HPE6-A85.Cap4

A network technician is verifying that a customer successfully connected to the guest network after completing the captive portal. The network technician looks at the access tracker in ClearPass. Which role should be seen when looking at the OUTPUT tab for the customer's session?. A. Guest authenticated. B. Captive portal login. C. Captive portal redirect. D. Guest logon.

Refer to Exhibit. Which server will receive the smallest quantity of data?. A. 172.17.17.43. B. 10.100.100.25. C. 10.99.26.25. D. 192.168.0.56.

DRAG DROP Match the Open Systems Interconnection (OSI) layer with its function. Application Layer. Presentation Layer. Session Layer. Transport Layer.

Which Aruba technology provides load balancing across radio bands and AP radios?. A. Aruba ESP. B. Aruba ClientMatch. C. Aruba AirWave. D. Aruba Central.

A network technician is deploying "headless" devices in the warehouse at the HQ location. So far, an SSID with 802.1X has been configured. However, these new devices lack 802.1X support. Which option would provide enhanced security for these devices?. A. WPA3-Personal. B. Multi-Preshared keys (mPSK). C. WPA2-Enterprise. D. Opportunistic Wireless Encryption (OWE).

What is the recommended UXI monitoring solution in large logistic facilities?. A. Use a special ruggedized UXI sensor. B. Use the UXI App on all handheld devices running on Windows CE. C. Add a UXI sensor in every aisle of the logistic space. D. Use the UXI App direct on Zebra scanning devices running on Android.

What describes Clearpass OnGuard? (Select two.). A. Onguard assings an unique identity to each device. B. It is used for the self-registration of guest devices. C. OnGuard is an agent, running on client systems. D. OnGuard is doing posture checks on client systems. E. It is an intuitive portal for users to securely configure their devices.

Based on the "show ip route" output on an Aruba CX 8325, what type of route is "10.20.0.0, vrf default via 10.1.1.1, [110]"?. A. connected. B. local. C. OSPF. D. static.

A client connects to an Aruba AP in tunnel mode and is assigned to a VLAN based on the client's MAC address. Which client VLAN assignment was configured?. A. Mixed. B. Static. C. Native VLAN. D. Dynamic.

What is the ideal mounting position for a typical Aruba indoor AP?. A. Horizontal, below a suspended ceiling. B. Under a office desk. C. Horizontal, above a suspended ceiling. D. Vertical, at a wall.

A network technician is testing a new SSID for a branch office. They are able to connect, get an IP address, and resolve DNS names. However, they are not able to browse the internet. On the existing SSID at the branch, connectivity to the internet works as expected on the same VLAN as the new SSID. The wireless client should have received a new role to allow internet access. What should the network technician verify to ensure both SSIDs function in a similar way?. A. Verify each SSID's authentication and encryption parameters are enabled and the same. B. Verify that the implicit 'deny all' is the last entry in the firewall policies. C. Verify the new SSID is broadcasting on all the APs at the branch office. D. Verify the firewall policies assigned, making sure the rules are correct and ordered properly.

When does the 802.1x authentication process begin when connecting to a secured enterprise mode WLAN?. A. After the firewall policies are applied to the session. B. After the client completes 802.11 association. C. After the captive portal authentication completes. D. After the WPA 4-Way Handshake is completed.

DRAG DROP Match the Open Systems Interconnection (OSI) layer with its comparable member of the TCP/IP stack. (Options may be used more than once.). TCP/IP Application. TCP/IP Network Interface.

You have been asked to troubleshoot failed connectivity between a local subnet in the HQ Office and a remote subnet in the Branch Office. PC1 is unable to ping PC2. Use the provided topology and show command output to identify the reason for the failure: A. On Branch Office - L3-SW-2- There is no Layer 3 SVI configured in the correct subnet. B. On HQ Office L3-SW-1 - There is no route to the Branch Office. C. On HQ Office L3-SW-1 - The switch does not have a static default route to the internet. D. On Branch Office L3-SW-2- The switch does not have a static route to the HQ Office Local Subnet.

What is indicated by a flashing amber global status indicator LED on an Aruba CX6200M?. A. The switch has a recoverable fault. B. Self-test is in progress. C. The firmware image is corrupt. D. The switch is booting the firmware image.

You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports, 2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking. You need to provide an LACP connection to another identical stack with the maximum available bandwidth possible. What should you configure?. A. a 16-member LAG using 2 SFP28 ports and 6 SR5 ports on each switch. B. an eight-member LAG using 4 SR5 ports on each switch. C. an eight-member LAG using 2 SFP28 ports and 2 SR5 ports on each switch. D. a four-member LAG using 2 SFP28 ports on each switch.

Which Protocol Data Unit (PDU) represents the network layer PDU?. A. PDU3 - Packet. B. PDU4 - Segment. C. PDU1 - Signal. D. PDU2 - Frame.

Which type of device type and group persona is required to manage a Microbranch environment?. A. ArubaOS 10 AP Group Persona. B. ArubaOS 10 Branch Gateway Group Persona. C. ArubaOS 8 AP Group Persona. D. ArubaOS 8 Branch Gateway Group Persona.

Which three channels can be used simultaneously in a 2.4GHz WLAN environment while avoiding any co-channel interference?. A. 1,6, 11. B. 1,5, 10. C. 3,6, 9. D. 2,7, 11.

What change does a client make when it roams from one access point to another in a WLAN?. A. It changes the destination MAC address on its 802.11 frames. B. It changes the SSID to match the SSID on the new access point. C. It changes its default gateway to the IP of the new access point. D. It changes its association with the new wireless controller's SSID.

A network technician at a branch office is connecting VolP phones to a newly configured AOS-CX switch. Users are complaining that voice quality is not as good as at the corporate office. Further investigation shows the local-priority value at the branch office is 1 while at the corporate office is 5. What describes the issue regarding the default QoS behavior on the AOS-CX switch?. A. The QoS trust is set to DSCP by default, and the VolP phone's local-priority value is mapped to 1. B. The QoS trust is set to CoS by default, and the VolP phone's local-priority value is mapped to 1. C. The QoS trust is set to none by default, and each VolP phone's local priority is configured for CoS map entry 1. D. The QoS trust is set to none by default, and each VolP phone's local priority is configured for CoS map entry 0.

What is a common use of LLDP for wireless access points?. A. testing the quality of the physical link between the access point and the switch. B. discovery of rogue access points. C. exchange of RF channel information with nearby access points. D. negotiation of PoE power level to be provided to the access point.

A hacker has altered a user's 3-Way Handshake in order to gain access to their session. Which security mechanism would intelligently deny this traffic?. A. Out-of-band management (00BM). B. Stateless firewall. C. Access Control List (ACL). D. Stateful firewall.

What will perform a hard reset of an Aruba CX switch?. A. Press the reset button and hold the clear button while releasing the reset button for 5 seconds. B. Press and hold the reset button for 5 seconds, then release. C. Press the reset button and the clear button simultaneously. D. Press the reset button three times.

You have physical access to an Aruba CX-Switch with unknown/lost credentials. What are the possible steps to rebuild the credentials? (Select two.). A. Connect the switch via the console. Then, power cycle the switch. B. Press and hold the clear button. Then, power-cycle the switch. C. Press and hold the clear button. Then, press the reset button for 2 seconds and release both buttons. D. Call Aruba support for a one-time password. E. Use boot profile 0.

What is used by network devices to send error and operational information related to IP communications?. A. Frame Check Sequence (FCS). B. User Datagram Protocol (UDP). C. Cyclic Redundancy Check (CRC). D. Internet Control Message Protocol (ICMP).

What are two characteristics of ClientMatch? (Select two.). A. It optimizes channels of an AP. B. An algorithm to adjust RF patterns. C. It is used to locate a client. D. It is an Aruba patented technology. E. It helps to move sticky clients to another AP.

DRAG DROP Match the most cost-effective option for cabling each requirement. (All lengths indicate total cable length including patch cable(s), service loops, etc. where used.). Single mode fiber. Cat 6a cable. Direct attach copper (DAC) cable. Multimode fiber. Cat 5e cable.