option
Cuestiones
ayuda
daypo
buscar.php

Letra P

COMENTARIOS ESTADÍSTICAS RÉCORDS
REALIZAR TEST
Título del Test:
Letra P

Descripción:
Cosillas

Fecha de Creación: 2023/04/18

Categoría: Otros

Número Preguntas: 86

Valoración:(1)
COMPARTE EL TEST
Nuevo ComentarioNuevo Comentario
Comentarios
NO HAY REGISTROS
Temario:

An AP connects to a controller. Then, the AP loses power and reboots. Which parameters will the AP remember and use from its initial connection? (Select two.). a) AP group. b) Server IP. c) AP IP address and subnet mask. d) Mobility Master IP. e) AirWave server.

An administrator wants to implement bandwidth limits to restrict employee access to high-risk web sites. On the Mobility Master (MM), where would the administrator define these limits?. a) 802.1X policy. b) User role. c) Firewall policy. d) AAA policy.

An administrator supports an Aruba wireless solution that uses ClearPass to implement server role assignment. A user reports that they are not able to access the correct department resources. The administrator determines from the connected controller that the user is associated to the login user profile instead of the department user profile. What should the administrator examine on the ClearPass server to determine the Aruba VSA User Role value that ClearPass returns to the controller?. a) Accounting. b) Event Viewer. c) Audit Viewer. d) Access Tracker.

Refer to the exhibit.An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?. a) AP load balancing is enabled. b) User load balancing is enabled. c) This is an L2-connected cluster. d) This is an L3-connected cluster.

Which protocol is used to tunnel user traffic when an administrator implements tunneled mode between an ArubaOS-Switch and an Aruba Mobility Controller (MC)?. a) IPSec. b) AMON. c) PAPI. d) GRE.

An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to add the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group. What should the administrator implement to allow the RAP to connect to the MC at the Secondary DMZ site while the outage at the primary site persists?. a) Dynamic discovery through DHCP Option 43. b) Static configuration from apboot mode. c) Dynamic discovery through DHCP Option 60. d) Dynamic discovery through multicast ADP.

Which ArubaOS CLI command can an administrator execute to determine if AP load balancing is enabled in a cluster?. a) show aaa cluster essid. b) show lc-cluster group-membership. c) show switches. d) show ap active.

An administrator wants to implement AAA in an Aruba wireless environment that references two ClearPass servers for redundancy. To use these servers, what must the administrator create that will be referenced in the AAA profile?. a) ClearPass Group. b) Server matching rules. c) Server Group. d) Server Load Balancing.

An administrator moves an AP from one campus to another. However, at the second campus, the moved AP does not connect to a controller and download an AP Group configuration. Which process should the administrator perform to reset the AP to the initial state?. a) From the controller's CLI, reboot the AP. b) From the AP's CLI apboot mode, execute a factory reset. c) From the controller's CLI, stop the autoboot process of the AP. d) From the AP's CLI, toggle POE on the AP's port.

An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?. a) User role. b) Firewall policy. c) AAA policy. d) 802.1X policy.

An administrator needs to add connectivity between two buildings that are within 15 meters of each other on a company's campus. The administrator decides to implement Aruba's wireless mesh feature between an AP in each building. How should the administrator deploy the two APs to implement the mesh feature?. a) one as a Mesh Portal AP and one as a Remote Mesh Point AP. b) one as a Mesh Portal AP and one as a Mesh Point AP. c) one as a Remote Mesh Portal AP and one as a Remote Mesh Point AP. d) one as a campus AP and one as a Mesh Point AP.

A user uses a wireless client for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user's wireless session?. a) The user is configured for PEAP, but the WLAN profile implemented EAP-TLS. b) The AP has reached the limit for number of users connected to the radio. c) The user misconfigured the Windows Managed Network Settings profile. d) The user is associated with a failed 802.1X/EAP authentication.

An administrator wants to reduce downtime of the wireless network when controllers are upgraded. Which Aruba OS feature should the administrator implement to reduce the amount of downtime the Aps will experience at the time of the upgrade process?. a) Centralized upgrades. b) AP apboot mode bypass. c) AP fast start. d) AP image preload.

An administrator wants to add a new folder in AirWave. Where would the administrator perform this action?. a) in AMP Setup. b) in AP/Devices. c) in Groups. d) in Device Setup.

A branch office location has two buildings: an office and a small warehouse that are within 20 meters of each other. A RAP at the branch office provides connectivity to the corporate office network. This RAP is also configured as a Remote Mesh Portal (RMP). Which solution should the administrator implement to provide connectivity between the office and small warehouse buildings at the branch office location?. a) Deploy a Remote Mesh Portal in the warehouse building to connect to the Remote Mesh Portal in the office building. b) Deploy a Remote Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building. c) Deploy an ArubaOS-Switch in the warehouse building with tunneled node to connect to the Remote Mesh Portal in the office building. d) Deploy a Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.

A company has a wireless network that contains a cluster of four Aruba 7030 Mobility Controllers (MC) managed by a Mobility Master (MM) located in the data center. The company has Aps deployed that are nearing the capacity of the cluster. The administrator wants to increase AP capacity. How can the administrator solve the problem?. a) Add a new controller to the Mobility Master. b) Add a Virtual Mobility Controller to the existing cluster. c) Add a 7030 controller to the existing cluster. d) Add a 7220 controller to the existing cluster.

An administrator needs to implement multiple configuration changes on a set of Aruba Mobility Controllers (MCs) that involve both VLAN and interface configurations at the same time. The controllers are deployed in a cluster. How can the administrator accomplish this task?. a) Apply pending changes, and schedule the changes to occur at a similar time. b) Create a template and deploy the changes by use of the bulk configuration update feature. c) Use AirWave to deploy the changes to respective controllers in the cluster. d) Use the Live Update (in-service update) feature for a cluster of controllers.

An administrator implements a ClearPass solution to authenticate Aruba wireless users. The Aruba wireless solution is an ArubaOS 8.x Mobility Master (MM) deployment. ClearPass sends an Aruba VSA role name for an authenticated user. However, the administrator notices that the role assigned to the user is different from the one assigned by the ClearPass server. Which two items should the administrator verify that might be the cause of this problem? (Choose two.). a) Enablement of user roles on the controller. b) Spelling of the role on the ClearPass server. c) Server-derived role assignment on the ClearPass server. d) Role existence on the Managed Network. e) Order assignment that the controller uses to select a user role.

An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under the Configuration section on the Mobility master (MM) shown in the exhibit, where should the administrator configure the split-tunnel mode so that it can be deployed to the RAPs?. a) WLAN. b) Roles & Policies. c) Access Points. d) Services.

An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When re-provisioning the RAP, the administrator must enter a user's credentials. What is the purpose of these credentials?. a) to authenticate users on wired and wireless ports. b) to authenticate the RAP device. c) to authenticate users on wireless ports. d) to authenticate users on wired ports.

An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone. What must the administrator do to fix this problem?. a) Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups. b) Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone. c) Have the MultiZone APs initially boot from the standalone controller in the data zone. d) Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.

On the Aruba Mobility Master (MM), when is an AP configured to act as Mesh Portal or Mesh Point?. a) when the mesh cluster profile is created. b) at the time of the AP's apboot mode CLI. c) when the APs are provisioned. d) when the mesh radio profile is created.

An administrator implements per-user tunneled node that involves ArubaOS-Switches and Aruba Mobility Controllers (MCs). What always happens when a wired client connects to the network?. a) All switch traffic is tunneled to the controller. b) The switch performs user authentication. c) The tunnel fails unless VMCs are used. d) Wired users map to an AAA profile on the controller.

An administrator configures Unified Communications and Collaboration (UCC) heuristics mode on an Aruba Mobility Master (MM). What should be modified in order to send items such as VoIP sessions and monitored information about adds, updates, deletions, and periodic snapshots of those VoIP sessions on the MM or the Aruba Mobility Controller (MC)?. a) OpenFlow Controller profile. b) Mgmt Config profile. c) Skype ALG Configuration profile. d) OpenFlow profile.

Which methods can be used to configure RAP redundancy when connected to two redundant Aruba Mobility Controllers (MCs) in the DMZ? (Select two.). a) Virtual IP address of the two controllers. b) Active and Standby AAC. c) Primary and backup LMS IP addresses. d) IPSec High Availability (HA) between two cluster members. e) AirWave direction to RAPs redundant Mobility Controllers.

An administrator implements a per-port tunneled node configuration for an Aruba Mobility Controller (MC) that runs ArubaOS 8.x. The controller performs both MAC and 802.1X authentication. What must the administrator specify on the controller to allow for 802.1X authentication to succeed?. a) Define External RADIUS servers in the AAA profile. b) Enable L2 Authentication Fail Through in the AAA profile. c) Define MAC addresses in the local database for the 802.1X users. d) Enable server roles in the AAA profile.

When they operate in a cluster, Aruba APs obtain AP Group configuration information form which device?. a) Mobility Master. b) AirWave. c) ClearPass. d) Mobility Controller.

Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?. a) Split-tunnel. b) Bridge. c) Tunnel. d) Decrypt-tunnel.

An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade. What should the administrator use for this upgrade?. a) Aruba image. b) Upgrade Profiles. c) Loadable Service Module (LSM). d) Cluster Upgrade Manager.

What is true about the operation of the Aruba Mobility Controller (MC) shown in the exhibit?. a) The Mobility master is in disaster recovery mode and will push changes to a Managed Controller. b) The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master. c) The disaster recovery mode is disabled, and changes will be sent to the Mobility Master. d) The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.

An administrator creates a cluster of four Mobility Controllers (MCs). When the administrator verifies the cluster operation, the administrator notices that it is operating as an L3-connected cluster. What should the administrator do to ensure that the cluster operates as an L2-connected cluster? (Choose two.). a) Include all IP addresses in the same subnets shared by the Mobility Controllers. b) Exclude all VLANs that are not trunked to each Mobility Controller. c) Verify VLAN configuration on the switch trunks that interconnects the Mobility Controllers. d) Configure a separate VRRP group for each cluster member. e) Ensure that the controller IP addresses are in the same subnet.

An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit in this configuration: -Zone A has six controllers that form a cluster. -Zone B has three controllers that from a cluster. -Zones C, D, and E have a single standalone controller each. A total of 13 VAPs are created across the five zones. Aruba Mobility Controllers (MCs) in Zones A, B and C run ArubaOS 8.1.0.1 MCs in zones D and E run ArubaOS 8.1.0.2. Some APs do not join their respective data zones. What could cause this problem?. a) The number of controllers exceeds the maximum for MultiZone. b) The MCs run different versions of the ArubaOS code. c) The number of zones exceeds the maximum for MultiZone. d) The number of VAPs exceeds the maximum for MultiZone.

An administrator wants to centralize administrative access to the Aruba Mobility Controllers (MC) and Mobility Master (MM). ClearPass is set up and the preferred authentication protocols is TACACS+. Where should the administrator perform this configuration in the MM hierarchy shown in the exhibit?. a) At the Managed Network level. b) At the two campus levels. c) At both the Mobility Master and Managed Network levels. d) At the controller levels.

An administrator wants to implement a cluster of Aruba Mobility Controllers (MCs). Which guideline should be followed?. a) Implement Virtual Mobility Controllers and Mobility Controllers in the cluster to provide scalability. b) Verify that all the controllers run the same release of software. c) Purchase a cluster license to enable clustering. d) Implement High Availability (HA) AP Fast Failover for redundancy.

A Microsoft RADIUS server is used to centralize AAA functions by a company. Upon a successful authentication lookup performed by an Aruba Mobility Controller (MC), the administrator wants to have the RADIUS server pass back the correct post-authentication role name that the controller should apply to the user's traffic. Which additional task must the administrator perform for the controller's configuration to implement this process?. a) Install ClearPass's VSA file on the controller. b) Install Microsoft's VSA file on the controller. c) Configure the server-derived rules on the controller. d) Enable AAA on the controller.

An administrator wants to use AirWave to manually add devices on the network. Where should the administrator perform this action?. a) in AMP Setup. b) in APs/Devices. c) in Groups. d) in Device Setup.

An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADIUS AAA server authentication clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2. By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?. a) The user's session remains active and RADIUS messages can still be processed between the S-UAC and AAA server. b) The user's session remains active, but the AAA server cannot implement RADIUS Change of Authorization (CoA). c) The user's session is disconnected and has to reconnect, but the S-UAC automatically updates the NAS-IP address on the AAA server to record the event. d) The user's session is disconnected and has to reconnect, and no record of this process is stored on the AAA server.

An administrator suspects that the network drops frames between a wireless client and an Aruba Mobility Controller (MC). The administrator wants to examine the frames between the AP and the controller to determine if any frames are missing. Which solution allows the administrator to use a protocol analyzer to examine the contents of the 802.11 frames between the AP and controller?. a) A Implement bridge mode. b) B Implement decrypt-tunnel mode. c) C Implement GRE mode. d) D Implement split-tunnel mode.

An administrator wants to implement 802.1X authentication on Ethernet ports on branch office controllers. What must the administrator do to implement this policy?. a) A Define the port an untrusted, and assign an AAA policy to the port. b) B Define the port as trusted, and assign an AAA policy to the port. c) C Define the port as untrusted, and assign an AAA policy to the VLAN. d) D Define the port as trusted, and assign an AAA policy to the VLAN.

Which network components are tracked by Aruba Clarity? (Choose two.). a) A Wireless associations. b) B DNS lookups. c) C AP and controller health. d) D WLAN health. e) E Client health.

What is true about Aruba controllers under normal operations in a Mobility Master (MM)-Mobility Controller (MC) architecture?. a) A The Mobility Master can push a full configuration to a Mobility Controller. b) B ARM must be used to optimize wireless performance. c) C The APs can terminate on both Mobility Masters and Mobility Controllers. d) D Any controller can perform local configurations.

An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication fails, but the 802.1X user authentication passes for a user who connects?. a) A 802.1X default user role. b) B Machine authentication initial user role. c) C 802.1X initial user role. d) D Machine authentication default user role.

Which controller connection with the Aruba as the cluster leader?. a) Controller A. b) Controller B. c) Controller C. d) Controller D.

What must the administrator configure on AirWare to monitor and run operational commands on the Aruba Mobility Masters (MMs) and Mobility Controllers (MCs)?. a) A PAPI and SSH/telnet. b) B PAPI and SNMP. c) C SNMP and HTTPS. d) D SNMP and SSH/telnet.

In a cluster-controller environment, which Aruba component in a network builds a cache table of mDNS records that can be used to help user devices access Apple Bonjour services?. a)the Mobility Master. b)any Aruba Mobility Controller. c) the Mobility Controllers that are cluster members. d)the Mobility Master and cluster members.

Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?. a) A PAPI. b) B SNMP. c) C VRRP. d) D IPSec.

An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP traps from managed devices, but no alerts are generated on the AMP for certain critical traps. Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a critical SNMP trap from an Aruba Mobility Controller (MC)?. a) A AMON rule. b) B SNMP trap rule. c) C Trigger rule. d) D Alert rule.

Which two protocols does AirWave use to monitor Aruba Mobility Controllers (MC)?. a) A PAPI and AMON. b) B SNMP and AMON. c) C PAPI and GRE. d) D SNMP and SSH.

An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic. But, when users connect with their wired desktops, they are assigned an initial role and routed to a Captive Portal page. What must the administrator do to enable desktop usage based on the user's role assignment?. a) A Implement ACLs on the RAP port. b) B Apply a server-derived role policy to the RAP port. >> posible correcta. c) C Identify the RAP port as untrusted. d) D Map the RAP port to an authentication profile.

Which configuration command enables an Aruba Mobility Controller (MC) to send AMON messages to an AirWave System?. a) A auth-server. b) B snmp-server. c) C mgmt-server. d) D tunneled-node-server.

An administrator purchases a pair of Mobility Masters (MM) and wants to deploy 16 Virtual Mobility Controllers (VMCs). What is the minimum number of clusters that the administrator needs to implement to support the number of VMCs?. a) A 1. b) B 2. c) C 4. d) D 8.

An administrator configures an ArubaOS-Switch for per-user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MC)? (Select two.). a) A GRE. b) B SSL. c) C PAPI. d) D IPSec.

An administrator has ArubaOS-Switches that support tunneled node. The administrator wants to tunnel all user traffic from the Ethernet ports on the switches, and have the controllers authenticate the user traffic and apply the appropriate user role. Which implementation meets these requirements. a) A Role-based tunneled node with the controllers configured for standalone mode. b) B Role-based tunneled node with the controllers configured in a cluster. c) C Per-port tunneled node with the controllers configured for standalone mode. d) D Per-port tunneled node with the controllers configured in a cluster.

An administrator implements a cluster of four Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM). An AP Group is configured with two VAPs and deployed to an AP that will connect to the cluster. Each AP contains two radios. How many GRE tunnels will be built from the AP to the Active AP Anchor Controller (A-AAC)?. 2. 4. 5. 8.

An administrator inherits an Aruba Mobility Controller (MC) that has an unknown username and password. Which credentials should the administrator enter to reset the administrative access?. a) A Username: backdoor; Password: @ruba. b) B Username: admin; Password: admin. c) C Username: password; Password: forgetme!. d) D Username: Aruba; Password: Reset!.

An administrator implements clustering on Aruba Mobility Controllers (MCs) that run ArubaOS 8.x. An AP is connected to a cluster member. The administrator accidentally powers off the AP. How does the AP determine that it should failover to an alternate controller in the cluster?. a) A The Mobility Master notifies the AP. b) B The AP detects a PAPI failure. c) C The cluster leader notifies the AP. d) D The Standby AAC notifies the AP.

Where on the Mobility Master (MM) can an administrator configure the VIA connection profile?. a) A L2 Authentication. b) B L3 Authentication. c) C AAA Profiles. d) D User Roles.

An AP is connected to a cluster of controllers. An AAA server provides all authentication and authorization functions for wireless users. A wireless user connects to an AP, and Active User Anchor Controller (A-UAC) and Standby UAC (S-UAC) tunnels are built from the AP to the respective controllers in the cluster. Why would an administrator create four VRRP groups with four Virtual IP (VIP) addresses in the cluster?. a) A to allow the AAA Server to enforce RADIUS CoA in case the A-UAC experiences an outage. b) B to allow High Availability (HA) Fast Failover to function in case a controller experiences an outage. c) C to allow the AP to establish redundant AP Anchor Controller (AAC) connections to the cluster. d) D to provide a VRRP group for election of the cluster leader.

An administrator has a standalone controller that runs ArubaOS 8.x software and wants to upgrade it to a newer release. The upgrade will be performed from the front panel of the physical controller. The administrator places the new software in the root directory of a USB drive. On the controller's LCD panel, no image is found. What is the cause of this problem?. a) A The image must be placed in the /Upgrade subdirectory. b) B The image must be placed in the /Images subdirectory. c) C The image must be placed in the /ArubaImage subdirectory. d) D The upgrade must be performed from the controller's WebUI.

An employee authenticates with the username employee and the correct password. However, once the user authenticates, an administrator notices that the employee is assigned the authenticated role and not the desired employee role. What should the administrator do to solve this problem?. a) A Add a new server group rule on the controller. b) B Associate the user to the employee group in Microsoft NPS. c) C the Firewall policy on the controller. d) D Reference the employee role in the WLAN VAP on the controller.

Where would an administrator define the split-tunneling mode for a RAP located at a branch office?. a) A the Firewall policy on the RAP. b) B the AAA policy on the controller. c) C the Firewall policy on the controller. d) D the VAP profile on the controller.

An administrator manages an Aruba wireless network. Users authenticate to the wireless network using PEAP, where their credentials are validated by the controller's local database. The company purchases Android tablets to use with an inventory tracking system. The administrator notices that many of the users of these devices use their normal username and password to authenticate, which allows the tablet to access all resources that the user can access from their wireless computers. This is a security violation. Which Aruba Mobility Controller (MC) feature should the administrator configure to restrict tablet access to a web portal for authentication, where an appropriate post-authentication policy can be applied to these tablets?. a) A AirMatch. b) B AP fingerprinting. c) C Server-derived roles. d) D User-derived rules.

An administrator has a cluster of Aruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers. Before rebooting, which command should the administrator use to move the APs?. a) A apmove. b) B lc-cluster move ap. c) C active-ap-rebalance. d) D active-ap-lb.

An administrator enables AP load balancing for a cluster of Mobility Controllers (MCs). APs connected to the cluster have an LMS IP address configured in their AP Group configuration. No other parameters are changed in the cluster. If the two load AP thresholds are reached, what occurs?. a) A The APs are rebalanced across the cluster. b) B The APs always stay connected to the LMS IP address configured in the AP Group profile. c) C The users are rebalanced across the cluster. d) D The users and APs are rebalanced across the cluster.

What is true about clustering and AP connections to cluster members?. a) A The AP will always stay connected to the LMS IP address configured in the AP profile. b) B During rebalancing, the active load is redistributed first. c) C The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold. d) D AP load balancing is disabled by default.

Which Aruba Mobility Controller (MC) command should an administrator execute to determine whether an ArubaOS-Switch successfully registers to an MC?. A. show port-access clients. B. show crypto ipsec sa. C. show tunneled-node-server state. D. show datapath tunnel.

An administrator configures AirGroup policies to define which Apple services are visible and available to wireless users in a campus WLAN. However, the policies are not being enforced. Where must the administrator enable the AirGroup functionality on the Mobility Master (MM) so that the policies will be in effect?. a) A At the Mobility Master hierarchy. b) B At the controller level in the Managed Network hierarchy. c) C At the Access Points level in the Managed Network hierarchy. d) D At the global Managed Network hierarchy.

An administrator uses a ClearPass server to perform user authentication and download the role configuration that should be applied to the user's session. The server is associated to an AAA profile of a VAP. However, when a user connects to the SSID of the VAP, they are assigned the default role. What must the administrator do to ensure that the role is downloaded and used?. a) A Enable download role for CPPM in the VAP's WLAN profile. b) B Enable server derivation in the ClearPass' RADIUS configuration. c) C Enable server derivation in the server group. d) D Enable server derivation in the AAA Server Group.

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?. a) A Heuristics mode. b) B WMM mode. c) C ALG mode. d) D SDN-API mode.

An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator can an administrator this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?. a) A Nodelist. b) B Servername. c) C Master_ip. d) D Cfg_lms.

What must an administrator configure in order for the ClearPass server to execute a RADIUS Change of Authorization (CoA) to Aruba Mobility Controllers (MCs) in a cluster?. a) A Active and Standby AAC with clustering. b) B VRRP IP on each cluster member. c) C IPSec High Availability (HA) between two cluster members. d) D Primary and backup LMS IP addresses.

An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a noncluster deployment. The administrator performs these tasks on the MM for the MCs: Enables L3 IP mobility for the respective VAPs on the MCs Creates a L3 domain and places the MCs in the domain However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain. What must the administrator do to fix this problem?. a) A Configure the same VLANs on the Mobility Controllers in the L3 domain. b) B Re-provision the APs associated with the Mobility Controllers. c) C Enable L3 IP Mobility globally on the Mobility Controllers. d) D Create a home-agent-to-foreign-agent mapping table.

An administrator creates a user role that department A in a company uses. Various other roles exist for other departments. All employees connect to the same ESSID, which authenticates to an external AAA server. How should the administrator configure to assign the appropriate roles to the employees?. a) A implement default roles. b) B implement server-derived roles. c) C implement user roles. d) D implement AAA profile roles.

An administrator configures a cluster with only the members shown in the exhibit. AP load balancing is enabled. There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?. a) A High value sessions are synchronized. b) B APs and clients are fully replicated. c) C Connected users are de-authenticated. d) D APs reboot and rejoin the cluster.

An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should be assigned to an administrator who needs to only generate reports and monitor WLANS and ports?. a) A Location-api-management. b) B Network-operations. C) Root. d) D AP-provisioning.

An administrator migrates Aruba Mobility Controllers (MCs) from ArubaOS.6x to ArubaOS.8. x. In the 6.x. configuration, the administrator configures GRE tunnels on the local controllers to a controller in the DMZ to keep guest traffic off the corporate network. The problem with the solution is that is creates suboptimal routing paths. Which feature should the administrator implement to solve this problem?. a) A MultiZone. b) B Mobility. c) C Clustering. d) D AirMatch.

An administrator purchases a RAP and has it shipped directly to a branch office. The branch office plugs in the RAP and the RAP contacts Aruba Activate. The RAP learns the Mobility Controller (MC) IP address and connects to it. However, the connection fails. Upon verifying the MC IP address in Aruba Activate, what should the administrator do to allow the RAP connection to succeed?. a) A Whitelist the RAP's IP address on the MC. b) B Define the RAP's IPSec pre-shared key in Activate. c) C Whitelist the RAP's certificate on the MC. d) D Configure a VPN address pool in Activate.

What can be determined from the command output shown in the exhibit?. a) A The synchronized data is protected by VRRP. b) B The command was executed on the standby Mobility Master (MM). c) C The synchronization period is at its default value. d) D The other Mobility Master (MM) is the active license server.

An administrator supports a RAP at a branch office. A user's device that is attached to the Ethernet port is assigned an 802.1X AAA policy and is configured for tunneled node. How is the user's traffic transmitted to the corporate office?. a) A It is not encapsulated by GRE and not protected with IPSec. b) B It is encapsulated by GRE and protected with IPSec. c) C It is not encapsulated by GRE but is protected with IPSec. d) D It is encapsulated by GRE and not protected with IPSec.

A network of Mobility Controllers (MCs) is managed by a Mobility Master (MM). An administrator misconfigures the IP addressing on an MC and the MC loses connectivity to the MM. How should the administrator fix this problem?. a) A Restore the previous configuration on the Mobility Master. b) B Use the disaster recovery mode on the Mobility Master. c) C Use the auto-recovery mode on the Mobility Master. d) D Use the disaster recovery mode on the Mobility Controller.

An administrator supports an Aruba wireless network. The administrator configures as AAA profile referenced in a WLAN profile, where: • The initial role assigned in the AAA profile is logon • The MAC authentication default role is guest • The 802.1X authentication role is authenticated ClearPass is used to verify the 802.1X user credentials. A user authenticates and is assigned the authenticated default role instead of the role assigned in the ClearPass server configuration. What must the administrator do so that the ClearPass role is assigned to the user?. a) A Select the Server-derived roles User Role in the AAA profile. b) B Verify the role exists on the controller. c) C Create the Download Role from CPPM User Rule. d) D Select the Server-derived roles in the Server Group section.

An administrator wants to change the default roles for the pre- and post-authentication user roles for a WLAN on a Mobility Master (MM). The controllers in the network perform all authentication. Under the Managed Network hierarchy, where can the administrator assign these roles?. a) A AAA Profiles. b) B VLAN. c) C RADIUS attributes. d) D AAA Server Group.

An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it. Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?. a) A Standard. b) B Persistent. c) C Always. d) D Backup.

An administrator manages an Aruba wireless solution, deployed in a company with locations across the world. In one country, the local government organization that controls wireless transmissions increases the maximum EIRP allowed for certain channels. Which component does the administrator need to update on the Mobility Master (MM) to accommodate this change?. a) A the Controller port configuration. b) B the regulatory-cert file. c) C the AP system profile. d) D the AP Group configuration.

In a VPN that uses certificate-based authentication, which component must be configured on the Mobility Master (MM) to allow a RAP to successfully connect to a Mobility Controller (MC)?. a) A RAP VPN username and password. b) B WLAN and new RAP group. a) C RAP IPSec pre-shared key. d) D RAP whitelist.

Which IEEE standard should user devices support to implement Fast BSS Transition when a network implements wireless roaming (mobility)?. a) A 802.11r. b) B 802.11f. c) C 801.11m. d) D 802.11i.

Denunciar Test