EWM TEST

"Which production integration scenario is supported by inventory-managed storage locations?". Delivery-based production supply. Advanced production integration. Both A and B. None of the above.

Which of the following are Kanban parts?. Pick parts. Release order parts. Crate parts. None of the above.

"Which staging method is defined in the control cycle for advanced integra- tion?". Crate parts. Release order parts. EWM staging. Pick parts.

"What are the different master data objects that a PSA can be assigned to? (There are three correct answers.)". Material master. BOM. Routing. Work center. Plant.

With delivery-based production integration, which system initiates production consumption?. SAP S/4HANA. EWM. SAP Advanced Planning and Optimization. Both A and B.

Which is the correct sequence of delivery type determination?. "Delivery type assigned to plant and storage location, plant, and no plantspecific entry". "Delivery type assigned to plant, plant, and storage location, and no plantspecific entry". "Delivery type with no plant specific entry, assigned to plant and storage location, and assigned to plant". None of the above.

"In a delivery-based production supply process, which document triggers the reversal of consumption in SAP S/4HANA?". Outbound delivery. Posting change document. Inbound delivery. None of the above.

"If a component is shared across production orders, what is the optimal staging method to use?". Single order staging. Cross-order staging. Crate parts staging. All of the above.

"With advanced production integration, how are staging requests communicated to EWM?". Through an outbound delivery distributed from SAP S/4HANA to EWM. Through a PMR. Through an inbound delivery distributed from SAP S/4HANA to EWM. Through a picking list generated in SAP S/4HANA.

Without a production order, which of the following parts can be staged?. Single order parts. Crate parts. Cross-order parts. Release order parts.

How is a PSA created in SAP S/4HANA and EWM?. Manually in both SAP S/4HANA and EWM. PSA is only required in SAP S/4HANA. Manually created in both SAP S/4HANA and EWM and mapping done. between them. Manually created in SAP S/4HANA and automatically updated in EWM.

"While using delivery-based production integration, which staging methods can be assigned in a control cycle? (There are two correct answers.)". EWM staging. Release order parts. Pick parts. No staging.

"When a supplying storage location and receiving storage locations are connected to different warehouses, which documents are created for deliverybased production integration?". Posting change documents in both warehouses. "Outbound delivery in the supplying warehouse and posting change document in the receiving warehouse". "Outbound delivery in the supplying warehouse and inbound delivery in the receiving warehouse". "Inbound delivery in the supplying warehouse and outbound delivery in the receiving warehouse".

"To determine how materials are staged from EWM, which object must be defined?". Bill of materials (BOM). Control cycle. Routing. Work center.

"When supplying and receiving storage locations are connected to the same warehouse, which document is created for material staging with deliverybased production integration?". Outbound delivery. Warehouse order. Warehouse task. Inbound delivery.

"When a goods receipt is posted for a production order, which document communicates to EWM?". Material document. Outbound delivery. Warehouse order. Inbound delivery.

When is a PMR closed?. After a warehouse order confirmation for single order staging. After a warehouse order confirmation for cross-order staging. After a production order is technically completed. After a production order is fully confirmed.

"Which of the following components can be used to map an automated warehouse to the MFS? (There are two correct answers.)". ALE. IDoc. Communication channel. Communication point.

"How are HUs identified automatically in an automated warehouse with the MFS?". Using HU labels. Using scanners. Using RF devices. Using HU dimensions.

VAS order contains which of the following components?. VAS order header. Items. VAS activities. All the above.

Which component is a prerequisite for VAS orders?. Packaging specification. Auxiliary products. BOM. Scheduling profile.

"When a VAS order is created for reverse kitting, which documents are created automatically? (There are two correct answers.)". Production order. Inbound delivery. Outbound delivery. Production material request (PMR).

"What options are available to produce kits for stock? (There are two correct answers.)". With a production order. With a sales order. During picking. With a VAS order.

"When a kit-to-order is produced without a VAS order, where can you maintain kitting instructions?". Sales order. Outbound delivery. Warehouse request. None of the above.

"In a kit-to-stock process with production orders, why is the production order status updated with LFAN? (There are two correct answers.)". Outbound delivery is created. Order traveler form is printed. Inbound delivery is created. Production material request (PMR) is created.

A VAS order type is mandatory to create a manual VAS order. True or false?. True. False.

"In a kit-to-order during picking process, what is the standard movement type used to post the receipt of the kit?". 101. 521. 561. 261.

"A VAS order provides which of the following functions? (There are two correct answers.)". Actual costs to complete the VAS order. Physical inventory count. Time required to complete the VAS order. Consumption of auxiliary products.

For a VAS order, where is the BOM maintained?. In SAP S/4HANA. In SAP S/4HANA and EWM. In EWM. Packaging instruction.

"What are the different kitting processes available in EWM? (There are two correct answers.)". Kit rebuilding. Reverse kitting. Engineer to order. Kit-to-stock.

"If the kitting process should be triggered through a production order, where should kit-to-stock in EWM be enabled?". Order type dependent parameters. Confirmation parameters. Scheduling profile. Availability checking rule.

"A VAS order is created with reference to which of the following? (There are two correct answers.)". Picking list. Packaging specification. Outbound delivery order. Production material request (PMR).

"Labor management is activated at what levels in the warehouse? (There are two correct answers.)". Internal process step. Warehouse. Storage bin. Activity.

Which of the following are labor management functionalities?. Indirect labor activities. Travel distance calculation. Workload planning and execution. Engineered labor standards (ELS). All of the above.

"Which of the following types of labor activities are tracked in EWM labor man- agement for capturing the time taken to perform these activities?". Ad hoc labor activities. Indirect and direct labor activities. Indirect and unscheduled labor activities. Direct and scheduled labor activities.

"Which of the following is an example of an indirect labor task? (There are two correct answers.)". Putaway. Housekeeping. Meeting. Picking.

Which role must be created for the business partner to activate labor management?. Vendor purchasing. Customer. Processor. Vendor general.

"Which of the following parameters are used to define ELS? (There are two correct answers.)". Travel distance calculation. Internal process steps. External process steps. Labor activities.

"During which processes is travel distance calculated? (There are two correct answers.)". Warehouse order creation. Post goods issue. Warehouse order confirmation. Upon wave release.

When does preprocessing trigger workload planning?. Before a warehouse order or warehouse task is created. After warehouse order or warehouse task is created. During warehouse order or warehouse task creation. None of the above.

Which internal process step is used for indirect labor activity?. PUT. INVE. INDL. PICK.

"Which of the following travel distance calculation methods is used to calculate direct distance by EWM? (There are two correct answers.)". Euclidean. Critical path. Manhattan. Storage type-specific network.

"The warehouse operator performs the picking and notes a difference between the system quantity and the physical quantity in the storage bin. Which of the following can the warehouse operator enter?". A warehouse process type to determine the difference bin. An exception code to determine the follow-up function. A cost center or project code to which the difference should be charged. All of the above.

"During the picking process using radio frequency (RF) transactions, in case of inconsistencies, which standard functions can be executed in the background when you enter an exception code? (There are three correct answers.)". Cancel warehouse order. Adjust delivery document. Direct picking to another bin. Create bin replenishment. Generate workflow process.

"When you create a customer exception code, which can be triggered by the system or entered by a user in case of unexpected situations. What assignment can you make for the custom exception code?". Workflow as follow-up action. Follow-on function for status management. Internal exception code. Business context.

"When you create a custom exception code, you assign one or more business contexts. What is determined by assigning business contexts to exception codes?". The business context that is assigned the internal exception code. The user groups. The work environment. The process for which the exception code can be used.

"You want to set up a pick denial process in EWM. What configuration does not need to be performed?". "Define external customer-specific exception codes or use SAP-delivered external exception codes and assign them to the internal, predefined exception codes". Enable the workflow process. Configure and activate pick denial at the warehouse level. Directly use an internal exception code for the pick denial process.

You plan to set up exception processes for the new warehouse you’ve configured. For which activities can you configure the exceptions? (There are three correct answers.). Picking. Putaway. Goods receipt. MFS. Production.

"To address the discrepancies between sending and receiving plants, which exception codes are used? (There are two correct answers.)". DIFE. DIFC. BIDP. BIDF.

"When the warehouse picker went to the storage bin as proposed by the ware- house tasks, they didn’t find any stock for the product. In this situation, which exception code is used?". BIDP. BIDF. CHBD. BIDU.

"What are allowed batch uniqueness definitions in SAP? (There are three correct answers.)". Material level. Plant level. Client level for material. Storage location level.

"If batch management is active at the material level, the plant level is automatically activated in the material master. True or false?". True. False.

Which classification type is used to classify batches?. Class type 001. Class type 023. Class type 200. Class type 300.

"Documentary batch picking can be restricted through batch status. True or false?". True. False.

"Which batch characteristics are associated with EWM stock-level attributes? (There are two correct answers.)". Batch last goods receipt date. Country of origin. Shelf-life expiration date. Revision level.

"What options are available for serialization integration between SAP S/4HANA and EWM? (There are two correct answers.)". Harmonized serialization. Nonharmonized serialization. Decentralized serialization. None of the above.

"What are the different serial number requirements defined in EWM? (There are three correct answers.)". For document item. Warehouse number level. Material level. Stock or inventory management level.

"It’s mandatory to assign serial numbers at goods issue when the serial requirement is defined for the document item. True or false?". True. False.

"Which serial requirement in EWM provides the serialized product tracking at the storage bin level?". For document item. Warehouse number level. Stock or inventory management level. None of the above.

"It’s mandatory to replace provisional serial numbers generated by EWM. True or false?". True. False.

Where can a batch be created?. Batches can be created in SAP S/4HANA and EWM. Batches can only be created in SAP S/4HANA. Batches can only be created in EWM. None of the above.

"During the inbound delivery of purchased products, when will a batch be created when EWM is implemented?". Before the inbound delivery is distributed to EWM. When the goods receipt is posted in EWM. When goods receipt is posted in SAP S/4HANA. Before the inbound delivery is created in SAP S/4HANA.

"What are the possible levels where batch management can be activated in SAP S/4HANA? (There are two correct answers.)". Warehouse number level. Material level. Plant level. Storage location level.

"Which IDoc message type is used to distribute batch information between SAP S/4HANA and EWM?". MATMAS. BOMMAT. BATMAS. ECMMAS.

"When minimum remaining shelf life is maintained without total shelf-life days, it’s mandatory to enter the shelf-life expiration date during goods receipt. True or false?". True. False.

"We use smart forms for PPF processing types for further processing in EWM. Which of the processing types are used? (There are three correct answers.)". Handling exceptions. Print. Fax. Mail. Workflow.

"Which PPF action is not triggered during delivery processing or EWM document processing?". Printing. Business add-in (BAdI). Workflows. Goods issue posting.

"You configure actions only at the header level of a delivery document. True or false?". True. False.

"Which of the following can you set up in condition configurations? (There are three correct answers.)". Time of processing. Schedule condition. Start condition. Printing. End condition.

"The PPF has many applications. Which applications do we use in EWM? (There are three correct answers.)". /SCDL/DELIVERY. /SCWM/SHP_RCV. /SCMTMS/TRANSPORTATION. /SCWM/WME.

"The warehouse management engine (/SCWM/WME) application is used for which of the following printed documents? (There are four correct answers.)". Warehouse orders. Handling units. Value-added services (VAS) orders. Physical inventory documents. Warehouse monitor reports.

"You want to set up new PPF actions for new requirement. To do so, you need to understand which of the following components for PPF actions? (There are four correct answers.)". Action lists. Action profiles. Action definitions. Action items. Action merges.

"In the storage control process, you configure storage groups. How can you use the storage group in EWM? (There are two correct answers.)". Assign the storage group to multiple storage bins. "Use the storage group to define a logical or physical breakdown of a storage type". Assign the storage group as an intermediate storage type or storage bin. Use the storage group in POSC and LOSC.

"In EWM, we use storage controls to set up complex processes based on physical movement and the structure of the warehouse. What are the methods of storage control in EWM? (There are two correct answers.)". Layout-oriented. HU-oriented. Process-oriented. Warehouse-oriented.

"You’re asked to set up POSC in the warehouse. In which case would that be possible?". Unloading before counting. Staging before loading. VAS before putaway. None of the above.

"When you set up an external step in POSC, you can select rule-based determi- nation for which of the following?". Storage type. Destination storage bin. Warehouse process type. All of the above.

"You have a complex process in the warehouse for receiving and shipping, which includes multiple physical movements and resource changes. What do you configure to achieve the complex processes?". Storage process control. Outbound delivery. Inbound delivery. Putaway.

"When you set up complex inbound processes in EWM, which of the following process steps can you choose for POSC? (There are three correct answers.)". VAS. Staging. Deconsolidation. Unloading. Picking.

"In POSC, you create external process steps for the processes performed in the warehouse. What do you assign the external process step to?". Packaging specification. Internal process step. Storage group. All of the above.

"If you’re planning to set up POSC in the outbound process, which of the following are possible process steps? (There are four correct answers.)". VAS. Loading. Picking. Packing. Deconsolidation.

"When you configure POSC with LOSC, EWM always determines POSC first. True or false?". True. False.

"When you set up a complex putaway process using POSC, which of the following process steps are possible in the inbound process?". Deconsolidation. Quality inspection. Unloading. VAS. All of the above.

"In LOSC, the system creates two warehouse tasks: (1) to move HUs from the source bin to the interim storage bin, and (2) to move HUs from interim storage bins to the final destination bin. Immediately after creation, what is the status of the first and second warehouse task?". Open and open. Open and waiting. Waiting and open. Waiting and waiting.

"In EWM, you configure storage control for POSC. To determine the storage control, which objects do you assign to the storage control? (There are two correct answers.)". Warehouse process type. Storage type. Storage group. Warehouse order creation rule.

"In POSC, you need to create external process steps for warehouse processes to be performed. Which object in the external process step is assigned?". Work center. HU type. Storage group. None of the above.

"You’re using POSC for inbound process steps. Using HU warehouse tasks is a requirement for storage control. Which process step can have product warehouse tasks?". First unloading process step. All the process steps. First unloading and final putaway process steps. Final putaway process steps.

"Your warehouse performs physical inventory for products and HUs as and when needed. Which of the following physical inventory methods do you use? (There are two correct answers.)". Storage bin-specific. Product-specific. HU-specific. Warehouse-specific.

"You plan to set up physical inventory for the new warehouse you’ve created in EWM. Which physical inventory procedure do you need to be aware of? (There are three correct answers.)". Cycle counting. RF-directed counting. Paper-driven counting. Periodic. Continuous.

"A warehouse worker performing a counting process in the warehouse has found a difference while counting. The warehouse worker should enter which of the following?". A warehouse process type. An exception code. A work breakdown structure (WBS) code. All of the above.

What are the two forms of counting?. Internal and external. Cycle and periodic. Implicit and explicit. Direct and indirect.

"You’re setting up the physical inventory process in your warehouse. The business requirement is to set up an approval process for each level to approve the variance. If you’re using the difference analyzer, which parameters control the tolerance group?". Percentage quantity-based tolerance. Value-based tolerance. Both percentage quantity-based and value-based tolerance. None of the above.

"You can set up storage bin-specific physical inventory or product-specific physical inventory in EWM. If you need to set up storage bin-specific physical inventory, which physical inventory procedures are applicable? (There are three correct answers.)". Periodic physical inventory procedure. Zero-stock physical inventory procedure. Low-stock physical inventory procedure. Ad hoc physical inventory procedure.

"Physical inventory documents can only be deleted if the status is which of the following?". Inactive, active, recounted. Inactive, active, counted. Inactive, active, posted. Active, posted, recounted.

"The physical inventory process can be a paper-driven process or based on RF devices. What is a benefit of performing a physical inventory with RF devices over the paper-driven count?". No physical inventory document printing is required. Manual entry of count results isn’t required. Results are recorded in real time in the system. Correct and accurate data entry is possible by providing scanned data verification. All of the above.

"To perform stock comparison between SAP S/4HANA and EWM, you can use which of the following transactions?". Transaction /SCWM/ERP_STOCKCHECK. Transaction /SCWM/PI_SAMP_STOCK. Transaction /SCWM/WM_ADJUST. None of the above.

"The main difference between low-stock check and zero-stock check is which of the following?". Both are triggered when the bin has low stock, so there’s no difference. "Zero-stock check occurs when the pick quantity and storage bin quantities are the same.". "Zero-stock check triggers when the storage bin quantity is less than the limit value after the pick task confirmation.". Zero-stock check is triggered during the first putaway of the fiscal year.

"Which of the following can be defined in a physical inventory area? (There are three correct answers.)". Putaway physical inventory. Low-stock physical inventory. HU count. Storage bin. Product.

"The printing physical inventory process is possible with which physical inventory document status?". Inactive. Delete. Active. Post.

"Which of the following isn’t a standard process assigned to user-defined rea- son codes?". Warehouse task. Pending claim from stock transfer. Inspection document. Inbound delivery.

"A physical inventory area must be assigned to which warehouse-specific setting to create a physical inventory document?". Reason codes. Priorities. Activity areas. Storage bins.

"Sample-based inventory is performed with an external system by using which inventory procedure? (There are two correct answers.)". ES External Procedure (product-specific inventory). HL Ad Hoc Physical Inventory Procedure (storage-specific inventory). EL External Procedure (storage bin-specific inventory). AL Annual Physical Inventory Procedure (storage bin-specific inventory).

"You’re planning to perform a physical inventory process in the warehouse. You can create physical inventory documents specific to which of the following? (There are two correct answers.)". Storage type. Product. Storage bin. Fixed bin.

"In the warehouse, you perform physical inventory, picking, putaway, stock change, and internal movements. Which of the following is used to perform physical inventory?". Activity areas. Storage bins. Storage sections. All of the above.

"In EWM, there are goods movement performed internally without any reference from SAP S/4HANA. Which of the following are identified as internal goods movement within EWM? (There are three correct answers.)". Warehouse reorganization. Ad hoc movements. Slotting. Picking. Replenishment.

"You want to set up replenishment for the warehouse in EWM. At which level can you specify or activate the replenishment process in EWM?". Storage type. Storage section. Warehouse. None of the above.

"You’re confirming stock removal warehouse stock, and the stock figures go below the minimum level. Which replenishment method system is triggered?". Planned replenishment. Crate part replenishment. Automatic replenishment. Direct replenishment.

"You’re working on setting up the replenishment process in EWM per your business requirements. Which of the following replenishment types do you need to review?". Planned replenishment. Automatic replenishment. Order-related replenishment. Crate part replenishment. All of the above.

"What is the main source from which the system influences the replenishment quantity? (There are two correct answers.)". Cost. Supplier availability. Demand forecast. Predefined stock levels. Availability of transports.

"You have the replenishment process in EWM for your warehouse. To initiate planned replenishment, you’ll set up fixed bin assignment in Transaction /SCWM/BINMAT or set up a storage view in the warehouse product master with Transaction /SCWM/MAT1. If you have to set up the warehouse product master, what fields are not involved in the replenishment of storage bins? (There are two correct answers.)". Bin Rounding. Minimum Quantity. Maximum Quantity. Storage Type Control. Minimum Replenishment Quantity.

"Which replenishment method is triggered based on open outbound delivery orders?". Automatic replenishment. Direct replenishment. Crate part replenishment. Order-related replenishment.

"What are the prerequisites for order-related replenishment? (There are two correct answers.)". "Specify rough bin determination for the warehouse process type used in the outbound delivery order". Activate order-related replenishment for the storage type. Maintain exception code REPL for picking confirmation. Maintain PSA bin assignment for party entitled and product.

"What is a difference between direct replenishment and order-related replen- ishment?". "Direct replenishment is triggered via background job or online, but orderrelated replenishment is triggered via exception code.". "Order-related replenishment is triggered via background job or online, but direct replenishment is triggered via exception code.". "Order-related replenishment is triggered via background job or online, but direct replenishment is triggered via warehouse task confirmation.". All of the above.

"What SAP-delivered warehouse process type is used for direct, planned, order- related, and planned replenishment?". 3100. 3010. 2010. 1010.

Direct replenishment can only be used in which case?. Fixed bin scenarios. Warehouse task confirmation. Replenishing PSA bins. None of the above.

"Picker-directed replenishment can be performed using which replenishment method?". Crate parts. Order-related. Planned. Direct.

"To replenish production supply area (PSA) bins, you need to activate which of the following?". Planned replenishment. Order-related replenishment. Crate part replenishment. Automatic replenishment.

"Using Transaction /SCWM/POST, you can create either a direct posting change or a posting change via a warehouse request document. True or false?". True. False.

Which of the following is not a possible option in a posting change?. Create and confirm warehouse tasks, which posts goods movement. Post goods movement and then create and confirm warehouse tasks. Post goods movement only. Don’t change stock attributes.

"You can initiate a posting change or stock transfer from SAP S/4HANA to create a delivery document to post a posting change or stock transfer in EWM through which of the following transactions? (There are two correct answers.)". Transaction MIRO. Transaction VLMOVE. Transaction MIGO. Transaction /SCWM/POST.

"You create delivery documents in SAP S/4HANA for outbound, inbound, posting change, and stock transfer. Once the deliveries are replicated to the EWM system, the delivery document header data contains which of the following? (There are three correct answers.)". Goods receiving or shipping office. Product. Confirmation date. Scheduling data. Weight and volume.

"Posting changes initiated from EWM can be triggered with which transaction? (There are two correct answers.)". Transaction /SCWM/POST. Transaction /SCWM/PRDI. Transaction /SCWM/MON. Transaction /SCWM/PRDO.

"Stock transfers in EWM can be executed with which transaction? (There are three correct answers.)". Transaction /SCWM/MON. Transaction /SCWM/ADGI. Transaction /SCWM/ADPROD. Transaction /SCWM/PRDI.

"A stock transfer initiated from SAP S/4HANA to another plant or warehouse creates which of the following documents? (There are three correct answers.)". Inbound delivery. Outbound delivery. Posting change. Material document for scrapping.

"Stock transfers to non-EWM-managed storage locations in EWM can be performed with which transaction?". Transaction /SCWM/PRDO. Transaction /SCWM/MON. Transaction /SCWM/PRDI. Transaction /SCWM/ADGI.

"The main difference between stock transfer and posting change is which of the following?". "Posting change is to change attributes of stock category, batch number, stock type, or another characteristic, and stock transfer is to transfer stock to another storage bin or another plant or storage location.". "Posting changes can only be initiated from SAP S/4HANA, but stock transfers can be initiated from both EWM and SAP S/4HANA.". "Stock transfers can only be initiated from SAP S/4HANA, but posting changes can be initiated from both EWM and SAP S/4HANA.". Both are internal processes.

Which activity type is used for a posting change?. INVE. PICK. STCH. PTWY.

"You want to create a posting change in EWM through a warehouse request. What is the EWM document type for posting change?". SWHI. SREA. TWPR. None of the above.

Warehouse monitors can be warehouse dependent. True or false?. True. False.

"Which fields are default values for the warehouse monitor? (There are three correct answers.)". Warehouse Numbers. Monitor. Refresh Time. Delivery Priority. Delivery Reason.

"The default demo mode in the warehouse monitor is set to Display Demo Data Set. True or false?". True. False.

Which transaction is used to access the warehouse monitor?. Transaction /SCWM/MAT1. Transaction /SCWM/MON. Transaction /SCWM/PRDO. Transaction /SCWM/PRDI.

Which transaction is used to access the easy graphics framework (EGF)?. Transaction /SCWM/EGF. Transaction /SCWM/MON. Transaction /SCWM/PRDO. Transaction /SCWM/PRDI.

"What is the importance of the More Methods dropdown in the warehouse monitor?". Allows you to navigate to the associated transaction. Allows you to execute the selected object. Allows you to display the selected object. All of the above.

"The warehouse cockpit is used to monitor warehouse activities graphically. True or false?". True. False.

You can use the EGF to define the warehouse cockpit. True or false?. True. False.

Which of these are available warehouse KPIs in EWM?. ODO Items Without GI by Planned GI Time. ODO Items Without Pick WT by Planned GI Time. Open WT by Warehouse Process Type. Open WT by Activity Area. All of the above.

What is the purpose of navigation in the warehouse monitor?. Navigate to associated objects. Display selected objects in the same screen. Display selected objects in another screen. All of the above.

"Which of the following tools can be used to determine the stock in a storage bin? (There are two correct answers.)". Warehouse monitor. RF framework. EWM check monitor. Warehouse cockpit.

"The warehouse monitor provides details of warehouse activities. Which of the following can be monitored using the standard monitor? (There are three correct answers.)". List of production orders. Outbound deliveries. Inbound deliveries. Stock overview. List of process orders.

Which activities can be performed using the warehouse monitor?. Block the storage bin for stock removal and putaway. Monitor stock. Navigate to the delivery document. All of the above.

"What are the different measurement services types? (There are three correct answers.)". Basic measurement services (BMS). Custom measurement services. Calculated measurement services. Tailored measurement services. Conditions measurement services.

"Which of the following measurement services can be added to the warehouse cockpit? (There are two correct answers.)". Basic measurement services (BMS). Calculated measurement services. Tailored measurement services. Formula editor.

Yard management is activated for a warehouse. True or false?. True. False.

"Which of the following structures are possible in a yard? (There are two correct answers.)". Goods receipt zone. Checkpoint. Parking space. Transportation unit (TU).

What transaction is used to check in a TU at a checkpoint?. Transaction /SCWM/CICO. Transaction /SCWM/MON. Transaction /SCWM/YMOVE. Transaction /SCWM/PRDI.

"What transaction is used to move a TU from a checkpoint to the warehouse door?". Transaction /SCWM/CICO. Transaction /SCWM/YMOVE. Transaction /SCWM/PRDO. Transaction /SCWM/PRDI.

"What values can the system determine using staging area and door determination rules? (There are three correct answers.)". Staging area. Warehouse process type. Doors. Staging area groups.

"A TU is created in EWM in the advanced shipping and receiving (ASR) process. True or false?". True. False.

"Which of the following functions can be performed from a TU (Transaction /SCWM/TU)? (There are two correct answers.)". Assign deliveries to Tus. Deconsolidation. Packing from TUs. Assign HUs to TUs.

A yard is part of the warehouse structural element. True or false?. True. False.

"Which of the following functions can be performed in a yard? (There are two correct answers.)". Unloading Tus. Monitoring stock in the yard. Yard movements. Loading TUs.

"The shipping cockpit can be used for which of the following functions? (There are three correct answers.)". Create TUs. Unload TUs. Load TUs. Create waves. Check-in/check-out TUs.

"How is SAP Dock Appointment Scheduling integrated with EWM? (There are two correct answers.)". Storage type. Docking location. Loading point. Checkpoints.

"Which of the following can be defined as a yard storage bin? (There are three correct answers.)". Goods receipt zone. Parking space. Checkpoint. Door. Goods issue zone.

"A warehouse door can be assigned to which of the following objects? (There are two correct answers.)". Activity area. Storage bin. Quant. Yard warehouse number.

"The staging area determination rule helps to determine which of the following values? (There are three correct answers.)". Route. Warehouse order creation rule. Staging area groups. Staging areas. Staging bays.

"Which IDoc type is used to replicate the shipment with assigned inbound deliveries to EWM once the planning for shipment is complete?". SHPMNT50. SHPMNT150. SHPMNT05. SHPMNT105.