HPE6-A85.Cap6

You are in a meeting with a customer where you are asked to explain the network redundancy feature VRRP. What is the correct statement for this feature?. Master role is elected by highest weight setting. Master role is elected by lowest IP defined. Master role is elected by highest proirity setting. Master role is elected by lowest MAC address.

Based on the given topology, what would be a valid configuration for Switch 1 port 1/1/2 to enable traffic to PC2, if an unmanaged switch is connected between PC2 and Switch 1?. int 1/1/2, vlan access 20. int 1/1/2, trunk allowed vlan 20. int 1/1/2, vlan native 20. int 1/1/2, untagged vlan 20.

Which three channels can e used simultaneously in a 2.4 GHz WLAN environment while avoiding any co-channel interference?. 3, 6, 9. 1, 5, 10. 2, 7, 11. 1, 6, 11.

You need to troubleshoot an Aruba CX 6400 switch that fails to boot correctly. Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS. RJ-45 console port. USB Bluetooth dongle. mgmt port using SSH. USB-A console port.

In the given topology, a pair of Aruba CX 8325 switches are in VSX stack using active gateway. What is the nature and behavior of the Virtual IP for the VSX pair if clients are connected to the access switch using VSX as the default gateway?. Virtual IP is active on the primary VSX switch. Virtual IP is active on both CX switches. Virtual floating IP failover in case of a failure. Virtual IP uses SVI IP address synced with VSX.

What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras, APs, and other PoE devices?. Enable Quick PoE on the switch modules. Configure PoE power management to Dynamic Mode. Configura PoE power management to Class-based Mode. Enable profiling for device provisioning.

When using an Aruba standalone AP you select "Native VLAN" for the Client VLAN Assignment. In which subnet will the client IPs reside?. The same subnet as the Aruba ESP gateway. The same subnet as the mobility controller. The same subnet as the access point. The same subnet as the mobility conductor.

Which type of device type and group persona is required to manage a Microbranch environment?. ArubaOS 8 AP Group Persona. ArubaOS 10 Branch Gateway Group Persona. ArubaOS 8 Branch Gateway Group Persona. ArubaOS 10 AP Group Persona.

What change does a client make when it roams from one access point to another in a WLAN?. It changes its association with the new wireless controller's SSID. It changes the SSID to match the SSID on the new access point. It changes its default gateway to the IP of the new access point. It changes the destination MAC address on its 802.11 frames.

A network technician has successfully connected to the employee SSID via 802.1X. Which RADIUS message should you look for to ensure a successful connection?. Authorized. Access-Accept. Success. Authenticated.

When using the OSPF dynamic routing protocol on an Aruba CX switch, what must match on the neighboring devices to exchange routes?. DR configuration. Hello timers. BDR configuration. ECMP method.

What is the correct command to add a static route to a class-c-network 10.2.10.0 via gateway of 172.16.1.1?. ip route 10.2.10.0 255.255.255.0 172.16.1.1 description aruba. ip route-static 10.2.10.0 255.255.255.0 172.16.1.1. ip route 10.2.10.0/24 172.16.1.1. ip-route 10.2.10.0/24 172.16.1.1.

What does a slow amber-flashing Stack-LED indicate?. Stacking is synchronizing. Please wait. One switch has a stacking failure. Stacking mode selected. A port has a stacking failure. Stacking mode is not selected.

Where can you set the client's broadcast domain when configuring an ArubaOS firewall role?. Access Control Rules. WLAN Settings. Bandwidth Controls. Role-based VLAN override.

You need to ensure that voice traffic sent through an ArubaOS-CX switch arrives with minimal latency. What is the best scheduling technology to use for this task?. Strict queueing. Rate limiting. DWRR queuing. QoS shaping.

Based on the "show ip route" output on an Aruba CX 6200, what type of route is "10.1.1.0/2, vrf default via vlan1, [0/0]"?. static. connected. local. unknown.

Which part of the WPA Key Hierarchy is used to encrypt and/or decrypt data?. Pairwise Temporal Key (PTK). Key Confirmation Key (KCK). Pairwise Master Key (PMK). number used once (nonce).

What will perform a hard reset of an Aruba CX switch?. Press the reset button and the clear button simultaneously. Press the reset button three times. Press the reset button and hold the clear button while releasing the reset button for 5 seconds. Press and hold the reset button for 5 seconds, then release.

Which authentication does Aruba's Captive Portal use?. 802.1X authentication. Layer 2 authentication. MAC authentication. Layer 3 authentication.

A hacker has altered a user's 3-Way Handshake in order to gain access to their session. Which security mechanism would intelligently deny this traffic?. Stateful firewall. Access Control List (ACL). Stateless firewall. Out-of-band management (OOBM).

What is the recommended UXI monitoring solution in large logistic facilities?. Use a special ruggedized UXI sensor. Add a UXI sensor in every aisle of the logistic space. Use the UXI App direct on Zebra scanning devices running on Android. Use the UXI App on all handheld devices running on Windows CE.