EWM 04

How many screen sections make up the warehouse monitor display? Choose the correct answer. Three. Four. One. Two.

What documents can be found in the goods issue process? There are 3 correct answers to this question. Billing document. Transfer order. Production order. Sales order. Outbound delivery.

What document is used to execute goods movements in EWM? Choose the correct answer. Warehouse task. Warehouse request. Transfer order. Warehouse order.

Which replenishment method starts when a warehouse task is confirmed? Please choose the correct answer. Automatic replenishment. Order-related replenishment. Create parts replenishment. Planned replenishment.

How can you configure the storage of products in a temperature-controlled are of warehouse? There are 3 correct answers to this question. Create a new put away control indicator. Configuration a storage type search sequences. Create a new storage type. Create a new storage bin type. Configuration a material staging indicator.

Sometimes it is required to include the actual invoice in the shipment when it leaves the warehouse. For a direct outbound delivery, expecially for a pickup process where you want the buyer to pay immediately, you might want to issue the invoice before you post the goods issue (which would normally trigger the invoice print) For these cases, you can use the "invoice before goods issue" process to create and print the invoice before the goods issue is posted. Which statements are not correct given below. There are 2 correct answers to this question. For single requests from EWM, CRM billing or ERP billing directly creates single invoices that you cannot change. For single requests from EWM, CRM billing or ERP billing directly creates single invoices that you can change. If you want to print invoices for the contents of a vehicle or transportation unit, EWM triggers the invoice printout in CRM billing or ERP billing by sending the message Print Billing Document. If you want to print invoices for the contents of a vehicle or transportation unit, EWM triggers the invoice printout in CRM billing or ERP billing by sending the message Print Invoice Document.

Which statements are correct regarding Yard Management Setup There are 2 correct answers to this question. You cannot use one yard for multiple warehouses. You can define a warehouse with multiple yards. A yard represents a separate storage type in a warehouse. You cannot define a warehouse with multiple yards.

What values can the system determine using determination rules? There are 4 correct answers to this question. Staging bays. Doors. Staging area. Warehouse process type. Staging are groups.

What types of data can the slotting process use to determine the putaway control parameters? There are 3 correct answers to this question. Storage bin quants. Storage section. Demand forecasts/requirements. Product data. Packaging data.

The following are examples of continuous physical inventory procedures: There are 4 correct answers to this question. AdHoc. Zero stock check. Low stock check. HU counting. Putaway physical inventory.

Where does the system obtain the Stock Removal Control Indicator used to determine the storage type search sequence? Please choose the correct answer. Storage type. Customizing. Warehouse process type. Warehouse product master.

To which of the following elements can you assign a storage process? There are 2 correct answers to this question. Warehouse order creation rule. Activity area. Storage group. Warehouse process type.

Identify the four different organizational models for production supply. There are 4 correct answers to this question. Two EWM managed storage locations in one warehouse. Three EWM managed storage locations in one warehouse. One EWM managed storage location. MM-IM managed storage location. Two EWM managed storage locations in two warehouses.

Labor management is activated at what levels in EWM? There are 2 correct answers to this question. Activity area. Storage type. Activity type. Warehouse. Internal process step.

Which of the following factors influence replenishment quantity? There are 2 correct answers to this question. Demand forecasts. Supplier availability. Availability of transportation. Cost. Predefined stock levels.

What are the key fields to define a delivery document in SAP extended warehouse Management? There are 2 correct answers to this question. Document type. Warehouse number. System profile. Document category.

In Warehouse Order Assignment to Queue, When the system creates a warehouse task (WT), it searches for an appropriate queue to assign to it, based on the following WT paremeters There are 2 correct answers to this question. Destination activity area. Bin activity area. Yard access type. Source activity area.

What information is used to determine the availability group? There are 2 correct answers to this question. Plant. Stock category. Non-location-dependent stock type. Warehouse number.

Which applications is SAP EWM allow you to adjust the analysis data displayed to fit your needs? There are 3 correct answers to this question. Shipping cockpit. Warehouse cockpit. Warehouse management monitor. Graphical warehouse layout. Dock appointment scheduling.

Which structure objects do you have to maintain to integrate Dock Appointment scheduling into EWM? There are 2 correct answers to this question. Loading points. Staging areas. Yard. Docking locations.

What putaway parameters can the slotting process determine? There are 3 correct answers to this question. Storage section. Activity area. Storage type. Bin type. Activity type.

EWM Delivery Document Structure which information is stored at Document Item level? There are 3 correct answers to this question. Serial number. Dates such as goods receipt or picking date. Delivery quantity. Confirmed delivery date. Tolerances for over and under delivery quantities.

What fields in the ERP system are used to determine the "intermediate" warehouse number in delivery documents There are 2 correct answers to this question. Company code. Storage condition. MRPArea. Plant. Storage Location. Shipping condition.

Which methods do you use to transfer transactional data between SAP ERP and SAP Extended Warehouse Management? There are 2 correct answers to this question. IDoc. qRFC. BAPI. IPPE.

When staging is triggered from SAP ERP with the advanced production integration which of the following occurs? Please choose the correct answer. An outbound delivery and an inbound delivery are created in SAP ERP. A production material request is created in SAP EWM. An outbound delivery is created in ERP and copied to SAP EWM as posting change.

For the Preliminary inspection handling unit, which of the following is true? Please choose the correct answer. As the first person for HU, decide if it is "good" or "bad". Firstly, more the HU`s to a work center. Need the integration with SAP ERP QM.

In addition to the warehouse number, what fields are used for warehouse process type determination? Please select all the correct answers that apply. Item Type. Control indicator. Delivery priority. Document type.

Which distribution methods can you use to replicate transactional data from an SAP ERP system to SAP Extended Warehouse Managemente? There are 2 correct answers to this question. Distribution via post processing framework (PPF) actions. Manual distribution. Core Interface (CIF) distribution model. Immediate distribution at document creation.

When you create a direct outbound delivery order, where can availability checks happen? There are 2 correct answers to this question. In SAP EWM. In SAP CRM. In SAP TM. In SAP APO.

Which of the following are examples of warehouse request documents? There are 2 correct answers to this question. Posting Change Request. Outbound Delivery Order. Inbound Delivery. Warehouse task. Outbound Delivery Request.

In a yard, which of the following entities can you have? There are 2 correct answers to this question. Vehicles. Transportation units. Containers.

What can you do with a storage group? There are 2 correct answers to this question. Use it to define a logical or physical breakdown of a storage type. Use it in process and layout oriented storage control. Assign it to multiple storage bins. Assign it as an intermediate storage group.

What SAP component supports RFID processing in EWM? Choose the correct answer. Automatic Input Identification (AII). Active ID Identification (AII). Auto RFID (ARFID). Auto-Id Infrastructure (AII).

Layout-oriented storage control is normally used when stock movements in the warehouse do not travel directly from a source storage bin to a destination location. Instead, they travel through an intermediate storage bin or many intermediate storage bins. What ar the exceptions? There are 2 correct answers to this question. When pick points are used. When you want to pack the material at a work center. When you want to apply a value added service. When you want to switch resorces.

What are the three components to yard management: There are 3 correct answers to this question. Yard Location Management. Yard Stock. Yard Monitoring. Yard Movements.

Packing mode to control creation of pick HU They are 3 correct answers to this question. BADI. Simple algorithm. Complex. Consolidation group. Limit value.

You have maintained several process types that should all use the same storage type search sequence for putaway. You want to minimize customizing efforts and create only one entry for these process types. What can you use to achieve this goal? Please choose the correct answer. Storage process. Activity assigned to process type. Putaway control indicator. Process type group.

Which of the following is a required component of a value-added services (VAS) order? Please choose the correct answer. Auxiliary products. Packaging specification. Delivery items. Bill of material.

Which cross-docking methods require the use of SAP Advance planning and Optimization? There are 2 correct answers to this question. Push deployment. Recipient-driven flow-through. Pick from goods receipts. EWM-triggered opportunistic cross-docking.

Which statements are not correct regarding Vehicles and Transportation Units There are 2 correct answers to this question. A vehicles is the smallest loadable unit for a transportation unit that is used to transport goods. A transportation units can comprise one or more vehicle and represents the physical entity of the transport vehicle. A vehicle is a specialization of a particular means of transport. A vehicle is a specialization of a particular means of transport.

Slotting is used to determine the following indicator for optimal putaway: There are 2 correct answers to this question. Putaway control indicator. Cycle counting indicator. Storage section indicator.

The putaway control indicator used to determine the storage type is obtained from the ... Please choose the correct answer. Party entitled to dispose. Inbound delivery document. Storage type. Warehouse product master. Configuration table.

Bin sort sequences are assigned to a combination of the following fields. There are 3 correct answers to this question. Activity. Activity area. Warehouse number. Stack. Level. Storage type.

Which of the following sentence is true about Transportation cross-dockling (TCD) Select the correct answers to this question. In a supply chain in transportation cross-docking, the final destination can not be located domestically. You can not use TCD to transport HUs to your own final warehouse. Transportation cross-docking does not support returns. In unplanned cross-docking, you define in Customizing how the cross-docking process is to proceed.

What are the two forms of counting? Choose the correct answer. Internal and external. Implicit and Explicit. Cycle counting and continuous. Direct and Indirect.

What are some of the characteristics of the expected goods receipt documents? There are 3 correct answers. They are temporary. They only exist in EWM. They are permanent documents and can be archived. They are used to execute goods receipt processing in EWM. They are used to create inbound delivery documents in EWM.

What are some requirements for automatic wave creation? There are 2 correct answers to this question. Conditions and condition records exist. Cartelization planning is done. Wave templates are defined. Transportation unit planning is finalized.

Which of the following put away strategies are used when the system puts away stock based on the handling unit type? There are 2 correct answers to this question. Bulk storage. Additions to existing stock. Pallet storage. General storage.

Which of the following are examples of indirect labor tasks? There are 3 correct answers to this question. Inventory counting. Lunch break. Picking. Meeting. Housekeeping. Cleaning.

Which of the following are storage type roles? There are 3 correct answers to this question. Deconsolidation. Indentification point. Work center in staging areas grupo. Conveyor system. Production supply.

EWM can used with the following releases: Choose the correct answer: From SAP R/3 4.6C forward with Service Pack 06. Only SAP ECC 5.0 and beyond. Only SAP ECC 6.0 and beyond. From SAP R/3 3.0F forward with Service Pack 06.

Which of the following is used to perform activities like picking, put away or a physical inventory? Please choose the correct answer. None of the anove. Storage Bin. Storage Section. Activity Areas.

You can use physical inventory functions in EWM to carry out a physical inventory of products and handling units (HUs) for stock control and balance sheet purposes. Which of the following are physical inventory functions in EWM? There are 2 correct answer to this question. Storage-type-specific physical inventory. HU-specific physical inventory. Product-specific physical inventory. Storage-bin-specific physical inventory.

Which of the following are considered warehouse activities? Please select all the correct answers that apply. Scrapping. Putaway. Picking. Posting changes. Stock transfer withing the warehouse.

Which of the following processes are considered part of theEWM inbound process? There are 4 correct answers to this question. Deconsolidation. Wave processing. Value-Added Services (VAS). Quality checking. Slotting.

Which of the following is a prerequisite for assigning a warehouse order to a resource? Please choose the correct answer. The warehouse order must be in a queue with the same operating environment as the resource. The warehouse order must be picked from the same activity area that is assigned to the resource. The creation of a pick handling unit must be done automatically with a packaging specification. The resource group of the resoruce must be assigned to the warehouse order creation rule.

What is the required status of the physical inventory document before you can trigger a recount? Please choose the correct answer. Poster. Counted. Active. Recounted.

Which assignment do you make to create external process steps in process oriented storage control? Please choose the correct answer. External process step to and SAP internal process step. External process step to a storage type. External process step to a work centre. External process step to a packaging specification.

What must you keep in ming about system profiles when creating new document types? Please choose the correct answer. That they are predefined and not changeable. That you should use the ones created by Business configuration sets (BC Sets). That they have to be assigned to your new document type. That you have to define your own for your specific processes.

WOCR's are determined by which of the following? There are 2 correct answers to this question. Storage section. Bin type. Activity area. Storage type. Activity type.

What document in EWM contains the same basic information as the inbound delivery document in SAP ERP? Choose the correct answer. The inbound delivery document. The inbound delivery notification document. The inbound delivery requirement document. The transfer requirement.

What document is EWM represents an executable work package? Choose the correct answer. Warehouse order. Transfer order document. Warehouse task. Inbound delivery document.

In pick, pack, and pass, warehouse workers pass the product from activity are to activity are until it arrives at the actual destination storage bin. In which setting, the system specifies the sequence for processing the warehouse orders and corresponding pick HUs. Please choose the correct answer. System-controlled pick,pack, and pass function. Automated pick, pack, and pass function. Machine controlled pick, pack, and pass function. User-controlled pick, pack, and pass function.

Which of the following are internal goods movements? There are 3 correct answers to this question. Warehouse Reorganization. Ad hoc movements. Direct putaway. Replenishment. Slotting.

In what EWM document is the warehouse process type assigned? Choose the correct answer. Outbound delivery. Warehouse order. Outbound delivery order. Outbound delivery request.

Measurement services types. There are 3 correct answers to this question. Calculated. Formula. Condition. Basic. Tailored.

You need to create warehouse tasks for put away. Which SAP Extended Warehouse Management document do you use as your reference document? Please choose the correct answer. Expected goods receipt. Inbound delivery. Goods receipt notification. Inbound delivery notification.

Which of the following are ways that you can represent a yard in EWM? There are 3 correct answer to this question. A storage type with an unspecified role. A storage section. A physical location or address. A storage type with the role yard in the warehouse. A separete warehouse number that includes a storage type with the role yard.

In Labor Management, what document contains all of the relevant data that can be used to compare the planned and actual time? Please choose the correct answer. Inbound delivery. Performace document. Executed workload. Tailored measurement services. Planned workload.

Which sentences are true about cross-docking There are 2 correct answers to this question. EWM consider inbound delivery items that are relevant for the quality inspection. EWM does not consider inbound delivery items that are relevante for the quality inspection. For cross-docking, EWM only considers inbound delivery items for which goods receipt has been confirmed. For cross-docking, EWM only considers inbound delivery items for which goods receipt has not been confirmed.

Which of the following are putaway strategies in EWM? There are 4 correct answers to this question. Manual. Bulk. Nextemptybin. Open storage. Pallet. FIFO.

What can you do with a wave? There are 3 correct answers to this question. Add or remove items. Delete the wave. Release the wave to create the warehouse task. Post the goods issue.

What are packing specifications used for? There are 2 correct answers to this question. For pick HUs. For unloading. For palletization.

Which options are available in the packaging profile that is assigned to the warehouse order creation rule? There are 3 correct answers to this question. Create items in the outbound delivery for the packaging materila. Skip a warehouse task that no longer fits into the pick handling unit. Limit the number of items to be packed in the pick handling unt. Use a simple algorithm, a complex algorithm, or a BAdI. Consider length, width, and height.

EWM uses which document type to differentiate that an EWM inbound delivery from production takes place Please choose the correct answer. Outbound Delivery from Production. Inbound Delivery from Warehouse. Inbound Process from Production. Inbound Delivery from Production.

If you use EWM to manage an automatic warehouse, you can use the following functions. There are 3 correct answers to this question. Automatic diversion of HUs that cannot be stored (incorrect contours, excessive weight, unidentified). Configurable paths through storage control. Transfer cars for moving storage units (handling units) horizontally to different leg stages or buffer spaces. Automatic idetification of HUs using scanners on the automatic storage retrieval facility. Stacker cranes for accessing storage bins without a driver.

Your company decided to perform EWM system for Automatic Wave Assignment with Wave Templates, which Prerequisites you need to perform There are 3 correct answers to this question. Set the Automatic Wave Creation indicator for the warehouse process type that is found for the warehouse request item. Set wave type automatic. Define the conditions for wave template determination. Create wave templates. Control for bin denial.

What organizational unit is the Supply Chain Unit assigned? Choose the correct answer. Storage type. EWM Warehouse Number. Activity Area. Plant.

What are the two types of tags in use today in RFID? There are 2 correct answers to this question. Active. cpu-direct. Passive. Hard-wired. Local.

What types of EWM data can be displayed using the warehouse monitor? There are 4 correct answers to this question. Warehouse product master data. EWMdocuments. Alerts. EWM location master data. EWM storage bin data. Process related data.