Garmin 1000 NAVIII Operation

Is the aircraft required to remain stationary while the AHRS and ADC align?. No, the AHRS/ADC can align on the move and even in flight at bank angles of up to 20 degrees for the AHRS. Yes.

When filling a flight plan, what suffix is used for a current Global Positioning System (GPS) database?. /G. /SDC. /SDGC.

Is there any warm-up time required for the engine instrumentation to be accurate?. 2 minutes prior to engine start. No.

What is the pilot action that should be taken if the MFD system self-test does not pass?. Shut down the aircraft and go with maintenance personnel. Shut down avionics for 5 minutes, then ON.

If the Jeppesen database is not current in the G1000, can the system still be used for IFR flight?. Yes, but you can't use GPS for IAP's. No, you need to return with avionics maintenance in order to update database.

Describe the process for entering a newly assigned transponder code. On the PFD, press the XPDR softkey, then press the CODE softkey and use the appropriate digit softkeys to enter the assigned code. On the MFD, press the XPDR softkey, then press the CODE softkey and use the appropriate digit softkeys to enter the assigned code.

Is the active frequency being used displayed to the inside or to the outside relative to the bezel of the G1000 navigation displays. Inside. Outside.

In what color is the active frequency displayed?. Green. Magenta.

If the COM radio frequency toggle key is held for 2 seconds, what occurs?. It will clear both frequencies. 121.50 MHz is placed in the active field of the selected COM radio.