H19-401 v2

What is incorrect description about the features of campus business on-the-go cloud migration?. Policy service, which provides policy configuration capabilities. It mainly configures security groups and access policies between security groups. It integrates AC3.0 and AC1.0 is optional. . Authentication & Portal service supports serving as an AAA server to provide authentication, authorization, and accounting capabilities. It is integrated in AC3.0 and is optional in AC1.0. Accounting relies on a third party. IP-Group synchronization service, as the control plane of IP-Group, provides collection and distribution of correspondence between IP and security groups, and is integrated in AC3.0 and AC1.0. Policy enforcement points and authentication points can be deployed on different physical devices.

in the fabric network with dual border node networking in the campus distributed gateway solution, cross-networking is recommended between the core device and the aggregation device, so that L3VXLAN tunnels are created between the two border nodes and the edge node. In this scenario, Regarding the high-reliability design of the traffic model for egress traffic, the incorrect description is: The two upstream traffic paths on edge form ecmp load balancing. Select different main exits for different source network segments. Different edge devices select different main exits. Select different main exits for different uplink network segments.

When using the planning and design tool, on which page of the tool should you adjust the board position of the service board in the modular switch?. BOQ management. Cabinet layout design. Network equipment connection design. Equipment selection.

What is the incorrect description of the intelligent routing strategy of the LAN&WAN integration solution?. Support setting primary and backup links based on applications/application groups, and intelligently select links for data forwarding. LTE is only supported as an escape link. Link intelligent switching condition settings include packet loss, delay, and jitter. Support bandwidth condition routing.

In the virtualization scenario network architecture, there are multiple node roles. Which of the following nodes can serve as both an L2 gateway and an L3 gateway?. Router Node. FW Node. Border Node. Edge Node.

Which of the following WLAN delivery strategies is wrong?. High-density venues: Huawei original factory delivery or original factory supervision delivery (CSP serves as the delivery entity, and Huawei provides engineering survey, planning, and installation training services). Wireless Backhaul: CSP Delivery. Massive indoor/outdoor dispersed site scenario: Demonstration sites (at least 5%) are delivered under the supervision of Huawei's original factory, and the remaining sites are delivered by CSP. Campus network: delivered by Huawei original factory/CSP.

Among the following devices, which ones will not cause interference to wireless APs working at 2.4GHz?. Microwave oven. Bluetooth headset. Infrared sensor. Cordless phones operating in the 2.4G frequency band.

the maximum MCS supported by WIFI6 is: MCS7. MCS9. MCS11. MCS13.

Which stage follows the association stage in the STA access process?. Scanning phase (SCAN. Link authentication phase (Authentication). Access authentication. Key agreement.

Which of the following are not features of the CloudCampus cloud management solution?. Rapid deployment, supporting plug-and-play of tenant devices. Through the NETCONF protocol, remote operation and maintenance can be achieved. In the solution, the NCE platform can provide API interfaces to connect with upper-layer applications. Huawei equipment cannot be switched between local management and cloud management modes.

In CloudCampus APP, a maximum of ( ) pictures can be uploaded to a construction site. 1. 2. 3. 5.

Configure the main interface of the translation tool, some lines are marked with different background colors for the purpose of: Relocation is too boring and the interface is too monotonous. It is purely for decoration and good looks. Remind users of points that require special attention, such as those that require manual confirmation and processing and can be discarded. To export the configuration, do not use the background color when exporting the configuration. has no practical effect.

Regarding planning and design tools, which of the following statements is incorrect?. The planning and design tool is used for after-sales planning and cannot be used before sales. If the device model cannot be used, you can provide feedback in the tool platform. Tools can ensure the logical consistency and data consistency of the design. If the networking changes greatly or changes frequently, old projects can be retained and new projects can be designed.

iMaster NCE-Campus is deployed in a virtualized environment based on Taishan physical servers. The corresponding virtualization software is: FusionCompute8.0. FusionCompute6.5.1. VMWare vSphere. FusionInsight.

The user traffic of a certain enterprise's WLAN is not very large, and there is no traffic bottleneck problem in the network. For the sake of WLAN security, the customer wants to uniformly manage WLAN data. Which of the following networking methods can the customer choose?. AC bypass data is forwarded directly. AC bypasses data tunnel forwarding. . Direct forwarding of data in Layer 3 networking. Layer 2 networking data is forwarded directly.

The maximum channel bandwidth supported by WIFI6 is: 80M. 160M. 320M. 640M.

The current controller does not support which of the following authentication methods: Portal. TACACS. P2P. 802.1X.

In iMaster NCE-Campus network plane planning, if there is no special isolation requirement, the recommended networking method is: Four-plane networking. Two-plane networking. Three-plane networking.

Where can I modify the AP icon size and line thickness in the WLAN Planner tool?. Planned resources. Global settings. Set display items. Scene setting.

. In the park scenario, what is correct about the policy linkage function?. When the authentication point and the group policy execution point are not on the same device, you need to use the policy linkage function. . In the policy linkage scenario, it is necessary to set the downlink port type of the Edge device to an extended access switch. the policy linkage function means that no matter where you go, the permissions to access resources are the same and are decoupled from the IP address. When the authentication point, access point, and group policy execution point are all connected to the access device, the policy linkage function must be used.