Test I Integración

You try to activate a master data type where you added a key attribute and receive the following error message: "Cannot add attribute & 1 as key attribute." What could be the reason?. The attribute is a decimal data type so it CANNOT be used as a key attribute in the master data. The attribute was set up as an attribute as key figure and CANNOT be used as a key attribute. The master data type is a simple master data and CANNOT have more than 1 key attribute. Data already exists for the master data type and NO data is available yet for the new key attribute.

Which of the following algorithms can be used to forecast trends? Note: There are 2 correct answers to this question. Automated exponential smoothing. Adoptive response rate single exponential smoothing. Triple exponential smoothing. Weighted moving average.

Which of the following are prerequisites to create a copy operator? Note: There are 2 correct answers to this question. The source key figure can be a helper key figure. The source key figure can be stored or calculated and the target key figure must be calculated. The source and target key figure must belong to the same version. The source key figure can be calculated and the target key figure must be stored.

What global configuration parameter can be used to limit the number of planning versions in a system?. PLAN_VIEW->PV_COUNT_MAX. SCENARIO->SCN_COUNT_MAX. ANALYTICS->MAX_RECORDS. MASTER_DATA_OP->MAX_BATCH_SIZE.

What happens to data when a simulation is executed? Note: There are 2 correct answers to this question. A simulation holds data only as long as the planning view is open or until the data is saved. A simulation propagates the data across all planning views in one workbook. A simulation recalculates the data of all the key figures that were changed manually before simulation execution. A simulation persists the data in the SAP HANA database which increase the data stored.

Which integration technologies can be used with response management? Note: There are 2 correct answers to this question. Note: There are 2 correct answers to this question. ETL. CIF. CPI-DS(HCI-DS). SDI.

Which of the following objects can you enable for change history? Note: There are 2 correct answers to this question. Planning area. Key figure. Master data. Planning level.

The Following key figures are defined on defined different base planning levels (root attributes in brackets): KF1 at PERPRLOC (PRDID'LOCID) KF2 at PERPRDLOCCUST (PRDID' LOCID'CUSTID) KF3 at PERLOCCUST (LOCID'CUSTID) Which of the following configuration of the disaggregation operator are valid? Note: There are 2 correct answers to this question. KF2 to KF3 using PRDID attribute. KF1 to KF3 using CUSTID attribute. KF3 to KF2 LOCID attribute. KF1 to KF2 using PRDID attribute.

The Manage Process Templates and Manage Processes apps are introduced with IBP 1711 and are used together. They cover the same feature scope as the existing Process Modeling app and offer improved usability. Additionally, they include the following new features for enhanced process modeling and process management: Note: There are 4 correct answers to this question. Gantt Chan. Process Modeling. Consideration of selected workdays. Time zone settings. Managing and monitoring process life cycles in the Manage Processes app in addition to the monitoring features provided by the process chart in the dashboard.

You can use this app to create planning process templates, instances, work flows, and steps to track your progress in the planning process for Key Features: Note: There are 3 correct answers to this question. Create distance. Create process templates. Create steps and add them to a process template. Create process instances.

You receive the following error during calculation creation: The union of attributes of all input planning levels should be equal to all attributes of output planning level. What are the potential options to modify and fix the calculation? Note: There are 2 correct answers to this question. Add an input key figure with additional attributes. Create an additional calculation at the output planning level. Check that the attributes of all planning levels are aligned. Use an aggregation operator in the calculation.

You have collaboration enabled. What do you have to do to configure a process template?. Create a Dashboard. Create a Process Instance. Create an SAP Jam group. Create a Chart.

What can you do with business roles and business catalogs? Note: There are 3 correct answers to this question. Define restrictions for the business catalogs. Assign business users to the business roles. Assign business users to the business catalogs. Create business roles based on business catalogs. Define restrictions for the business roles.

What are some of the capabilities of SAP Integrated Business Planning for sales and operation? Note: There are 2 correct answers to this question. It provides recorder point recommendations. It supports balancing of demand, supply, and financial. It provides simulation and what-if planning capabilities. It creates a finite supply plan, considering capabilities.

You have demand at the PERPRODCUST already available in your planning area. You want to calculate the total demand at a location on a specific resource from a certain product. Which planning levels do you need to create?. PERPRODLOC and PERLOCERS. PERPRODLOCCUST and PERPRODLOCRES. PERPRODLOCCUST, PERPRODLOC, and PERPRODLOCRES. PERPRODCUST, PERPRODLOC, and PERLOCRES.

Which of the following are functions of response management? Note: There are 2 correct answers to this question. Improved short-term forecast accuracy. Calculation of allocations. Profit maximization. Priority rules-based planning.

With the IBP Excel add-in version 1711.2.0, you can display and work on the tasks that you have set up in the Process Modeling app and in Collaboration, directly from the IBP Excel add-in. To do so, click the Tasks button in the ribbon, which opens the Processes and Tasks dialog containing a list of your open tasks. You can move the dialog anywhere on your screen that best suits the way you work. You can choose to group your tasks based on the following criteria: Note: There are 3 correct answers to this question. Priority. Process. Due date. Move a tile.

Which operators must use the Unit of Measurement attribute and value if the input key figure is using Unit of Measure conversion? Note: There are 2 correct answers to this question. Disaggregation operator. Snapshot operator. Statistical forecasting operator. Advanced simulation operator.

In key figure display settings, what does Display as Percentage affect?. Formatting in Microsoft Excel planning view. Formatting in Analytics. Formatting in Microsoft Excel planning view chart. Formatting in Data Integration.

Integrate with Legal Content Management to enable customers to manage processes related to the creation and governance of legal content. The legal content produced due to Leasing Contract management business scenarios is integrated into the central repository provided by the Legal Content Management as a single source of truth for all legal documents. True. False.

You are configuring Unit of Measure conversion. What can you use in the configuration for the source of conversion?. Use the unit of Measure Conversion Factor attribute key figure as the source of conversion. Create a base Unit of Measure as time independent key figure and use it as the source of conversion. Use the Product ID belonging to Product master data type as the source of conversion. Use the UOMID belonging to Unit of Measure master data type as the source of conversion.

A user wants to save the changes they made to an active plan to share them with individual users without updating the active plan. What function should they use?. Advanced Simulation operator. Scenario. Simulation. Version.

Which of the following attributes types can be used in the result of a disaggregation expression? Note: There are 2 correct answers to this question. TIMESTAMP. DECIMAL (18,6). INTEGER. NVARCHAR.

What are the minimum prerequisites to activate a planning area? Note: There are 2 correct answers to this question. The planning area must have at least one helper key figure. The planning area must have at least one calculated key figure. The planning area must have a time profile assigned. The planning area must have at least one stored key figure.

Which of the following objects can you activate independently? Note: There are 2 correct answers to this question. Master data types. Time profile. Attributes. Planning.

How can you purge key figure data? Note: There are 3 correct answers to this question. Use purge Non-Configuration Data Application Job. Use SAP Fiori App Data Integration Jobs. Use version management in Microsoft Excel. Use scenario management in Microsoft Excel. Use Purge Key Figure Data Application Job.

Which of the following are SAP's responsibilities in an SAP Integrated Business Planning installation? Note: There are 3 correct answers to this question. Installation of hot-fix collections. Business user maintenance. Automated proactive system monitoring. System provisioning. External systems connection setup.

Which default values can be set in the Settings in SAP Integrated Business Planning, add-in for Microsoft Excel? Note: There are 3 correct answers to this question. Key figures. Currency TO ID. Selection ID. Time zone. Language.

In SAP Fiori launched, under the user Preferences title, you can select the default planning area. Where is the planning area setting used?. In the upload key figures screen of the SAP Fiori Data Integration Jobs title. In the new job creation of the SAP Fiori Application jobs title. In the connection manager of SAP Integrated Business Planning, add-in for Microsoft Excel. In the planning area section of the SAP Fiori Configuration title.

Which of the following are properties of helper key figures? Note: There are 3 correct answers to this question. Can be system editable. Are used only for calculation. Can be used at any planning level. Do not have a base planning level. Can be displayed in a planning view.

Which of the following steps are part of typical S&OP process? Note: There are 2 correct answers to this question. Product review. Demand-supply matching. Order reconfiguration. Run and review inventory plan.

How many input planning levels can a calculation include?. There are no restrictions on the number of input planning levels. The number of input planning levels depends on the key figure type. There can be only 1 input planning level. There can be no more than 2 different input planning levels.

What task can be performed when using the Purge Key Figure Data application job?. Purge all key figure data for a specific planning level and planning version. Purge all key figure data and master data for a specific planning level. Purge key figure data for o specific key figure and all dependent key figures. Purge key figure data for specific key figure before a certain period.

You have a time profile defined with the levels Day, Week, Month, Quarter and Year. What does PERIODID2 stand for?. Quarters. Months. Years. Weeks.

KEYFIGURE1 is disaggregated with a disaggregation expression. Which rules are applied to this disaggregation expression? Note: There are 3 correct answers to this question. Key figures in the disaggregation expression must have a calculation defined at the base planning level. Key figures in the disaggregation expression must be stored key figures. Attributes in the disaggregation expression must be from the base planning level of KEYFIGURE1. Key figures in the disaggregation expression must have the same base planning level as KEYFIGURES1. Key figures in the disaggregation expression must contain any non-null data.

Which functional modules belong to SAP Integrated Business Planning? Note: There are 2 correct answers to this question. SAP Jam Collaboration. SAP Supply Chain Control Tower. SAP Cloud Platform Integration. SAP Integrated Business Planning for sales and operations.

You are configuring currency conversion. Where should you set up the conversion target and conversion source attributes?. In the EXCHANGERATE master data type. In the CURRENCYTO and in the CURRENCYFROM master data types. In the Planning Levels configuration screen. In the Planning Area and Details configuration screen.

Which prerequisites must be met to run statistical forecasting? Note: There are 3 correct answers to this question. The user has proper authorizations. The Forecast model is defined. The Forecast global parameters are set. The Forecast operator is assigned to the planning area. Planning objects are assigned to the Forecast model.

What are the main outputs that are calculated by the SAP Integrated Business Planning for Inventory? Note: There are 3 correct answers to this question. Recommended safety stock. Projected stock. Reorder point. Minimum internal service level. On-hand stock.

Which settings are stored when save a planning view template? Note: There are 3 correct answers to this question. Currency to ID. Planning level. SAP Jam group. Version and scenario. Folder for planning view.

KEYFIGURE1 is a time-independent key figure. What is relevant for KEYFIGURE1? Note: There are 3 correct answers to this question. KEYFIGURE1 can be edited under Master Data Maintenance in the SAP integrated Business Planning, add-in for Microsoft Excel. KEYFIGURE1 consumes the same amount of database space as a time-dependent Attribute as key figure. KEYFIGURE1 CANNOT be displayed in the Microsoft Excel planning view. Base planning level of KEYFIGURE1 can include time attributes as root attributes. Data can be uploaded to KEYFIGURE1 if it was configured as Attributes as key figure.

What can you format in the planning view using the EPM formatting sheet? Note: There are 3 correct answers to this question. Local members. Data or header in rows or columns. Visibility filters. Planning view charts. Specific key figures.

Which data types are available for attribute creation? Note: There are 2 correct answers to this question. External. Virtual. Integer. Nvarchar.

You have demand at the PERPRODCUST already available in your planning area. You want to calculate the demand at a location on a specific resource from a certain product. Which objects do you need to create? Note: There are 2 correct answers to this question. Copy operators. Planning levels. Versions. Key figures.

A time profile has Day, Technical week, Calendar week, Month, Quarter and Year attributes. KF1 contains sales Data and KF2 contains forecast data. KF1 and KF2 are defined on the Planning level with Month as a root attribute. You want to display sales data in the past and forecast data for current and future periods in KF3. What should the calculation for KF3 at base planning level be?. IF("PERIODID3""<"$$PERIDID3CU$$","KF2"). IF("PERIODID4"<=$$PERIODID4CU$$","KF1","KF2"). IF("PERIODID3">"$$PERIODID3CU$$","KF2","KF1"). IF("PERIODID2">="$$PERIODID2CU$$","KF2","KF1").

Versions, scenarios, and simulations are all similar, with some slight differences. What functionality is common to all three?. Accessible by 011 users. Is stored in the database. Can use the entire data set for calculations. Can be used in analytics and planning views.

A customer is looking for a solution that improves the forecast, coordination, and collaboration between departments to create a consolidated long-term supply plan, considering capacities. Which planning solutions do you recommend to the customer? Note: There are 2 correct answers to this question. Response management. Inventory optimization. Sales and operations planning. Supply optimizer.

Which of the following ore required to set up the connection to SAP Integrated Business Planning in Microsoft Excel? Note: There are 3 correct answers to this question. Microsoft Excel 2017 is installed. Planning version is entered. SAP Integrated Business Planning, odd-in for Microsoft Excel is installed. Planning area ID is selected. Server IJRL is entered.

What happens when you use the Replace option while loading master data via a CSV file in SAP integrated Business Planning?. Master data in the CSV file will only replace same data with matching keys. All existing data will be purged with no data remaining. Data with matching keys is untouched and all other data is replaced. Master data in the CSV file will replace all existing data and will purge all other entries.

When you run the S&OP (SCM) operator with the explanation parameter, the IBP Excel add-in now displays the business log on multiple worksheets, which it creates based on the different business problems they contain. True. False.

Within the framework of demand planning, you use statistical forecasting to generate forecasts for various scenarios or for specific parts of your business. SAP Integrated Business Planning supports interactive statistical forecasting and planning for the following areas: Note: There are 4 correct answers to this question. Demand sensing. Income forecasting. Statistical forecasting. Quantity forecasting. Price and revenue forecasting.

Which master data types can you reference to create a reference master data type? Note: There are 2 correct answers to this question. Simple. Compound. Virtual. Reference.

Key figure DISACC is using key figures KFI and KF2 in the disaggregation expression. What properties are valid for these key figures?. KFI and KF2 can be Alert key figures. DISACC can be an Alert key figure. DISAGG can be a Snapshot key figure. KFI and KF2 can be Snapshot key figures.

You log on the Microsoft Excel user interface for the SAP Integrated Business Planning applications for supply chain management. What protocol is used to exchange authentication and authorized data between the identity provider and the services provider?. SSO. XML. HTTPS. SAML2.

You are creating a drill down using the Analytics Advanced application. Which of the following activities can you perform? Note: There are 3 correct answers to this question. Change the initially selected planning area. Group the data by attributes. Add or remove helper key figures. Modify or change the chart type. Add or remove stored/calculated key figures.

Which planning algorithms use costs as input? Note: There are 2 correct answers to this question. Inventory Optimization: Global (multi-stage) inventory optimization. Order-based Planning: Deployment Run. S&OP Operator: Supply Optimizer. Order-Based Planning: Constrained Forecast Run.

You want to copy values from KF1 to KF2. Which of the following parameters are mandatory to create a copy operator to perform this copy? Note are 2 correct answers to this question. TARGET_KFID1. DURATION. SOURCE_KFID1. TARGETKFID2.

In which sample planning areas can you perform inventory optimization? Note: There are 2 correct answers to this question. SAP5. SAP3. SAPIBPI. SAP74.

Which of the following SCOR cash KPIs are included in the SAP Supply Chain Control Tower? Note: There are 2 correct answers to this question. Supply shortage. Cost of goods sold. Delivery item accuracy. Finished goods inventory value.

In which forecast models can the alpha parameter be used in the Manage Forecast app? Note: There are 2 correct answers to this question. Weighted average. Double exponential smoothing. Triple exponential smoothing. Weighted moving average.

Which SAP Fiori apps belong to Identity and Access Management (IAM)? Note: There are 3 correct answers to this question. Custom Business objects. User Preferences. Display Technical Users. Business Role Templates. Business Catalogs.

They key figures DISAGG user KF1 in its disaggregation expression. What settings must apply to key figure KF1? Note: There are 2 correct answers to this question. It can be stored and calculated, but the calculated value is used in disaggregation. It can be at a more detailed planning level than key figure DISAGG. It must be a stored key figure. It can be stored and calculated, but the stored value is used in disaggregation.

TO which objects can a visibility filter be assigned? Note: There are 3 correct answers to this question. User settings. Business user. User group. Business catalog. Business role.

KEY FIGURES AND ATTRIBUTES A planning area has a time profile with Day, Technical week, Calendar week, Month, Quarter, and Year attributes. The base planning level Of KEYFIGURE1 only has a Month attribute. You want to shift KEYFIGURE1 for one year. What should the attribute transformation be?. "PERIODID1"+12. "PERIODID3"+12. "PERIODID2"+12. "PERIODID4"+12.

What are the key functional capabilities of the SAP Integrated Business Planning for Demand? Note: There are 2 correct answers to this question. Selection of the best forecasting model based on forecasting accuracy metrics. Collaboration between demand planners in the demand planning process. Automated correction of outfitters and missing values based on algorithms from the Predictive Analytics Library. Generation of Fiori-based alerts on long-term forecasting results.

Which of the following functionalities are enabled only when SAP Jam is integrated with the SAP Integrated Business Planning applications for supply chain management? Note: There are 3 correct answers to this question. Task management. Users thumbnail photo. Custom alerts. Activity feed. Process modeling.

You are using the Data Integration jobs title to load key figure data via a CSV file. What format should be used the key figure data? Note: There are 2 correct answers to this question. DD-MM-YYYY. YYYY MM DD hh:mm:ss.000. MM-DD-YYYY hh:mm:ss:000. YYYY-MM-DD.

In Microsoft Excel, you have favorites that you have created and favorites that have been shared with you. What will be displayed when you access the Favorites tile from the Web user Interface?. Only the favorites you created in the default planning area assigned in the User Preferences tile. The favorites you created and the favorites shared with you from all the planning areas available in the system. Only the favorites you created from 011 the planning areas available in the system. The favorites you created and the favorites shored with you in the default planning area assigned in the User Preferences tile.

After you have run the time-series-based supply planning optimizer in the IBP Excel add-in, you can now display explanations for the following types of results in the business log: Note: There are 3 correct answers to this question. 8nsatLsfied demands. Rename a tile. Violated inventory targets. Violated adjusted values.

Where do you enable the linkage between the attributes and descriptions of attributes?. In the Attributes app. In the Master Data Types app. In the Configuration app on the planning level definition screen. In the Configuration app on the planning area definition screen.

A planning area has a time profile with PERIODID, technical week, calendar week, month, quarter, and year attributes. KEYFIGURE1 is only valid an a monthly level. What would you select as attributes in the planning level to prevent displaying of invalid values?. Month, year. PERIODID. Technical week, month. Month.

Which of the following are properties of alert key figures? Note: there are 2 correct answers to this question. They are created in configuration. They do NOT require activation. The trigger an alert notification in the Microsoft Excel IBP ribbon. They are assigned to any planning view.

You are creating an ABC Segmentation profile. Which methods can you use? Note: There are 2 correct answers to this question. By segmentation of time-independent penalty casts in percentage or value. By segmentation measure in percentage or value. By number of items in percentage or value. Classification by non-delivery cast in percentage or value.

What is the minimum number of active calculations that a key figure can have?. There can be no fewer than 2 active calculations. The number of active calculations depends on the key figure type. There must be at least 1 active calculation. There are no restrictions on the number of active calculation for key figures.

Why would you use a virtual master data types?. To create a join between two or more master data types. To references a master data from an external source. To combine two or more independent simple master data types. To reference an existing master data type.

You are logged in to a planning area in Microsoft Excel. Where can you see the release of the back-end system in the About section of the IBP ribbon?. Hover over Message History. Hover over Help. In Help->Log. In Help->About.

What happens if more than one role or more than one visibility filter is assigned to a user? Note: There are 2 correct answers to this question. All access rights for the first visibility filter with the lowest ID are used. All planning data in the union of all visibility filters from all roles apply. All planning data is restricted to the role in which the visibility filter is assigned. All access rights in the union of all roles apply.

What are the key capabilities that are delivered with SAP Supply Chain Control Tower? Note: There are 3 correct answers to this question. Pre-defined supply chain KPIs. Case management. Custom alerts and exceptions handling. Process management. Forecasting accuracy measurements.

What prerequisite must be met before you can execute a simulation in Microsoft Excel?. A scenario other than BASELINE must be created. A planning view must be opened or created. Authorization must be provided to create a planning view template. At least one additional version for the applicable planning area must be configured.

What happens when an ID and an attribute description are linked? Note: There are 3 correct answers to this question. Descriptions must be included in the planning area before you can use them in Microsoft Excel. Downloaded data volume during logon to Microsoft Excel is reduced. Both description and ID can be displayed in the same field in Microsoft Excel. Sorting is always by ID, regardless if you select ID or description in Microsoft Excel. Descriptions must be included in the planning levels before you can use them in Microsoft Excel.

How can you enhance the planning view in Microsoft Excel? Note: There are 3 correct answers to this question. Format key figures and headers. Set up a custom alert with analytics. Create local key figures with formulas. Display a chart with filters. Create a poll with SAP Jam functionality.

You are configuring c calculated key figure: KF3@PERPRODCUST = KFI@PERPRODCUST + KF2@PERPRODCUST, where KFI is Stored and KF2 is calculated. You receive this error message while performing planning area activation: E - Calculation KF3@PERPRODCUST; KFI@PERPRODCUST must be stored or a calculation must exist. How can you solve this issue and ensure successful activation of the planning area?. Change the edit mode to system editable. Delete KFI and recreate it as attribute as key figure. Change the base planning level for KF1. Flag KF1 as stored in the Input Key Figures dialog box.

You are loading data in a planning area for first time. In what Order should the data to be loaded to ensure a successful load?. 1. Master data 2. Key figures 3. Time profile. 1. Time Profile 2. Key figures 3. Master data. 1. Key figures 2. Time profile 3. Master data. 1. Time profile 2. Master data 3. Key figures.

What can you view in a Dashboard? Note: There are 2 correct answers to this question. Process Templates created in Process Modeling. Process Instances created in Process Modeling. Jobs created using the Application Jobs tile. Charts created in the Analytics application.

New key figures were introduced. You can use them in the IBP Excel add-in to set the maximum supply quantity to be transferred, purchased, or produced. If constraints make it impossible to reach this upper limit, as much as possible will be transferred, purchased or produced. If you set this value to 0, then this is the maximum supply quantity. The following are the new key figures in the SAP7 sample planning area: Note: There are 2 correct answers to this question. Adjusted Distribution Receipt (Lane) (ADJUSTEDDISTRRECEIPTLXNE): this is a stored key figure containing the adjusted value for the receipt quantity of a material distributed from a ship-from location of the type plant to a ship-to location of the type plant. If mapped to the corresponding business meanings, it can be used to adjust the number of stock transfers and purchases. For-matting in Microsoft Excel planning view chart. Adjusted Production Receipt (PDS) (ADJUSTEDPRODRECEIPTPDS): this is a stored key figure containing the adjusted value for a production quantity for a specific production data source.

When should you use two single quotation marks before and after an object in key figure calculations?. For attribute value reference. For calculation at request level. For key figure value reference. For reference to key figures.

Which planning operators use finite production capacities as input? Note: There are 2 correct answers to this question. S&OP Operator: Supply Optimizer. Inventory Optimization: Global (multi-stage) inventory optimization. Inventory Optimization: Decomposed (single-stage) inventory optimization. Order-Based Planning: Constrained Forecast Run.

Process chevrons can be added to existing dashboards in the Advanced Dashboards application. What do the S&OP Process chevrons represent?. Milestone steps in an organization's S&OP project. Milestone steps in an organization's S&OP process. Milestone steps that can be configured in an S&OP application. Milestone steps represented in a dashboard in S&OP.

What can you do with the Sales and Operations Planning heuristic? Note: There are 2 correct answers to this question. Create a supply plan. Perform multi-level planning. Execute priority rules based planning. Run order-based planning.

What can you do with master data in the SAP IBP add-in for Microsoft Excel? Note: There are 2 correct answers to this question. Create planning version. Create and maintain master data. Delete key columns. Adjust time profile in the planning view. Add a new combination of attributes to the planning view.

What should be the last step in a calculation graph if there is NO attribute transformation?. Attribute as key figure. Stored key figure. Helper key figure. Calculated key figure.

Which of the following actions can you perform in SAP Fiori launchpad by using the Edit Home Page button? Note: There are 3 correct answers to this question. Add or remove a tile to/from a group. Change the display image of a tile. Rename a tile. Create a new tile. Move a tile.

What are the main benefits of using SAP IBP Control Tower? Note: There are 3 correct answers to this question. Gain holistic visibility across internal and external supply chain planning and execution systems and networks. Collaborate, communicate and monitor performance of the supply chain. Understand the impacts and cause of exceptions, and take action to solve the problem. Control which orders are going to be processed first by assigning rank via priority. To create suitable application job chains.

What must you use to integrate order data into SAP IBP?. Web UI data Load. Cloud Platform Integration for Data Service. Smart Data Integration. Microsoft Excel UI.

Which algorithm type can you use to plan the supply?. Time-series based optimizer. Statistical forecasting. Local updates. Compute quotas.

Which of the following chart types can be used to represent distribution in the Advanced Analytics application? Note: There are 2 correct answers to this question. Dual Stacked Column. Heat map. Scatter. Dual Y-Axis Line.

What can you change without requiring activation of the planning area?. Attribute type. Key figure description. Key figure calculation. Key figure base planning level.

You are creating a Handling resource. What Resource Type do you need to specify?. 2. 4. 1. 0.