200-250

1 - HOTSPOT - You plan to deploy an Azure container instance by using the following Azure Resource Manager template. 2 -Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the template. NOTE: Each correct selection is worth one point. Hot Area: Internet user [answer choice]. If Internet Information Services (IIS) in the container fail, [answer choice].

You have an Azure subscription that contains a virtual machine named VM1. VM1 hosts a line-of-business application that is available 24 hours a day. VM1 has one network interface and one managed disk. VM1 uses the D4s v3 size. You plan to make the following changes to VM1: ✑ Change the size to D8s v3. ✑ Add a 500-GB managed disk. ✑ Add the Puppet Agent extension. ✑ Enable Desired State Configuration Management. Which change will cause downtime for VM1?. Enable Desired State Configuration Management. Add a 500-GB managed disk. Change the size to D8s v3. Add the Puppet Agent extension.

You have an app named App1 that runs on an Azure web app named webapp1. The developers at your company upload an update of App1 to a Git repository named Git1. Webapp1 has the deployment slots shown in the following table. You need to ensure that the App1 update is tested before the update is made available to users. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. Swap the slots. Deploy the App1 update to webapp1-prod, and then test the update. Stop webapp1-prod. Deploy the App1 update to webapp1-test, and then test the update. Stop webapp1-test.

You have an Azure subscription named Subscription1 that has the following providers registered: ✑ Authorization ✑ Automation ✑ Resources ✑ Compute ✑ KeyVault ✑ Network ✑ Storage ✑ Billing ✑ Web Subscription1 contains an Azure virtual machine named VM1 that has the following configurations: ✑ Private IP address: 10.0.0.4 (dynamic) ✑ Network security group (NSG): NSG1 ✑ Public IP address: None ✑ Availability set: AVSet ✑ Subnet: 10.0.0.0/24 ✑ Managed disks: No ✑ Location: East US You need to record all the successful and failed connection attempts to VM1. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. Enable Azure Network Watcher in the East US Azure region. Add an Azure Network Watcher connection monitor. Register the MicrosoftLogAnalytics provider. Create an Azure Storage account. Register the Microsoft.Insights resource provider. Enable Azure Network Watcher flow logs.

You need to deploy an Azure virtual machine scale set that contains five instances as quickly as possible. What should you do?. Deploy five virtual machines. Modify the Availability Zones settings for each virtual machine. Deploy five virtual machines. Modify the Size setting for each virtual machine. Deploy one virtual machine scale set that is set to VM (virtual machines) orchestration mode. Deploy one virtual machine scale set that is set to ScaleSetVM orchestration mode.

You plan to create the Azure web apps shown in the following table. What is the minimum number of App Service plans you should create for the web apps?. 1. 2. 3. 4.

1 - HOTSPOT - You have a pay-as-you-go Azure subscription that contains the virtual machines shown in the following table. 2- You create the budget shown in the following exhibit. 3- The AG1 action group contains a user named admin@contoso.com only. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. Hot Area: When the maximum amount in Budget1 is reached [answer choice]. Based on the current usage costs of the virtual machines [answer choice].

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates. You need to view the date and time when the resources were created in RG1. Solution: From the Subscriptions blade, you select the subscription, and then click Programmatic deployment. Does this meet the goal?. Yes. No.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription that contains the resources shown in the following table.the following table VM1 connects to VNET1. You need to connect VM1 to VNET2. Solution: You create a new network interface, and then you add the network interface to VM1. Does this meet the goal?. Yes. No.

You have an Azure Active Directory (Azure AD) tenant named adatum.com that contains the users shown in the following table. Adatum.com has the following configurations: ✑ Users may join devices to Azure AD is set to User1. ✑ Additional local administrators on Azure AD joined devices is set to None. You deploy Windows 10 to a computer named Computer1. User1 joins Computer1 to adatum.com. You need to identify the local Administrator group membership on Computer1. Which users are members of the local Administrators group?. User1 only. User2 only. User1 and User2 only. User1, User2, and User3 only. User1, User2, User3, and User4.

1 - HOTSPOT - You have Azure subscriptions named Subscription1 and Subscription2. Subscription1 has following resource groups: 2- RG1 includes a web app named App1 in the West Europe location. Subscription2 contains the following resource groups: 3 - For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. Hot Area: App1 can be moved RG2. App1 can be moved RG3. App1 can be moved RG4.

HOTSPOT - You have an Azure subscription named Subscription1 that contains the following resource group: ✑ Name: RG1 ✑ Region: West US ✑ Tag: `tag1`: `value1` You assign an Azure policy named Policy1 to Subscription1 by using the following configurations: ✑ Exclusions: None ✑ Policy definition: Append a tag and its value to resources ✑ Assignment name: Policy1 ✑ Parameters: ✑ Tag name: tag2 Tag value: value2 - After Policy1 is assigned, you create a storage account that has the following configuration: ✑ Name: storage1 ✑ Location: West US ✑ Resource group: RG1 ✑ Tags: `tag3`: `value3` You need to identify which tags are assigned to each resource. What should you identify? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: Tags assigned to RG1. Tags assigned to storage1.

1 - HOTSPOT - You have an Azure subscription named Subscription1. In Subscription1, you create an alert rule named Alert1. The Alert1 action group is configured as shown in the following exhibit. 2- Alert1 alert criteria triggered every minute. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point. Hot Area: The number of email message that Alert1 will send in an hours is. The number of SMS messages that Alert2 will send in an hours is.

1 - You have an Azure subscription named Subscription1 that contains the resources shown in the following table. 2 - You create virtual machines in Subscription1 as shown in the following table You plan to use Vault1 for the backup of as many virtual machines as possible. Which virtual machines can be backed up to Vault1?. VM1 only. VM3 and VMC only. VM1, VM2, VM3, VMA, VMB, and VMC. VM1, VM3, VMA, and VMC only. VM1 and VM3 only.

You have an Azure Kubernetes Service (AKS) cluster named AKS1. You need to configure cluster autoscaler for AKS1. Which two tools should you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point. the kubectl command. the az aks command. the Set-AzVm cmdlet. the Azure portal. the Set-AzAks cmdlet.

You create the following resources in an Azure subscription: ✑ An Azure Container Registry instance named Registry1 ✑ An Azure Kubernetes Service (AKS) cluster named Cluster1 You create a container image named App1 on your administrative workstation. You need to deploy App1 to Cluster1. What should you do first?. Run the docker push command. Create an App Service plan. Run the az acr build command. Run the az aks create command.

You have an Azure subscription that contains the resources shown in the following table. You need to configure a proximity placement group for VMSS1. Which proximity placement groups should you use?. Proximity2 only. Proximity1, Proximity2, and Proximity3. Proximity1 only. Proximity1 and Proximity3 only.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates. You need to view the date and time when the resources were created in RG1. Solution: From the Subscriptions blade, you select the subscription, and then click Resource providers. Does this meet the goal?. Yes. No.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates. You need to view the date and time when the resources were created in RG1. Solution: From the RG1 blade, you click Automation script. Does this meet the goal?. Yes. No.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates. You need to view the date and time when the resources were created in RG1. Solution: From the RG1 blade, you click Deployments. Does this meet the goal?. Yes. No.

You have an Azure subscription named Subscription1. You deploy a Linux virtual machine named VM1 to Subscription1. You need to monitor the metrics and the logs of VM1. What should you use?. Azure HDInsight. Linux Diagnostic Extension (LAD) 3.0. the AzurePerformanceDiagnostics extension. Azure Analysis Services.

1 - HOTSPOT - You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine named VM1. You install and configure a web server and a DNS server on VM1. VM1 has the effective network security rules shown in the following exhibit: 2 - Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point. Hot Area: Internet users [answer choice]. If you delete Rule2, Internet users [answer choice].

You plan to deploy three Azure virtual machines named VM1, VM2, and VM3. The virtual machines will host a web app named App1. You need to ensure that at least two virtual machines are available if a single Azure datacenter becomes unavailable. What should you deploy?. all three virtual machines in a single Availability Zone. all virtual machines in a single Availability Set. each virtual machine in a separate Availability Zone. each virtual machine in a separate Availability Set.

You have an Azure virtual machine named VM1 that runs Windows Server 2019. You save VM1 as a template named Template1 to the Azure Resource Manager library. You plan to deploy a virtual machine named VM2 from Template1. What can you configure during the deployment of VM2?. operating system. administrator username. virtual machine size. resource group.

You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs a financial reporting app named App1 that does not support multiple active instances. At the end of each month, CPU usage for VM1 peaks when App1 runs. You need to create a scheduled runbook to increase the processor performance of VM1 at the end of each month. What task should you include in the runbook?. Add the Azure Performance Diagnostics agent to VM1. Modify the VM size property of VM1. Add VM1 to a scale set. Increase the vCPU quota for the subscription. Add a Desired State Configuration (DSC) extension to VM1.

You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by using an Azure Resource Manager template. You need to ensure that NGINX is available on all the virtual machines after they are deployed. What should you use?. Deployment Center in Azure App Service. A Desired State Configuration (DSC) extension. the New-AzConfigurationAssignment cmdlet. a Microsoft Intune device configuration profile.

1 - HOTSPOT - You deploy an Azure Kubernetes Service (AKS) cluster that has the network profile shown in the following exhibit. 2 - Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point. Hot Area: Containers will be assigned an IP address in the [answer choice] subnet. Services in the AKS cluster will be assigned an IP address in the [answer choice] subnet.

1 - HOTSPOT - You have the App Service plan shown in the following exhibit. 2 -The scale-in settings for the App Service plan are configured as shown in the following exhibit. 3- The scale out rule is configured with the same duration and cool down tile as the scale in rule. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point. Hot Area: If after deployment CPU usage is 70 percent for one hour and then reaches 90 percent for five minutes, at that time the total number of instances will be [answer choice]. If after deployment the CPU maintains constant usage of 90 percent for one hour, and then average CPU usage is below 25 percent for nine minutes, at that point the number of instances will be [answer choice].

You have an Azure virtual machine named VM1 that runs Windows Server 2019. The VM was deployed using default drive settings. You sign in to VM1 as a user named User1 and perform the following actions: ✑ Create files on drive C. ✑ Create files on drive D. ✑ Modify the screen saver timeout. ✑ Change the desktop background. You plan to redeploy VM1. Which changes will be lost after you redeploy VM1?. the modified screen saver timeout. the new desktop background. the new files on drive D. the new files on drive C.

You have an Azure subscription. You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit tab.) You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines. What should you modify on VM1?. the memory. the network adapters. the hard drive. the processor. Integration Services.

1 - HOTSPOT - You have an Azure subscription that contains a virtual machine scale set. The scale set contains four instances that have the following configurations: ✑ Operating system: Windows Server 2016 ✑ Size: Standard_D1_v2 You run the get-azvmss cmdlet as shown in the following exhibit: 2 -Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point. Hot Area: When an administrator changes the virtual machine size, the size be changed on up to [answer choice] virtual machines simultaneously. When a new build of the Windows Server 2016 images is released, the new build will be deployed to up to [answer choice] virtual machines simultaneously.

You have an Azure subscription named Subscription1 that is used by several departments at your company. Subscription1 contains the resources in the following table: Another administrator deploys a virtual machine named VM1 and an Azure Storage account named storage2 by using a single Azure Resource Manager template. You need to view the template used for the deployment. From which blade can you view the template that was used for the deployment?. VM1. RG1. storage2. container1.

You have an Azure web app named App1. App1 has the deployment slots shown in the following table: In webapp1-test, you test several changes to App1. You back up App1. You swap webapp1-test for webapp1-prod and discover that App1 is experiencing performance issues. You need to revert to the previous version of App1 as quickly as possible. What should you do?. Redeploy App1. Swap the slots. Clone App1. Restore the backup of App1.

HOTSPOT - You have an Azure subscription named Subscription1. Subscription1 contains two Azure virtual machines VM1 and VM2. VM1 and VM2 run Windows Server 2016. VM1 is backed up daily by Azure Backup without using the Azure Backup agent. VM1 is affected by ransomware that encrypts data. You need to restore the latest backup of VM1. To which location can you restore the backup? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: You can perform a file recovery of VM1 to. You can restore VM1 to.

You plan to back up an Azure virtual machine named VM1. You discover that the Backup Pre-Check status displays a status of Warning. What is a possible cause of the Warning status?. VM1 is stopped. VM1 does not have the latest version of the Azure VM Agent (WaAppAgent.exe) installed. VM1 has an unmanaged disk. A Recovery Services vault is unavailable.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json. You receive a notification that VM1 will be affected by maintenance. You need to move VM1 to a different host immediately. Solution: From the Overview blade, you move the virtual machine to a different resource group. Does this meet the goal?. Yes. No.

HOTSPOT - You have an Azure subscription. You plan to use Azure Resource Manager templates to deploy 50 Azure virtual machines that will be part of the same availability set. You need to ensure that as many virtual machines as possible are available if the fabric fails or during servicing. How should you configure the template? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: "platforeFaultDomainCount":. "platformUpdateDomainCount":.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure virtual machine named VM1 that runs Windows Server 2016. You need to create an alert in Azure when more than two error events are logged to the System event log on VM1 within an hour. Solution: You create an Azure Log Analytics workspace and configure the Agent configuration settings. You install the Microsoft Monitoring Agent on VM1. You create an alert in Azure Monitor and specify the Log Analytics workspace as the source. Does this meet the goal?. Yes. No.

HOTSPOT - You have an Azure subscription. You deploy a virtual machine scale set that is configured as shown in the following exhibit. At 9:00 AM, the scale set alerts and CPU utilization is 90 percent for 15 minutes.How many virtual machine instance will be running at 9:15 AM?. At 10:00 AM, the scale set has five virtual machine instances running and CPU utilization falls to less than 15 percent for 60 minutes. How many virtual machine instances will be running at 11:00 AM?.

You have web apps in the West US, Central US and East US Azure regions. You have the App Service plans shown in the following table. You plan to create an additional App Service plan named ASP5 that will use the Linux operating system. You need to identify in which of the currently used locations you can deploy ASP5. What should you recommend?. West US, Central US, or East US. Central US only. East US only. West US only.

You plan to deploy several Azure virtual machines that will run Windows Server 2019 in a virtual machine scale set by using an Azure Resource Manager template. You need to ensure that NGINX is available on all the virtual machines after they are deployed. What should you use?. the New-AzConfigurationAssignment cmdlet. a Desired State Configuration (DSC) extension. Azure Active Directory (Azure AD) Application Proxy. Azure Application Insights.

1 HOTSPOT - You have an Azure subscription that contains the resources shown in the following table 2 -In Azure Cloud Shell, you need to create a virtual machine by using an Azure Resource Manager (ARM) template. How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: New-AzVN. New-AzResource. New-AztemplateSpec. New-AzResourceGroupDeplyment. -Tag Tag1 ´. -ResourceGroupName RG1 ´. -GroupName ManagementGroups1 ´. -Subscription 9c8bc1cf-7655-b3ea-qa8ee101d8f75.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You deploy an Azure Kubernetes Service (AKS) cluster named AKS1. You need to deploy a YAML file to AKS1. Solution: From Azure Cloud Shell, you run az aks. Does this meet the goal?. Yes. No.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure virtual machine named VM1 that runs Windows Server 2016. You need to create an alert in Azure when more than two error events are logged to the System event log on VM1 within an hour. Solution: You create an Azure Log Analytics workspace and configure the data settings. You add the Microsoft Monitoring Agent VM extension to VM1. You create an alert in Azure Monitor and specify the Log Analytics workspace as the source. Does this meet the goal?. Yes. No.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure virtual machine named VM1 that runs Windows Server 2016. You need to create an alert in Azure when more than two error events are logged to the System event log on VM1 within an hour. Solution: You create an Azure Log Analytics workspace and configure the data settings. You install the Microsoft Monitoring Agent on VM1. You create an alert in Azure Monitor and specify the Log Analytics workspace as the source. Does this meet the goal?. Yes. No.

1 - You have an Azure subscription that contains the resources shown in the following table. 2- All virtual machines run Windows Server 2016. On VM1, you back up a folder named Folder1 as shown in the following exhibit. You plan to restore the backup to a different virtual machine. You need to restore the backup to VM2. What should you do first?. From VM1, install the Windows Server Backup feature. From VM2, install the Microsoft Azure Recovery Services Agent. From VM1, install the Microsoft Azure Recovery Services Agent. From VM2, install the Windows Server Backup feature.

HOTSPOT - You have an Azure subscription. You need to use an Azure Resource Manager (ARM) template to create a virtual machine that will have multiple data disks. How should you complete the template? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: "storageProfile" { ... "disckSizeGB": 1023, "lun" :.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Subscription1 that contains the resources shown in the following table. Subscription1 also includes a virtual network named VNET2. VM1 connects to a virtual network named VNET2 by using a network interface named NIC1. You need to create a new network interface named NIC2 for VM1. Solution: You create NIC2 in RG1 and West US. Does this meet the goal?. Yes. No.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Subscription1 that contains the resources shown in the following table. Subscription1 also includes a virtual network named VNET2. VM1 connects to a virtual network named VNET2 by using a network interface named NIC1. You need to create a new network interface named NIC2 for VM1. Solution: You create NIC2 in RG2 and Central US. Does this meet the goal?. Yes. No.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Subscription1 that contains the resources shown in the following table. Subscription1 also includes a virtual network named VNET2. VM1 connects to a virtual network named VNET2 by using a network interface named NIC1. You need to create a new network interface named NIC2 for VM1. Solution: You create NIC2 in RG2 and West US. Does this meet the goal?. Yes. No.