CAR 21 REV 02
|
|
Título del Test:
![]() CAR 21 REV 02 Descripción: CAR 21 CAA-B |



| Comentarios |
|---|
NO HAY REGISTROS |
|
The regulation defining the overall purpose of CAR 21 is found in: 21.1 - Purpose. 21.11 - Purpose. 21.71 - Purpose. 21.171 - Purpose. The requirement that the State of Registry be notified of unsafe conditions is found in: 21.3 - State of Registry Responsibilities. 21.15 - Airworthiness Conditions. 21.75 - Continued Airworthiness Responsibilities. 21.185 - Temporary Loss of Airworthiness. Rules describing when the Authority may impose special airworthiness conditions are in: 21.11 - Purpose. 21.15 - Airworthiness Conditions. 21.17 - Validity. 21.19 - Type Acceptance Airworthiness Requirements. The section establishing how foreign type certificates are accepted is: 21:19 - Type Acceptance Airworthiness Requirements. 21.21 - Acceptance of Foreign Type Certificates. 21.325 - Export Certificate of Airworthiness. 21.173 - Certification Standard. Requirements describing how design changes are approved appear in: 21.71 - Purpose. 21.73 - Design Change Approval Process. 21.75 - Continued Airworthiness Responsibilities. 21.79 - Service Bulletins. Where are service bulletins deemed approved without formal documentation. 21.73 - Design Change Approval Process. 21.75 - Continued Airworthiness Responsibilities. 21.77-Acceptance of Design Changes by the Issue of a Certificate of Airworthiness. 21.79 - Service Bulletins. The section outlining when an aircraft must not fly without a valid Certificate of Airworthiness is: 21.171 - Purpose. 21.172 - Certificate of Airworthiness - General. 21.175 - Application for a Certificate of Airworthiness. 21.185 - Temporary Loss of Airworthiness. The rule listing all evidence required to apply for a Certificate of Airworthiness is: 21.172 - Certificate of Airworthiness - General. 21.173 - Certification Standard. 21.175 - Application for a Certificate or Restricted Certificate of Airworthiness. 21.179 - Issue of Certificate or Restricted Certificate of Airworthiness. Provisions describing when the Authority may issue a Certificate of Airworthiness are in: 21.175 - Application for a Certificate of Airworthiness. 21.179 - Issue of Certificate or Restricted Certificate of Airworthiness. 21.181 - Reissue of Certificate of Airworthiness. 21.183 - Certificate or Restricted Certificate of Airworthiness in Force. The section setting out periods of validity for Certificates of Airworthiness is: 21.179 - Issue of Certificate or Restricted Certificate of Airworthiness. 21.181 - Reissue of Certificate of Airworthiness. 21.183 - Certificate or Restricted Certificate of Airworthiness in Force. 21.185 - Temporary Loss of Airworthiness. Rules for when a Certificate of Airworthiness becomes invalid due to loss of airworthiness are in: 21.181 - Reissue of Certificate of Airworthiness. 21.183 - Certificate or Restricted Certificate of Airworthiness in Force. 21.185 - Temporary Loss of Airworthiness. 21.187 Damage of aircraft. The section explaining how the State of Registry handles damage to an aircraft is: 21.185 - Temporary Loss of Airworthiness. 21.187 - Damage to Aircraft. 21.705 - Issue of Permit to Fly. 21.713-Conditions of Permit to Fly. Which regulation describes the purpose of Aircraft Environmental Standards?. 21.171 - Purpose. 21.200-Purpose. 21.205-Administration of ICAO Annex 16 Volume I and II Standards. 21.210-Noise Certification Applicability. Where are the requirements for noise certification documents listed?. 21.205-Administration of ICAO Annex 16 Volume I and Il Standards. 21.210 - Noise Certification Applicability. 21.220-Application and Grant of Noise Certifcate. 21.230 - Validity of Noise Certificate. Which section defines the applicability of engine emissions certification?. 21.260 - Engine Emissions Applicability. 21.270 - Engine Emissions Certification. 21.273-Emissions Certification. 21.275 - Vented Fuel. The rule covering acceptance of materials, parts, components and appliances is: 21.301 - Purpose. 21.303 - Replacement and Modification of Parts, Components and Appliances. 21.305 - Materials. 21.307 - Parts Manufacturing Approval (PMA). Where are requirements for PMA parts stated?. 21.303 - Replacement and Modification of Parts, Components and Appliances. 21.305 - Materials. 21.307 - Parts Manufacturing Approval (PMA). 21.321-Purpose. The regulation describing the purpose of Export Certificates of Airworthiness is: 21.321 - Purpose. 21.325 - Export Certificate of Airworthiness. 21.327 - Export Certificate of Airworthiness Exceptions. 21.335 - Validity of Export Certificate of Airworthiness. Where are requirements for an application for an Export Certificate of Airworthiness found?. 21.327 - Export Certificate of Airworthiness Exceptions. 21.329 - Applicant Eligibility. 21.331 - Application for Export Certificate of Airworthiness. 21.333 - Issue of Export Certificate of Airworthiness. The rule identifying circumstances for issuing a Permit to Fly is: 21.701 - Purpose. 21.703 - Applicability. 21.705 - Issue of Permit to Fly. 21.709 - Duration of Permit to Fly. Which section sets the maximum duration for a Permit to Fly?. 21.705 - Issue of Permit to Fly. 21.709 - Duration of Permit to Fly. 21.711 - Renewal of Permit to Fly. 21.713 - Conditions of Permit to Fly. The regulation that lists limitations and operational conditions on a Permit to Fly is: 21.711 - Renewal of Permit to Fly. 21.713 - Conditions of Permit to Fly. 21.715 - Maintenance Arrangements. 21.709 - Duration of Permit to Fly. The section defining identification of products (aircraft, engines, propellers) is: 21.801 - Purpose. 21.803 - Alteration and Replacement of Identification Information. 21.805 - Identification of Products. 21.809 - Identification of Parts and Appliances. The requirement for identifying critical parts appears in: 21.805 - Identification of Products. 21.809 - Identification of Parts and Appliances. 21.811 - Identification of Critical Parts. 21.813-Identification of TSO/ETSO Articles. Which section specifies marking requirements for TSO/ETSO articles?. 21.809 - Identification of Parts and Appliances. 21.811 - Identification of Critical Parts. 21.813 - Identification of TSO/ETSO Articles. 21.807 - Handling of Identification Data. |





