HP2-Z30

Which statement is true about using the RADIUS protocol for AAA functions'?. Only passwords are encrypted in the RADIUS payload. Digital certificates are used to authenticate the networking devices and AAA server. AAA accounting records can be saved using RADIUS or syslog. RADIUS uses TCP as a transport.

What is the initial OSPF state of a router when an interface becomes active for a segment?. init. loading. two-way. down.

Which statement is true about spanning tree and HP Comware and HP Provision switches?. A Provision switch requires the active region-configuration command to activate changes. A Provision switch uses non-standard port costs in spanning tree calculations. A Comware switch automatically auto-senses edge ports. A Comware switch uses non-standard port costs in spanning tree calculations.

A network administrator has an HP Comware switch that is configured with OSPF. The network administrator views the routing table and sees that a default route was learned from an OSPF neighbor (10.1.1.1). However, the network administrator wants to override this action and use a different neighbor (10.1.1 2) for the default route. The network administrator configures this command: [Comware] ip route-static 0.0.0.0 0 10.1.1.2 After configuring the command, the network administrator examines the routing table and notices that the original neighbor's default route is still in the routing table, but the static route is missing. What is the cause of this problem?. OSPF routes have a lower precedence value. The ip default-gateway command must be used when creating a default route. Only one routing protocol can be operational on a Comware device. The static route has a syntax mistake.

After setting up DHCP relay, the network administrator has the DHCP client try to acquire addressing information, but the process fails. What should the network administrator do to solve this problem?. Configure DHCP relay on SwitchB. Enable DHCP Snooping on SwichA. Execute the dhcp enable command on SwitchA. Execute the routing command SwichA.

Which technology allows 802.11n scale up speeds of 600 Mbps?. Spatial Multiplexing (SM). Multiple-Input Multiple-Output (MIMO). Worldwide Interoperability for Microwave Access (WIMAX). Channel Bonding (CB).

Which IMC agent starts and stops the IMC server and allows a network administrator to view the status of the IMC processes?. Policy Administration Agent (PAA). Deployment Monitoring Agent (DMA). Administration Deployment Agent (ADA). IMC Processing Agent (IPA).

Which protocol only requires MAC addressing?. LLDP. DHCP. NTP. Syslog.

Which HP Comware command can a network administrator execute to view the IP routing table?. display ip routing-table. show ip route. show ip routing-table. display ip route.

Refer to the network exhibit. A user brings a generic switch from home into a company. The user switch does not support any Spanning Tree protocols. The user switch has two connections to the network on switch ports that are defined as edge ports. Assume the company switches are HP Provision switches. Which HP protection feature effectively manages this problem?. Edge Protection. Loop Protection. Root Protection. BPDU Protection.

Refer to the exhibit. A network administrator has a server currently connected to an access layer switch. The network administrator needs link redundancy for the server and wants to add a second access layer switch and connect it to the server. Which solution should the network administrator implement to accomplish this goal?. Add a Provision switch as the new switch and implement distributed trunking. Add a Provision switch as the new switch and implement IRF. Add a Comware switch as the new switch and implement MSTR. Add a Comware switch as the new switch and implement link aggregation.

Switch_A and Switch_B are HP Comware switches currently in the same MSTP region with the following MSTP configuration: Region name: HP Revision number 1 Instance 1:VLANs 10 and 11 Instance 2: VLANs 12 and 13 Instance 0: VLANs 1-9 and 14-4094 MSTP is operating correctly on Switch_A and Switch_B. Switch_C and Switch_D are new Comware switches and have been added to the network. The links between the switches are trunks, where VLAN 1 is the PVID and all other VLANs are permitted on the trunks. The only STP command executed on the two new switches is stp enable. Based on this information, what is the resulting Layer 2 topology?. All uplinks are blocked until the new switches have MSTP configured correctly. A Layer 2 loop will result, creating a broadcast storm,. Only one uplink from each new switch will be utilized. Both uplinks from the new switches are utilized but load sharing is inefficient.

Which action can be performed from an HP Comware switch?. Execute the super command to change privilege levels. Execute the startup-default command to define the configuration file to load upon bootup. Execute the show flash command to examine the operating systems stored in flash. Execute the boot set-default flash command to define the default operating system to load.

Which HP redundancy feature is supported by both HP Provision and HP Comware switches?. meshed stacking. distributed trunking. static link aggregation. dynamic LACP.

Which component of an HP Comware switch controls logging on to a syslog server?. Log Parser. Event Analyzer. Information Center. Event Log.

Which command defines a default route on an HP Provision switch when routing has been enabled?. ip route 0.0.0.0/0 10.1.1.1. iP route 0.0.0.0/32 10.1.1.1. ip route 0.0.0.0 0 10.1.1.1. ip default-gateway 10.1.1.1.

What is the default username and password an administrator would use to log into a new HP MSM access point?. username of "hp" and password of "hp". username of "msm" and password of "wireless". username of "admin" and password of "hp". username of "admin" and password of "admin".

Refer to the network and ARP table exhibit: The user on the left side of the exhibit wants to build a connection to the server on the right. Assume that SwitchA and SwitchB are HP Comware switches and SwitchB is a Layer 3 switch. For which IP address does the user generate an ARP?. The user generates an ARP for the MAC address that corresponds to 10.1.11.11. The user generates an ARP for the MAC address that corresponds to 10.1.11.1. The user generates an ARP for the MAC address that corresponds to 10.1.12.1. The user generates an ARP for the MAC address that corresponds to 10.112.2.

A network administrator is using Intelligent Management Center (IMC). Which protocol must the network administrator configure to correctly identify HP devices when performing auto discovery?. telnet. LLDP. SSH. SNMP.

Which Software-Defined Network (SDN) layer includes HP Provision and HP Comware switches?. control. infrastructure. operational. application.

Which HP ProVision and HP Comware commands restore a configuration file from a TFTP server to the switches' flash? (Select two.)?. copy tftp://10.1.1.1/config.cfg flash:. restore tftp://10.1.1.1/startup-configuration config.cfg. restore startup-configuration from 10.1.1.1 config.cfg. copy tftp config config.cfg 10.1.1.1 config.cfg pc.

A network administrator is expanding part of the data center in a hospital network. Three new racks of equipment need to be added, with an HP Comware 5820 series switch at the top of each rack. The Comware 5820 series switch needs to connect back to two core Comware 12500 switches using 10Gb connections. The distance between the three racks and the Comware 12500 switches is approximately 40 meters; however, the network administrator is concerned about electromagnetic and other types of interferences to electrical signals. Which solutions protect against interference and are cost-effective for this scenario? (Select two.). 10GBase-ZR. 10GBase-SR. 10GBase-ER. 10GBase-LX4. 10GBase-T.

Refer to the exhibit. A network administrator needs to configure link aggregation using static LACP on Switch-A, which is an HP Comware switch. Which configuration accomplishes this goal?. Option A. Option B. Option C. Option D.

What is the console port designation for an HP Comware switch?. interface console. con 0. aux 0. console.

When performing auto discovery with Intelligent Management Center (IMC), which two components should be defined in order to fully manage the discovered networking devices?. SNMP and syslog. telnet and SSH. SSH and TFTP. SNMP and telnet.

Which HP Comware command saves the startup configuration file to a TFTP server?. startup. restore. backup. copy.

Refer to the HP Comware configuration. interface vlan 1 ip address 10.1.1.1 255.255.255.0 quit interface vlan 2 ip address 10.1.2.1 255.255.255.0 quit interface loopback 1 ip address 1.1.1.1 255.255.255.255 quit router-id 1.1.1.1 area 0 network 1.0.0.0 0.255.255.255 network 10.1.1.0 0.255.255.255 The network administrator set up VLAN 2 as a management VLAN. This VLAN should not be included in the OSPF routing process. Now only directly connected network administrators in VLAN 2 can manage the switch. How should the network administrator solve this problem?. Define the management-vlan 2 command. Change the network command in OSPF. Define the VLAN 2 interface as a silent interface. Define the ip authorized-managers 10.1.0.0/24 command.

A network administrator has created and applied a configuration to an HP Provision switch. The network administrator then copied the active configuration to a TFTP server. Upon examining the configuration file on the TFTP server, the network administrator noticed that the operator and manager passwords were not in the saved configuration file. Which command must the network administrator execute to accomplish this task?. include-credentials. include-passwords. save-credentials. backup-accounts.

Which VLAN port type is only supported by HP Comware switches?. access. voice. trunk. hybrid.

What is the default state of spanning tree on HP Comware switches?. MSTP is enabled. RSTP is enabled. STP is disabled. PVST is enabled.

What is a key emerging standard protocol that HP Virtual Application Networks (VAN) use to implement Software-Defined Networks (SDN)?. IMC. OpenFlow. FlexFabric. OpenStack.

A network administrator has two distribution layer switches and four access layer switches. The network administrator is constantly resolving Spanning Tree problems and is looking for an alternative solution that provides redundancy and no Spanning Tree. ProVision switches with routing. ProVision switches with aggregation. Comware switches with auto-links. Comware switches with distributed trunking.

Which IRF configuration, in the correct order, includes the physical interfaces in an IRF port?. Option A. Option B. Option C. Option D.

A network administrator has installed IMC and the appropriate licenses. The network administrator is attempting to import the HP Comware and HP ProVision switches into IMC but is experiencing problems importing the Comware switches. The network administrator verifies the SNMPv2c configuration on both sets of switches and the SNMP configuration in IMC. The SNMP parameters are correct. What is the cause of the import problem?. Comware switches implement SNMPv3 by default. Comware switches require SSH to be configured for remote CLI access. Comware switches are not fully supported by IMC. Comware switches do not have telnet fully configured.

A customer must connect networks in two buildings. The buildings are 15 meters apart. The customer does not want the additional cost of installing fiber between the two buildings and thus is exploring wireless options. If the customer selects an 802.11n wireless solution, which wireless mode should they use?. inline. infrastructure. in-cell relay. multipoint.

The external server shown in the exhibit requires redundancy that uses link aggregation with LACP. Which solution meets this criteria?. Comware switches that use distributed trunking or ProVision switches that use meshed stacking. Comware switches that use IRF or ProVision switches that use distributed trunking. Comware or ProVision switches that use distributed trunking. Comware switches that use IRF or ProVision switches that use meshed stacking.

Which task should a network administrator include in the creation of an upgrade policy?. Update network management software before deploying upgrades to network switches. Make a copy of the original operating system. Test the upgrade on a core switch. Read the release notes of the original operating system.

Assume the network shown in the exhibit has implemented RSTP Based on the topology, which port is a root port?. SwrtchAport2. SwitchD port 1. SwitchC port 2. SwitchB port 1.

A network administrator acquires a new HP Comware switch from HP with the factory default settings. The network administrator logs into the console port and configures the following information: user-interface aux0 quit super password level 0 simple hp0 super password level 1 simple hpl super password level 2 simple hp2 super password level 3 simple hp3 What happens the next time the network administrator logs into the console?. The network administrator is immediately taken to level 3 with no password prompted. The network administrator must enter a password of hp3. The network administrator must perform the password recovery procedure because it was incorrectly configured. The network administrator must enter a password of hp0.

Which console cable is used on an HP Comware switch?. cross-over. rollover. USB. straight-through.

Switch 1 and Switch 2 are HP ProVision switches operating as Layer 2 switches. VLAN 33 has been defined as the management VLAN on both switches. Based on this topology, which user devices can access Switch 1 by using SSH?. only User-1, User-2, and the Server. only User-1. all users and servers in the topology. only User-1 and User-2.

Which URL can a network administrator use to access Intelligent Management Center (IMC)?. http://«ip-address> | <hostname». http://«ip-address> | <hostname»:8080/imc. http://«ip-address> | <hostname»:8043. http://«ip-address> | <hostname»:8000.

Based on this output, which statement is true?. Dynamic LACP is used, and load sharing is functioning correctly. Static LACP is used, and load sharing has failed. Dynamic LACP is used, and load sharing has failed. Static LACP is used, and load sharing is functioning correctly.

A device is connected to an HP Comware hybrid port. Which type of information from the attached device can be used to assign it to a VLAN?. access control list. IPX host address. LLDP device type. protocol.

A network administrator has created a Layer 2 network based on the design shown in the exhibit. Switch-A and Switch-B are distribution layer switches. Switch-C is an access layer switch. All switches are HP Comware switches. What is the best spanning tree solution for load sharing on uplinks in this environment?. STP. MSTP. RSTP. distributed trunking.

A network administrator executes the following command: What is the state of the VLAN 1 interface?. All interfaces in VLAN 1 are down. The IP address of VLAN 1 conflicts with another device in VLAN 1. The IP address for VLAN 1 is a duplicate of another VLAN interface on the switch. VLAN 1 has a single port in a down state.

Which statement is true concerning PoE support on HP ProVision and HP Comware switches?. Both the IEEE 802.3af and 802.3az power standards are supported. PoE is enabled by default on PoE-capable ports. Lowered-number ports, by default, have higher priority for Power requests. SNMP is used to determine power requirements of a connected devices.

Which HP Provision switch command controls the logging level of messages sent to a syslog server?. info-center level. logging severity. logging-host trap-level. syslog severity.

Which Intelligent Management Center (IMC) group role allows an administrator to manage networking devices, but cannot add new IMC administrative users?. Operator. Administrator. Manager. Maintainer.

The link aggregation is failing between the HP Provision and HP Comware switches. Which solution solves this problem?. The interfaces used for trunking on the Provision switch must be continuous. The Provision switch must be reconfigured for dynamic LACP. The Comware switch must be reconfigured for static LACP O. The Comware switch must be reconfigured for dynamic LACP.

Which Layer 2 mechanism should be used to authenticate wireless or wired users before allowing them access to network resources?. 802.1X. MIMO. 802.1Z. WPA.

A network administrator is managing the configuration files on an HP Provision switch and executes the commands shown in the exhibit. What is the probable cause of the error message when the network administrator tries to copy the file?. The flash memory in the switch is full and supports no more files. The copy command should only be used to manage operating systems. No empty configuration memory slots exist on the switch. The copy command contains a syntax error.

Which trends of today's data center networks is the HP FlexNetwork Architecture designed to meet?. virtualization. Intelligent Resilient Framework. network analytics. server decentralization.

A network administrator is building two IRF domains: - One domain for the two distribution layer switches - One domain for the access layer switches Each access layer switch should have a connection to each distribution layer switch. In this design, how many access switches can the administrator have in the access layer IRF domain before spanning tree is required to remove loops between the two IRF domains?. 2. 4. 6. 8. 12.

Which Intelligent Management center (IMC) module implements policies for environments that support brings your own device (BYOD)?. NTA. SOM. EAM. UAM.

Based on this topology, which statements are true? (Select two). The topology is functioning normally. This is a daisy chain topology. This is a ring topology. A break exists in the topology. There is a split stack.

A network administrator has a server with a single link to the network. The company is concerned about redundancy and wants to implement a solution like that shown in the right-hand side of the diagram. Which solution meets the company's needs?. HP Comware or HP ProVision switches using IRF. HP Comware switches using IRF only. HP Comware switches using meshed IRF or meshed stacking. HP Comware switches using distributed trunking only. HP Comware switches using distributed trunking or IRF.

A network administrator receives a new HP Provision switch and notices that the software version running on the switch is older than what is currently used in the network. The network administrator copies an updated version of the operating system from the new switch's USB port to the secondary flash location. The network administrator then executes the following command: Provision# boot system flash secondary: The switch reboots using the new operating system. However, when the network administrator turns off the switch and turns it back on, the switch boots from the old operating system. Which solution should the network administrator use to fix the problem?. Execute the startup-boot secondary command. ot into the switch's Monitor ROM Console and perform the upgrade a second time. Execute the boot set-default flash secondary command. Execute the boot-loader file command. Execute the startup-default secondary command.

Which 802.1X component seeks authentication?. processee. supplicant. authenticatee. authenticator.

An administrator is adding an HP Provision switch to an existing OSPF network. The switch has two VLANs, 10 and 20, that should be included in OSPF's area 0. The IP address of the switch in VLAN 10 is 10.110.1/24 and in VLAN 20 is 10.1.20.1/24. Which configuration includes both VLANs in the switch's OSPF routing process?. Option A. Option B. Option C. Option D.

Which open-standard protocol allows a network administrator to view the running operating system version and IP address of a neighboring device?. STP. LLDP. ARP. CDP.

Which configuration tool do HP Provision switches support that HP Comware switches do not support?. menu system. auto configuration tool. web-based. SNMP.

All of the switches in the exhibit are configured as follows: Config name = "Region!' Revision #= 1 Instance 1=VLANs 10.12 lnstance2 = VLANs11,13 1ST instance = VLANs 1-9.14-4094 Currently, onlyVLANs 1,10,11,12, and 13 exist on the four switches. A network administrator adds VLAN 15 to Switch_C. How is the topology affected by this change?. Spanning tree recalculates, with load sharing not in effect to Switch_C. Spanning tree recalculates, with load sharing still in effect to Switch_C. A loop now exits involving Switch_C. No topology changes occur with spanning tree.

Which statement is true about the management of HP ProVision and Comware switches?. Telnet SSH are enabled by default on Comware switches. Telnet is enabled but SSH is disabled on ProVision switches. Comware switches, by default, store usernames and passwords in a separate configuration file. ProVision switches, by default, store usernames and passwords in a separate configuration file.

Which HP switch supports nine switches in an IRF topology?. 5120-SI. 5820. 7500. 12500.

The network shown in the exhibit is comprised of four MSTP regions that are interconnected. Based on this topology, which statement is true?. PVST should be used instead of MSTP. A routing solution must be used between MSTP regions when more than one region exists. An optimized topology can be created using MSTP between the regions. The switches are running the equivalent of RSTP between the regions.

A network administrator has set up a link between two HP ProVision switches. Both switches have an IP address in VLAN 1 and can ping each other in VLAN 1.The network administrator then creates VLAN 2 and tags it to same link of both switches. How can the network administrator verify that connectivity in VLAN2 is functional between the twoswitches?. Assign each switch an IP address in VLAN 2 and use LLDP to test connectivity. Use either LLDP or ARP to test connectivity. Assign each switch an ip address in VLAN 2, and use ICMP or LLDP to test connectivity. Assign each switch an IP address in VLAN 2, and use ICMP to test connectivity. Use LLDP to test connectivity.

Which Intelligent Management Center (IMC) device discovery method is the default for device auto discovery?. ARP-based. PPP protocol-based. network segment-based. LDAP-based.

What are the correct factory default settings when the HP Comware and Provision switches are originally booted?. Provision and Comware switches have Telnet enabled. Provision and Comware switches have all Layer 2 interfaces disabled. Provision and Comware switches have default passwords defined. Provision and Comware switches have Layer 3 switching disabled.

A network administrator executes this command on an HP switch: Provision (config)# vlan 11 untag Al The network administrator immediately realizes that the port that was specified in the command was the wrong port. Port A1 should remain in its original VLAN, VLAN 1. Which command should the network administrator execute to undo the misconfiguration?. vlan 11 tagged Al. vlan 1 tagged Al. vlan 1 untag Al. no vlan 11 untag Al.

Which FlexArchitecture component uses Virtual Connect in blade server systems?. FlexFabric. FlexDataCenter. FlexManagement. FlexCampus.

What are the default logging properties for an HP Comware switch? (Select two). Displays debugging output to the console. Displays log messages to the console. Uses the Information Center to control logging functions. Uses the Event Log to save log messages. Supports five logging levels.

Which statement is correct about IRF?. Identical models of switches must be used in the same IRF domain. Logical IRF port one on a switch must be connected to IRF port two on a second switch. MSTP is used to remove loops within an IRF domain. LACP is used to build IRF port connections between switches.

Which management protocol is enabled, by default, on HP Provision switches?. Syslog. SSH. SNMP. NTP.

Which Access Point (AP) type corresponds to HP MSM autonomous operational mode?. Thin. Fat. Modal. Fit.