TEST_7

Refer to the exhibits. The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit B) for Facebook. Users are given access to the Facebook web application. They can play video content hosted on Facebook, but they are unable to leave reactions on videos or other types of posts. Which part of the policy configuration must you change to resolve the issue?. Get the additional application signatures required to add to the security policy. Force access to Facebook using the HTTP service. Add Facebook in the URL category in the security policy. Make the SSL inspection a deep content inspection.

Refer to the exhibit. The exhibit shows a diagram of a FortiGate device connected to the network and the firewall policy and IP pool configuration on the FortiGate device. Which two actions does FortiGate take on internet traffic sourced from the subscribers(Choose two.)?. FortiGate generates a system event log for every port block allocation made per user. FortiGate allocates port blocks on a first-come,first-served basis. FortiGate allocates port blocks per user, based on the configured range of internal IP addresses. FortiGate allocates 128 port blocks per user.

What are two benefits of flow-based inspection compared to proxy-based inspection(Choose two.)?. FortiGate performs a more exhaustive inspection on traffc. FortiGate allocates two sessions per connection. FortiGate uses fewer resources. FortiGate adds less latency to traffic.

Which statement correctly describes the use of reliable logging on FortiGate?. Reliable logging is enabled by default in all configuration scenarios. Reliable logging can be configured only using the CLI. Reliable logging is required to encrypt the transmission of logs. Reliable logging prevents the loss of logs when the local disk is full.

Which two statements explain antivirus scanning modes(Choose two.)?. In proxy-based inspection mode, files bigger than the buffer size are scanned. In flow-based inspection mode, files bigger than the buffer size are scanned. In flow-based inspection mode, FortiGate buffers the file, but also simultaneously transmits it to the client. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it to the client.

An administrator has configured the following settings: config system settings set ses-denied-traffic enable end config system global set block-session-timer 30 end What are the two results of this configuration(Choose two.)?. Denied users are blocked for 30 minutes. Device detection on all interfaces is enforced for 30 minutes. A session for denied traffic is created. The number of logs generated by denied traffic is reduced.

An administrator does not want to report the login events of service accounts to FortiGate. Which setting on the collector agent is required to achieve this?. Add the support of NTLM authentication. Add user accounts to the FortiGate group filter. Add user accounts to Active Directory (AD). Add user accounts to the Ignore User List.

Refer to the exhibits. The exhibits show a firewall policy (Exhibit A) and an antivirus profile (Exhibit B). Why is the user unable to receive a block replacement message when downloading an infected ¦le for the ¦rst time?. Flow-based inspection is used, which resets the last packet to the user. The volume of traffic being inspected is too high for this model of FortiGate. The intrusion prevention security profile must be enabled when using flow-based inspection mode. The firewall policy performs a full content inspection on the file.

Which two statements explain antivirus scanning modes(Choose two.)?. In flow-based inspection mode, files bigger than the buffer size are scanned. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it to the client. In proxy-based inspection mode, files bigger than the buffer size are scanned. In flow-based inspection mode, FortiGate buffers the file, but also simultaneously transmits it to the client.

Refer to the exhibit. The exhibit shows a diagram of a FortiGate device connected to the network, the firewall policy and VIP configuration on the FortiGate device, and the routing table on the ISP router. When the administrator tries to access the web server public address (203.0.113.2) from the internet, the connection times out. At the same time, the administrator runs a sniffer on FortiGate to capture incoming web traffic to the server and does not see any output. Based on the information shown in the exhibit, what configuration change must the administrator make to fix the connectivity issue?. In the VIP configuration, enable arp-reply. Configure a loopback interface with address 203.0.113.2/32. In the firewall policy configuration, enable match-vip. Enable port forwarding on the server to map the external service port to the internal service port.

Refer to the exhibits. The exhibits show a network diagram and firewall configurations. An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2. Remote-User1 must be able to access the Webserver. Remote-User2 must not be able to access the Webserver. In this scenario, which two changes can the administrator make to deny Webserver access for Remote-User2(Choose two.)?. Set the Destination address as Webserver in the Deny policy. Set the Destination address as Deny_IP in the Allow_access policy. Disable match-vip in the Deny policy. Enable match-vip in the Deny policy.

What is the limitation of using a URL list and application control on the same Firewall policy, in NGFW policy-based mode?. It limits the scanning of application traffic to the application category only. It limits the scanning of application traffic to use parent signatures only. It limits the scanning of application traffic to the browser-based technology category only. It limits the scanning of application traffic to the DNS protocol only.

Which statement is correct regarding the use of application control for inspecting web applications?. Application control does not display a replacement message for a blocked web application. Application control does not require SSL inspection to identify web applications. Application control can identify child and parent applications, and perform different actions on them. Application control signatures are organized in a non-hierarchical structure.

Refer to the exhibit showing a debug flow output. What two conclusions can you make from the debug §ow output(Choose two.)?. A new traffic session was created. The default route is required to receive a reply. A firewall policy allowed the connection. The debug flow is for ICMP traffic.

An administrator has configured a strict RPF check on FortiGate. How does strict RPF check work?. Strict RPF checks the best route back to the source using the incoming interface. Strict RPF checks only for the existence of at least one active route back to the source using the incoming interface. Strict RPF allows packets back to sources with all active routes. Strict RPF check is run on the ¦rst sent and reply packet of any new session.

On FortiGate, which type of logs record information about traffic directly to and from the FortiGate management IP addresses?. System event logs. Forward traffic logs. Security logs. Local traffic logs.

Which statement about video filtering on FortiGate is true?. Full SSL inspection is not required. Otis available only on a proxy-based firewall policy. It does not require a separate FortiGuard license. Video filtering FortiGuard categories are based on web filter FortiGuard categories.

FortiGuard categories can be overridden and defined in different categories. To create a web rating override for the example.com home page, the override must be configured using a specific syntax. Which two syntaxes are correct to configure a web rating override for the home page(Choose two.)?. example.com. www.example.com. www.example.com:443. www.example.com/index.html.

Refer to the exhibit. Review the intrusion prevention system (IPS) profile signature settings shown in the exhibit. What do you conclude when adding the FTP.Login.Failed signature to the IPS sensor profile?. The signature setting includes a group of other signatures. The signature setting uses a custom rating threshold. Traffic matching the signature will be silently dropped and logged. Traffic matching the signature will be allowed and logged.

What are two functions of ZTNA(Choose two.)?. ZTNA manages access through the client only. ZTNA manages access for remote users only. ZTNA provides role-based access. ZTNA provides a security posture check.

FortiGate is operating in NAT mode and is configured with two virtual LAN (VLAN) subinterfaces added to the same physical interface. In this scenario, what are two requirements for the VLAN ID(Choose two.)?. The two VLAN subinterfaces must have different VLAN IDs. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in the same subnet. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in different subnets. The two VLAN subinterfaces can have the same VLAN ID, only if they belong to different VDOMs.

By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers. Which CLI command causes FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?. set fortiguard-anycast disable. set web filter-cache disable. set protocol tcp. set web filter-force-off disable.

Refer to the exhibit. An administrator is running a sniffer command as shown in the exhibit. Which three pieces of information are included in the sniffer output(Choose three)?. IP header. Interface name. Ethernet header. Application header. Packet payload.

Which statement correctly describes NetAPI polling mode for the FSSO collector agent?. The collector agent uses a Windows API to query DCs for user logins. NetAPI polling can increase bandwidth usage in large networks. The collector agent must search Windows application event logs. The NetSessionEnum function is used to track user logouts.

An administrator wants to configure dead peer detection (DPD) on IPsec VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when no traffic is observed in the tunnel. Which DPD mode on FortiGate will meet this requirement?. On Demand. On Idle. Disabled. Enabled.

Which two configuration settings are synchronized when FortiGate devices are in an active-active HA cluster(Choose two.)?. DNS. FortiGate hostname. NTP. FortiGuard web filter cache.

Refer to the exhibits. Exhibit A shows a topology for a FortiGate HA cluster that performs proxy-based inspection on traffic. Exhibit B shows the HA configuration and the partial output of the get system ha status command. Based on the exhibits, which two statements about the traffic passing through the cluster are true(Choose two.)?. The cluster can load balance ICMP connections to the secondary. The traffic sourced from the client and destined to the server is sent to FGT-1. For non-load balanced connections, packets forwarded by the cluster to the server contain the virtual MAC address of port2 as source. For load balanced connections, the primary encapsulates TCP SYN packets before forwarding them to the secondary.

Which three statements explain a flow-based antivirus profile(Choose three)?. Flow-based inspection optimizes performance compared to proxy-based inspection. Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection. The IPS engine handles the process as a standalone. FortiGate buffers the whole file but transmits to the client at the same time. If a virus is detected, the last packet is delivered to the client.

A network administrator enabled antivirus and selected an SSL inspection profile on a firewall policy. When downloading an EICAR test file through HTTP, FortiGate detects the virus and blocks the file. When downloading the same file through HTTPS, FortiGate does not detect the virus and does not block the file, allowing it to be downloaded. The administrator confirms that the traffic matches the configured firewall policy. What are two reasons for the failed virus detection by FortiGate(Choose two.)?. The selected SSL inspection profile has certificate inspection enabled. The browser does not trust the FortiGate self-signed CA certifcate. The website is exempted from SSL inspection. The EICAR test file exceeds the protocol options oversize limit.

Which timeout setting can be responsible for deleting SSL VPN associated sessions?. SSL VPN dtls-hello-timeout. SSL VPN http-request-body-timeout. SSL PN login-timeout. SSL VPN idle-timeout.

Which two settings are required for SSL VPN to function between two FortiGate devices(Choose two.)?. The client FortiGate requires a client certificate signed by the CA on the server FortiGate. The client FortiGate requires a manually added route to remote subnets. The client FortiGate requires the SSL VPN tunnel interface type to connect SSL VPN. The server FortiGate requires a CA certificate to verify the client FortiGate certi¦cate.

Which engine handles application control traffic on the next-generation firewall (NGFW) FortiGate?. Turbo engine. Application control engine. Antivirus engine. Intrusion prevention system engine.

An administrator wants to configure timeouts for users. Regardless of the user's behavior, the timer should start as soon as the user authenticates and expire after the configured value. Which timeout option should the administrator configure on FortiGate?. soft-timeout. auth-on-demand. idle-timeout. new-session. hard-timeout.

Which two attributes are required on a certificate so it can be used as a CA certificate on SSL inspection(Choose two)?. The CA extension must be set to TRUE. The issuer must be a public CA. The common name on the subject field must use a wildcard name. The keyUsage extension must be set to keyCertSign.

An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24. Which subnet must the administrator configure for the local quick mode selector for site B?. 192.168.2.0/24. 192.168.0.0/8. 192.168.3.0/24. 192.168.1.0/24.

Refer to the exhibits. An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW). What must the administrator do to synchronize the address object?. Change the csf setting on both devices to set downstream-access enable. Change the csf setting on ISFW (downstream) to set authorization-request-type certificate. Change the csf setting on Local-FortiGate (root) to set fabric-object-unification default. Change the csf setting on ISFW (downstream) to set configuration-sync local.

Refer to exhibit. An administrator configured the web filtering profile shown in the exhibit to block access to all social networking sites except Twitter. However, when users try to access twitter.com, they are redirected to a FortiGuard web filtering block page. Based on the exhibit, which configuration change can the administrator make to allow Twitter while blocking all other social networking sites?. On the Static URL Filter configuration, set Type to Simple. On the Static URL Filter configuration, set Action to Exempt. On the Static URL Filter configuration, set Action to Monitor. On the FortiGuard Category Based Filter configuration, set Action to Warning for Social Networking.

Which two statements are true about the FGCP protocol(Choose two.)?. FGCP runs only over the heartbeat links. FGCP is used to discover FortiGate devices in different HA groups. FGCP is not used when FortiGate is in transparent mode. FGCP elects the primary FortiGate device.

Which three criteria can FortiGate use to look for a matching firewall policy to process traffic(Choose three)?. Services defined in the firewall policy. Destination defined as Internet Services in the firewall policy. Highest to lowest priority defined in the firewall policy. Lowest to highest policy ID number. Source defined as Internet Services in the firewall policy.

Refer to the exhibits. The exhibits contain a network diagram, and virtual IP, IP pool, and firewall policies configuration information. The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port3) interface has the IP address 10.0.1.254/24. The first firewall policy has NAT enabled using IP pool. The second firewall policy is configured with a VIP as the destination address Which IP address will be used to source NAT (SNAT) the internet traffic coming from a workstation with the IP address 10.0.1.10?. 10.200.1.10. 10.200.1.1. 10.200.1.100. 10.0.1.254.

A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes. All traffic must be routed through the primary tunnel when both tunnels are up. The secondary tunnel must be used only if the primary tunnel goes down. In addition, FortiGate should be able to detect a dead tunnel to speed up tunnel failover. Which two key configuration changes must the administrator make on FortiGate to meet the requirements(Choose two.)?. Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static route for the secondary tunnel. Enable Dead Peer Detection. Configure a higher distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel.

Refer to the exhibits. The exhibits show the firewall policies and the objects used in the Firewall policies. The administrator is using the Policy Lookup feature and has entered the search criteria shown in the exhibit Which policy will be highlighted, based on the input criteria?. Policy with ID 5. Policies with ID 2 and 3. Policy with ID 4. Policy with ID 4.

Which two protocols are used to enable administrator access of a FortiGate device(Choose two.)?. HTTPS. FTM. FortiTelemetry. SSH.

Refer to the exhibit. Examine the intrusion prevention system (IPS) diagnostic command shown in the exhibit. If option 5 is used with the IPS diagnostic command and the outcome is a decrease in the CPU usage, what is the correct conclusion?. The IPS engine will continue to run in a normal state. The IPS engine is blocking all traffic. The IPS engine is unable to prevent an intrusion attack. The IPS engine is inspecting a high volume of traffic.

What are two features of FortiGate FSSO agentless polling mode(Choose two.)?. FortiGate uses the SMB protocol to read the event viewer logs from the DCs. FortiGate directs the collector agent to use a remote LDAP server.. FortiGate does not support workstation check. FortiGate uses the AD server as the collector agent.

Refer to the exhibit. Based on the routing database shown in the exhibit, which two conclusions can you make about the routes(Choose two.)?. There will be eight routes active in the routing table. The ports default route has the highest distance. The port1 and port2 default routes are active in the routing table. The port3 default route has the lowest metric.

Which two statements about the Security Fabric rating are true(Choose two.)?. The Security Fabric rating is a free service that comes bundled with all FortiGate devices. It provides executive summaries of the four largest areas of security focus. Many of the security issues can be fixed immediately by clicking Apply where available. The Security Fabric rating must be run on the root FortiGate device in the Security Fabric.

An administrator configures outgoing interface any in a firewall policy. What is the result of the policy list view?. Search option is disabled. Interface Pair view is disabled. Policy lookup is disabled. By Sequence view is disabled.

Refer to the exhibit. Based on the ZTNA tag, the security posture of the remote endpoint has changed. What will happen to endpoint active ZTNA sessions?. They will be re-evaluated to match the security policy. They will be re-evaluated to match the endpoint policy. They will be re-evaluated to match the ZTNA policy. They will be re-evaluated to match the firewall policy.

A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service. Which type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?. Pre-shared key. Dynamic DNS. Static IP address. Dialup user.

Refer to the exhibits. Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the default configuration of high memory usage thresholds. Based on the system performance output, which two results are correct(Choose two.)?. Administrators cannot change the configuration. Administrators can access FortiGate only through the console port. FortiGate has entered conserve mode. FortiGate will start sending all files to FortiSandbox for inspection.

Refer to the exhibit Based on the raw log, what can you conclude from the output(Choose two.)?. Traffic belongs to the root VDOM. Log severity is set to error on FortiGate. Traffic is blocked because Action is set to DENY in the firewall policy. This is a security log.

Which three methods are used by the collector agent for AD polling(Choose three)?. FSSO REST API. WinSecLog. FortiGate polling. WMI. NetAPI.

Which statement is correct regarding the security fabric?. FortiGate devices must be operating in NAT mode. FortiManager is one of the required member devices. FortiGate Cloud cannot be used for logging purposes. A minimum of two Fortinet devices is required.

What are two features of the NGFW policy-based mode(Choose two.)?. NGFW policy-based mode can only be applied globally and not on individual VDOMs. NGFW policy-based mode does not require the use of central source NAT policy. NGFW policy-based mode policies support only flow inspection. NGFW policy-based mode supports creating applications and web filtering categories directly in a firewall policy.

Refer to the exhibit. A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up. Based on the phase 2 configuration shown in the exhibit, which configuration change will bring phase 2 up?. On HQ-FortiGate, enable Auto-negotiate. On HQ-FortiGate, set Encryption to AES256. On HQ-FortiGate, enable Diffie-Hellman Group 2. On Remote-FortiGate, set Seconds to 43200.

Refer to the exhibit Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?. Read/Write permission for Firewall. Custom permission for Network. CLI diagnostics commands permission. Read/Write permission for Log & Report.

Which statement describes a characteristic of automation stitches?. They can run multiple actions simultaneously. They can be created on any device in the fabric. They can be run only on devices in the Security Fabric. They can have one or more triggers.

What is the primary FortiGate election process when the HA override setting is disabled?. Connected monitored ports > System uptime > Priority > FortiGate serial number . Connected monitored ports > Priority > System uptime > FortiGate serial number . Connected monitored ports > Priority > HA uptime > FortiGate serial number. Connected monitored ports > HA uptime > Priority > FortiGate serial number.

Refer to the exhibit. An administrator added a configuration for a new RADIUS server. While configuring, the administrator selected the Include in every user group option What is the impact of using the Include in every user group option in a RADIUS configuration?. This option places the RADIUS server, and all users who can authenticate against that server, into every FortiGate user group. This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group. This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate. This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator.