatures have not been added to the sensor A DoS policy should be used, instead of an IPS sensor. A DoS policy should be used, instead of an IPS sensor. The firewall policy is not using a full SSL inspection profile.
Which of the following SD-WAN load balancing method use interface weight value to distribute traffic? (Choose two.) Source IP Spillover Volume Session.
Which certificate value can FortiGate use to determine the relationship between the issuer and the certificate? Subject Key Identifier value SMMIE Capabilities value Subject value Subject Alternative Name value.
The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address.
An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies.
The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form- based authentication scheme for the FortiGate local user database. Users will be prompted for authentication.
How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP
10.0.1.10 to the destination http://www.fortinet.com? (Choose two.)
If a Mozilla Firefox browser is used with User-B credentials, the HTTP request will be allowed. If a Google Chrome browser is used with User-B credentials, the HTTP request will be allowed. If a Mozilla Firefox browser is used with User-A credentials, the HTTP request will be allowed. If a Microsoft Internet Explorer browser is used with User-B credentials, the HTTP request will be allowed.
The exhibit contains a network interface configuration, firewall policies, and a CLI console configuration. How will FortiGate handle user authentication for traffic that arrives on the LAN interface? If there is a full-through policy in place, users will not be prompted for authentication. Users from the Sales group will be prompted for authentication and can authenticate successfully with the correct credentials. Authentication is enforced at a policy level; all users will be prompted for authentication. Users from the HR group will be prompted for authentication and can authenticate successfully with the correct credentials.
Which statement best describes the role of a DC agent in an FSSO DC agent mode solution? It captures the login events and forwards them to FortiGate. It captures the login and logoff events and forwards them to the collector agent. It captures the login events and forwards them to the collector agent. It captures the user IP address and workstation name and forwards them to FortiGate.
Which two statements about FortiGate antivirus databases are true? (Choose two.) The extended database is available only if AI scanning is enabled. The extreme database is available only on certain FortiGate models. The extended database is available on all FortiGate models. The quick scan database is part of the normal database.
A user at 192.168.32.15 is trying to access the web server at 172.16.32.254.
Which two statements best describe how the FortiGate will perform reverse path forwarding (RPF) checks on this traffic? (Choose two.) Strict RPF check will allow the traffic. Loose RPF check will deny the traffic. Strict RPF check will deny the traffic. Loose RPF check will allow the traffic.
An administrator configured antivirus profile in a firewall policy set to flow-based inspection mode. While testing the configuration, the administrator noticed that eicar.com test files can be downloaded using HTTPS protocol only.
What is causing this issue?
HTTPS protocol is not enabled under Inspected Protocols. Full content inspection for HTTPS is disabled. Hardware acceleration is in use. The test file is larger than the oversize limit.
Which two statements about the SD-WAN feature on FortiGate are true? (Choose two.) FortiGate supports only one SD-WAN interface per VDOM. An SD-WAN static route does not require a next-hop gateway IP address. SD-WAN provides route failover protection, but cannot load balance traffic. Each member interface requires its own firewall policy to allow traffic.
Examine this partial output from the diagnose sys session list CLI command:
diagnose sys session list
session info: proto=6 proto_state=05 duration=2 expire=78 timeout=3600 flags=00000000 sockflag=00000000 sockport=0 av_idx=0 use=3
What does this output state?
proto_state=05 is the TCP state. proto_state=05 is the ICMP state. proto_state=05 means there is only one-way traffic. proto_state=05 is the UDP state.
date=2021-03-16 time=14:45:16 logid=0317013312 type=utm subtype=webfilter eventtype=ftgd_allow level=notice vd="root" policyid=2 identidx=1 sessionid=31232959 user="anonymous" group="ldap_users" srcip=192.168.1.24 srcport=63355 srcintf="port2" dstip=66.171.121.44 dstport=80 dstintf="port1" service="http" hostname="www.fortinet.com" profiletype="Webfilter_Profile" profile="default" status="passthrough" reqtype="direct" url="/" sentbyte=304 rcvdbyte=60135 msg="URL belongs to an allowed category in policy" method=domain class=0 cat=140 catdesc="custom1"
What does this raw log indicate? (Choose two.)
The traffic originated from 66.171.121.44. The traffic matches the webfilter profile on firewall policy ID 2. FortiGate allowed the traffic to pass 192.168.1.24 is the IP address for www.fortinet.com.
Which three settings and protocols can be used to provide secure and restrictive administrative access to FortiGate? (Choose three.) HTTPS Trusted host SSH FortiTelemetry Trusted authentication.
Which two statements about antivirus scanning in a firewall policy set to proxy-based inspection mode are true? (Choose two.) A file does not need to be buffered completely before it is moved to the antivirus engine for scanning. The client must wait for the antivirus scan to finish scanning before it receives the file. If a virus is detected, a block replacement message is displayed immediately. FortiGate sends a reset packet to the client if antivirus reports the file as infected.
Which two configuration settings are global settings? HA settings Firewall policies User & Device settings FortiGuard settings.
FortiGate has been configured for firewall authentication. When attempting to access an external website, the user is not presented with a login prompt.
What is the most likely reason for this situation?
The user is using a super admin account. No matching user account exists for this user. The user was authenticated using passive authentication. The user is using a guest account profile.
What two settings must you configure when FortiGate is being deployed as a root FortiGate in a Security Fabric topology? (Choose two.) FortiAnalyzer IP address Pre-authorize downstream FortiGate devices FortiManager IP address Fabric name.
Which statement about the HA override setting in FortiGate HA clusters is true? You must configure override settings manually and separately for each cluster member. It synchronizes device priority on all cluster members. It enables monitored ports. It reboots FortiGate.
Examine the exhibit, which shows a FortiGate with two VDOMs: VDOM1 and VDOM2.
Both VDOMs are operating in NAT/route mode. The subnet 10.0.1.0/24 is connected to VDOM1. The subnet 10.0.2.0/24 is connected to VDOM2. There is an inter-VDOM link between VDOM1 and VDOM2. Also, necessary firewall policies are configured in VDOM1 and VDOM2.
Which two static routes are required in the FortiGate configuration to route traffic between both subnets through an inter-VDOM link? (Choose two.) A static route in VDOM1 with the destination subnet matching the subnet assigned to the inter-VDOM link A static route in VDOM2 with the destination subnet matching the subnet assigned to the inter-VDOM link A static route in VDOM1 for the destination subnet of 10.0.2.0/24 A static route in VDOM2 for the destination subnet 10.0.1.0/24.
An administrator needs to create a tunnel mode SSL-VPN to access an internal web server from the internet. The web server is connected to port1. The internet is connected to port2. Both interfaces belong to the VDOM named Corporation.
What interface must be used as the source for the firewall policy that will allow this traffic?
ssl.Corporation ssl.root port1 port2.
Which statement about traffic flow in an active-active HA cluster is true? The ACK from the client is received on the physical MAC address of the primary device. All FortiGate devices are assigned the same virtual MAC addresses for the HA heartbeat interfaces to redistribute to the session The SYN packet from the client always arrives at the primary device first The secondary device responds to the primary device with a SYN/ACK, and then the primary device forwards the SYN/ACK to the client.
Which two statements about the application control profile mode are true? (Choose two.) It cannot be used in conjunction with IPS scanning. It can scan only unsecure protocols It uses flow-based scanning techniques, regardless of the inspection mode used It can be selected in either flow-based or proxy-based firewall policy.
What does the command diagnose debug fsso-polling refresh-user do? It refreshes all users learned through agentless polling It displays status information and some statistics related to the polls done by FortiGate on each DC. It enables agentless polling mode real-time debug. It refreshes user group information from any servers connected to FortiGate using a collector agent.
Examine the exhibit, which shows a firewall policy configured with multiple security profiles.
Which two security profiles are handled by the IPS engine? (Choose two.) IPS Web Filter AntiVirus Application Control.
Which three actions are valid for static URL filtering? (Choose three.) Shape Allow Block Warning Exempt.
Which two statements correctly describe the differences between IPsec main mode and IPsec aggressive mode? (Choose two.) The first packet of aggressive mode contains the peer ID, while the first packet of main mode does not. Aggressive mode supports XAuth, while main mode does not. Main mode cannot be used for dialup VPNs, while aggressive mode can. Six packets are usually exchanged during main mode, while only three packets are exchanged during aggressive mode.
Which load balancing method is not supported in equal cost multipath (ECMP) load balancing, but is supported in SD-WAN? Volume based Source-destination IP based Source IP based Weight based.
What is eXtended Authentication (XAuth) It is an IPsec extension that forces remote VPN users to authenticate using their credentials (username and password). It is an IPsec extension that forces remote VPN users to authenticate using their local ID. It is an IPsec extension that authenticates remote VPN peers using digital certificates. It is an IPsec extension that authenticates remote VPN peers using a preshared key.
An administrator has configured central DNAT and virtual IPs.
Which item can be selected in the firewall policy Destination field?
A VIP object A VIP group An IP pool The mapped IP address object of the VIP object.
Which three methods can be used to deliver the token code to a user who is configured to use two-factor authentication? (Choose three.) FortiToken Email Instant message app SMS text message Voicemail message.
Examine the following log message attributes:
subtype="webfilter" hostname=www.youtube.com profile="default" action="passthrough" msg="URL belongs to a category with warnings enabled"
Which two statements about the log are correct? (Choose two.)
The website was allowed on the first attempt. The user failed authentication The user was prompted to decide whether to proceed or go back. The category action was set to warning.
Examine this FortiGate configuration:
config system global set av-failopen pass
end
config ips global
set fail-open disable end
Examine the output of the following debug command:
# diagnose hardware sysinfo conserve memory conserve mode: on
total RAM: 3040 MB
memory used: 2706 MB 89% of total RAM memory freeable: 334 MB 11% of total RAM
memory used + freeable threshold extreme: 2887 MB 95% of total RAM memory used threshold red: 2675 MB 88% of total RAM
memory used threshold green: 2492 MB 82% of total RAM
Based on the diagnostic outputs above, how is FortiGate handling new packets that require IPS inspection?
They are allowed, but with no inspection. They are allowed and inspected as long as no additional proxy-based inspection is required. They are dropped. They are allowed and inspected.
Examine the exhibit showing a routing table.
Which route will be selected when trying to reach 10.20.30.254? 10.30.20.0/24 [10/0] via 172.20.121.2, port1 0.0.0.0/0 [10/0] via 172.20.121.2, port1 10.20.30.0/26 [10/0] via 172.20.168.254, port2 10.20.30.0/24 [10/0] via 172.20.167.254, port3.
An administrator wants to monitor their network for any probing attempts aimed to exploit existing vulnerabilities in their servers.
Which two items must they configure on their FortiGate to accomplish this? (Choose two.) An application control profile and set all application signatures to monitor A web application firewall profile to check protocol constraints A DoS policy, and log all UDP and TCP scan attempts An IPS sensor to monitor all signatures applicable to the server.
Which two behaviors result from this full (deep) SSL configuration? (Choose two.) A temporary trusted FortiGate certificate replaces the server certificate when the server certificate is trusted. The browser bypasses all certificate warnings and allows the connection. A temporary untrusted FortiGate certificate replaces the server certificate when the server certificate is untrusted. A temporary trusted FortiGate certificate replaces the server certificate, even when the server certificate is untrusted.
A client workstation is connected to FortiGate port2. FortiGate port1 is connected to an ISP router. port2 and port3 are both configured as a software switch.
Which IP address must be configured on the workstation as the default gateway?
The FortiGate management IP address The software switch interface IP address The router IP address The port2 IP address.
Which two statements about incoming and outgoing interfaces in firewall policies are true? (Choose two.) Multiple interfaces can be selected as incoming and outgoing interfaces. A zone can be chosen as the outgoing interface. An incoming interface is mandatory in a firewall policy, but an outgoing interface is optional. Only the any interface can be chosen as an incoming interface.
Which statement about firewall policy NAT is true? You must configure SNAT for each firewall policy. DNAT can automatically apply to multiple firewall policies, based on DNAT rules. SNAT can automatically apply to multiple firewall policies, based on SNAT policies. DNAT is not supported.
What is the purpose of the Policy Lookup feature? It searches the matching policy based on input criteria. It finds duplicate objects in firewall policies. It creates a new firewall policy based on input criteria. It creates packet flow over FortiGate by sending real-time traffic.
What does this raw log indicate? (Choose two.) Traffic matches the application profile on firewall policy ID 1 10.0.1.10 is the IP address for *.cdn.mozilla.net Traffic originated from 13.32.69.150 FortiGate allowed the traffic to pass.
View the exhibit.
Which two behaviors result from this full (deep) SSL configuration? (Choose two.) A temporary trusted FortiGate certificate replaces the server certificate when the server certificate is trusted. The browser bypasses all certificate warnings and allows the connection. A temporary trusted FortiGate certificate replaces the server certificate, even when the server certificate is untrusted. A temporary untrusted FortiGate certificate replaces the server certificate when the server certificate is untrusted.
Which two statements about blocking known Botnet Command and Control domains are true? (Choose two.) This service requires a FortiGuard web filter and IPS license. DNS lookups are checked against the Botnet Command and Control database. The Botnet Command and Control domains can be enabled in the Web Filter profile. You must manually download the Botnet Command and Control database and import it into FortiGate.
Which two statements about FortiGate antivirus databases are true? (Choose two.) The quick scan database is part of the normal database. The extreme database is available only on certain FortiGate models. The extended database is available only if grayware scanning is enabled. The normal database is available on all FortiGate models.
An administrator needs to inspect all web traffic (including Internet web traffic) coming from users connecting to the SSL-VPN.
How can this be achieved?
Assigning public IP addresses to SSL-VPN users Using web-only mode Configuring web bookmarks Disabling split tunneling.
Examine the routing table and sniffer output in the exhibit.
Assuming telnet service is enabled for portl, which statement correctly describes why FGTI is not responding to the SYN packets? The portl interface is administratively down. The connection is dropped because of reverse path forwarding check. The portl interface does not have an IP address. The connection is denied because of forward policy check.
Which two static routes are required in the FortiGate configuration to route traffic between both subnets through an inter-VDOM link? (Choose two.) A firewall policy in VDOM1 to allow the traffic from 10.0.1.0/24 to 10.0.2.0/24 with portl as the source interface and port2 as the destination interface A static route in VDOM1 for the destination subnet of 10.0.1.0/24 A static route in VDOM2 for the destination subnet 10.0.1.0/24 A static route in VDOM2 with the destination subnet matching the subnet assigned to the inter-VDOM link.
Which statement best describes the role of a DC agent in an FSSO DC agent mode solution? It captures the user IP address and workstation name and forwards them to FortiGate It captures the logon events and forwards them to the collector agent. It captures the logon and logoff events and forwards them to the collector agent It captures the logon events and forwards them to FortiGate.
Which three protocols can a client use to authenticate against a FortiGate configured as transparent web proxy? (Choose three.) SMTP SOCKS5 FTP SSH HTTP.
How can you configure the web proxy to block HTTP packets that request a specific HTTP method? Create a firewall service that matches the HTTP method, and apply it to a proxy policy with the action DENY. Apply a web filter profile to a proxy policy that blocks the HTTP method Create a DNS filter that matches the HTTP method, and apply it to a proxy policy with the action DENY. Create a proxy address that matches the HTTP method, and apply it to a proxy policy with the action DENY.
When does the FortiGate enter into fail-open session mode? When memory usage goes above the extreme threshold. When a proxy (for proxy-based inspection) runs out of connections. When memory usage goes above the red threshold. When CPU usage goes above the red threshold.
Examine the FortiGate configuration:
What will happen to unauthenticated users when an active authentication policy
is followed by a fall through policy without authentication? The user must log in again to authenticate. The user will be denied access to resources without authentication. The user will not be prompted for authentication User authentication happens at an interface level.
In an HA cluster operating in active-active mode, which path is taken by the SYN packet of an HTTP session that is offloaded to a secondary FortiGate? Client > secondary FortiGate > primary FortiGate > web server Client > primary FortiGate > secondary FortiGate > primary FortiGate > web server Client > primary FortiGate > secondary FortiGate > web server Client > secondary FortiGate > web server.
The FSSO collector agent set to advanced access mode for the Windows Active Directory uses which convention? LDAP Windows RSSO NTLM.
Which two statements about virtual domains (VDOMs) are true? (Choose two.) Transparent mode and NAT mode VDOMs cannot be combined on the same FortiGate. Each VDOM can be configured with different system hostnames. Different VLAN subinterfaces of the same physical interface can be assigned to different VDOMs. Each VDOM has its own routing table.
What three FortiGate components are tested during the hardware test? (Choose three.) CPU Administrative access HA heartbeat Hard disk Network interfaces.
|
