ARUBAHPE

Which feature supported by SNMPv3 provides an advantage over SNMPv2c?. Transport mapping. Community strings. GetBulk. Encryption.

You are doing tests in your lab and with the following equipment specifications AP1 has a radio that generates a 10 dBm signal AP2 has a radio that generates a 11 dBm signal AP1 has an antenna with a gain of 9 dBi AP2 has an antenna with a gain of 12 dBi. The antenna cable for AP1 has a 2 dB loss The antenna cable for AP2 has a 3 dB loss What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for APT?. 26 dBm. 30 dBm. 17 dBm. -12 dBm.

With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1?. int 1. switching, ip address 10 10 10 1. int 1. no switching, ip address 10 10 10.1. int 1. ip address 10.10.10.1. int 1. routing, ip address 10.10.10 1.

A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several A5s and A5S. Cables running to theAPs are not labeled. The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly? A) port-access Ildp-group |AP-Group seq 10 match sys-desc AP-515 seq 20 match sys-desc AP-575 port-access role IAP-Role description ARUBA AP poe-priority high trust-mode dscp vian trunk native 100. vian trunk allowed 100,200,300 enable port-access device-profile IAP-Profile associate role |AP-Role associate lidp-group IAP-Group B) port-access lldp-group IAP-Group seq 10 match sys-desc 515 seq 20 match sys-desc 575 port-access role IAP-Role description ARUBA AP poe-priority high trust-mode dscp vian trunk native 100 vian trunk allowed 100,200,300 port-access device-profile |AP-Profile associate role IAP-Role associate lidp-group |AP-Group no shutdown C) port-access Ildp-group IAP-Group seg 10 match sys-desc 515 seq 20 match sys-desc 575 port-access role IAP-Role description ARUBAAP poe-priority high trust-mode dscp vian trunk native 100 vian trunk allowed 200,300 port-access device-profile JAP-Profile enable associate role IAP-Role associate Ildp-qroup IAP-Group D) Port-access IIdp-group IAP-Group seq 10 match sys-desc 515 seq 20 match sys-desc 575 port-access role IAP-Role description ARUBAAP poe-priority high trust-mode dscp van trunk native 100 vian trunk allowed 100,200,300 port-access device-profile IAP-Profile enable associate role IAP-Roie associate Ildp-aroup IAP-Group. Option A. Option B. Option C. Option D.

Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements After the configuration was complete, it was noted that a user assigned with the administrators role did not have the appropriate level of access on the switch. The user was not limited to viewing nonsensitive configuration information and a level of 1 was not assigned to their role Which default management role should have been assigned for the user?. sysadmin. operators. helpdesk. config.

A new network design is being considered to minimize client latency in a high-density environment. The design needs to do this by eliminating contention overhead by dedicating subcarriers to clients. Which technology is the best match for this use case?. OFDMA. MU-MIMO. QWMM. Channel Bonding.

Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse These new devices do not support 802 1X authentication. How can HPE Aruba reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?. Have the installers generate keys with ClearPass Self Service Registration. Have the MPSK gateway derive the unique pre-shared keys based on the MAC OUI. Use MPSK Local to automatically provide unique pre-shared keys for devices. MPSK Local will allow the cameras to share a key and the scanners to share a different key.

Which component is used by the Aruba Network Analytics Engine (NAE)?. JSON-based scripts. Lisp-based agents. Ruby-based scripts. Current State Database.

You need to have different routing-table requirements with Aruba CX 6300 VSF configuration Assuming the correct layer-2 VLAN already exists how would you create a new OSPF configuration for a separate routing table?. Create a new OSPF area, and attach VRF name. Create a new OSPF process ID with vrf name. Attach a new OSFP process ID with a custom routing table. Attach OSPF process ID in the VRF configuration.

With the Aruba CX switch configuration, what is the first-hop protocol feature that is used for VSX L3 gateway as per Aruba recommendation?. Active Gateway. Active-Active VRRP. SVI with vsx-sync. VRRP.