TEST JULIAN

Given the configuration shown in the exhibit, what can you conclude from the installation targets in the Install On column? (Choose two.). C. Policy seq.# 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets. Most Voted. D. Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target. E. Policy seq # 1 will be installed on the Remote-FortiGate root[NAT] and Student[NAT] VDOMs only. Most Voted. B. Policy seq.# 3 will be skipped because no installation targets are specified. A. Policy 3 will be installed on all FortiGate devices and vdom belongs to the ADOM.

When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?. FortiGate will reject the CLI commands that will cause the tunnel to go down. FortiManager will revert and install a previous configuration revision on the managed FortiGate. FortiManager will not push the CLI commands as part of the installation that will cause the tunnel to go down. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

Which two statements about the scheduled backup of FortiManager are true? (Choose two.). It can be configured using the CLI and GUI. It does not back up firmware images saved on FortiManager. It backs up all devices and the FortiGuard database. It supports FTP, SCP, and SFTP.

According to the error message, why is FortiManager failing to add the FortiAnalyzer device?. The administrator must use the correct user name and password of the FortiAnalyzer device. The administrator must turn off the Use Legacy Device login and add the FortiAnalyzer device to the same network as FortiManager. The administrator must use the Add Model Device section and discover the FortiAnalyzer device. The administrator must select the FortiManager administrative access checkbox on the FortiAnalyzer management interface.

Which two conditions trigger FortiManager to create a new revision history? (Choose two.). When FortiManager is auto-updated with configuration changes made directly on a managed device. When changes to the device-level database are made on FortiManager. When FortiManager installs device-level changes on a managed device. When a configuration revision is reverted to a previous revision in the revision history.

You are moving managed FortiGate devices from one ADOM to a new ADOM. Which statement correctly describes the expected result?. The shared device settings will be installed automatically. Any unused objects from a previous ADOM are moved to the new ADOM automatically. The shared policy package will not be moved to the new ADOM. Policy packages will be imported into the new ADOM automatically.

An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. Which two results can the administrator expect to happen? (Choose two.). FortiManager will temporarily change the status of the referenced firewall policy. FortiManager will disable the status of the address object. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy. FortiManager will not allow the administrator to delete a referenced address object until the ADOM is locked.

An administrator runs the Policy Check feature on FortiManager ADOM. What will be the result?. It will find and provide recommendations to combine multiple separate policy packages into one common policy package. It will find and merge duplicate policies in the policy package. It will find and provide recommendations for optimizing policies in a policy package. It will find and delete disabled firewall policies in the policy package.

An administrator created a header and footer global policy package and assigned it to an ADOM. What are two outcomes from this action? (Choose two.). You must manually move the header and footer policies after the policy assignment. After you assign the global policy package to an ADOM, the policy package is hidden from the ADOM and cannot be viewed. If you assign an additional global policy package to the same ADOM, FortiManager removes previously assigned policies. You can edit or delete all the global objects in the global ADOM.

An administrator is replacing a failed device on FortiManager by running the following command: execute device replace sn <devname> <serialnum>. Which device name and serial number must the administrator use?. The device name of the new device and serial number of the failed device. The device name and serial number of the failed device. The device name of the failed device and serial number of the new device. The device name and serial number of the new device.

How will FortiManager try to get updates for antivirus and IPS?. From the list of configured override servers or public FDN servers. From the default server fds1.fortinet.com. From the configured override server IP address 10.0.1.50 only. From public FDNI server IP address with the fourth highest octet only.

Which two statements about the output are true? (Choose two.). Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed. The latest revision history for the managed FortiGate does match the FortiGate running configuration. Configuration changes directly made on FortiGate have been automatically updated to the device-level database. The latest revision history for the managed FortiGate does not match the device-level database.

Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.). You must create an MEA special policy on FortiManager using the super user profile. You must open the ports to the Fortinet registry. When you configure MEA, you must open TCP or UDP port 540. The administrator must have the super user profile.

Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two.). Unlocking an ADOM will submit configuration changes automatically to the approval administrator. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out. The same administrator can lock more than one ADOM at the same time. Unlocking an ADOM will install configuration changes automatically on managed devices.

An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?. When a new policy package is created, the administrator must import the global policy package to ADOM1. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package. When a new policy package is created, the administrator must assign the global policy package from the global ADOM. When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package.

On FortiManager, an administrator created a new system template named Training with two new DNS addresses. During the installation preview stage, the administrator notices that central-management settings need to be purged. What can be the main reason for the central-management purge command?. The Remote-FortiGate device does not have any DNS server-list configured in the central-management settings. The DNS addresses in the default system settings are the same as the Training system template. The ADOM is locked by another administrator. The Training system template has a default FortiGuard widget.

Which statement is true about the FortiManager ADOM policy tab based on the API request?. The API command has enabled both central NAT and interface policy on the policy tab. The API command has requested the policy tab permissions information only. The API command has failed when requesting policy tab permissions information. The API command has applied to customer with ID: 200.

What will happen if FortiAnalyzer features are enabled on FortiManager?. FortiManager will keep all the logs and reports on the FortiManager. FortiManager will install the logging configuration to the managed devices. FortiManager can be used only as a logging device. FortiManager will enable ADOMs to collect logs automatically from non-FortiGate devices.

An administrator would like to review, approve or reject all the firewall policy changes made by the junior administrators. How should the workspace mode settings be configured on FortiManager?. Set to normal and using the approval group feature. Set to read/write and using the policy locking feature. Set to workflow and using the ADOM locking feature. Set to workspace and using the policy locking feature.

What will happen if the script is run using the Remote FortiGate Directly (via CLI) option? (Choose two.). FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate. FortiManager will create a new revision history. FortiGate will auto-update the FortiManager device-level database. You must install these changes using the Install Wizard.

In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices only. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric. Given the administrator’s actions, which statement correctly describes the expected result?. The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only. The authorized FortiGate will appear in the root ADOM. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors. The authorized FortiGate will be automatically added to the Training ADOM.

In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA manual mode to a working state?. The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration. Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed device. Reconfigure the primary device to remove the peer IP of the failed device. Reboot the failed device to remove its IP from the primary device.

Which three settings are the factory default settings on FortiManager? (Choose three.). The administrative domain is disabled. The Port1 interface IP address is 192.168.1.99/24. Management Extension applications are enabled. The FortiManager setup wizard is disabled. FortiAnalyzer features are disabled.

A junior administrator is troubleshooting a FortiManager connectivity issue that is occurring with managed FortiGate devices. Given the FortiManager device manager settings shown in the exhibit, what can you conclude from the exhibit?. FortiManager lost internet connectivity, therefore, both devices appear to be down. The administrator must refresh both devices to restore connectivity. The administrator had restored the FortiManager configuration file. The administrator can reclaim the FGFM tunnel to get both devices online.

What can you conclude from the failed installation log shown in the exhibit?. Policy ID 2 will not be installed. Policy ID 2 is installed in the disabled state. Policy ID 2 is installed without a source address. Policy ID 2 is installed without the remote user student.

Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database. FortiManager ignored the firewall service category General and did not update its database with the value. FortiManager ignored the firewall service category General but created a new service category in its database. FortiManager ignored the firewall service category General and deleted the duplicate value in its database.

An administrator is in the process of moving the system template profile between ADOMs by running the following command: execute fmprofile import-profile ADOM2 3547 /tmp/myfile Where does the administrator import the file from?. File system. ADOM1. ADOM2 object database. ADOM2.

What does a policy package status of Never Installed indicate?. The policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager. FortiManager is unable to determine the policy package status. The policy configuration has been changed on FortiManager and changes have not yet been installed on the managed device. The policy package was never imported after a device was registered on FortiManager.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.). During discovery, the FortiManager NATed IP address is not set by default on FortiGate. If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel. FortiGate is discovered by FortiManager through the FortiGate NATed IP address. FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management.

An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?. The unused objects that are not tied to the firewall policies will be installed on FortiGate. The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate. The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted. The unused objects that are not tied to the firewall policies in policy package will be deleted from the FortiManager database.

How will FortiManager try to get updates for antivirus and IPS?. From the list of configured override servers with ability to fall back to public FDN servers. From the configured override server list only. From the default server fdsl.fortinet.com. From public FDNI server with highest index number only.

Why it is failing to import firewall policy ID 2?. The address object used in policy ID 2 already exist in ADOM database with any as interface association and conflicts with address object interface association locally on the FortiGate. Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGat.

Which two statements are true if the script is executed using the Device Database option? (Choose two.). You must install these changes using the Install Wizard to a managed device. The successful execution of a script on the Device Database will create a new revision history. The script history will show successful installation of the script on the remote FortiGate. The Device Settings Status will be tagged as Modified.

Which two statements regarding device management on FortiManager are true? (Choose two.). FortiGate devices in HA cluster devices are counted as a single device. FortiGate in transparent mode configurations are not counted toward the device count on FortiManager. FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices. The maximum number of managed devices for each ADOM is 500.

Which two statements about Security Fabric integration with FortiManager are true? (Choose two.). The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration. The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices. The Security Fabric settings are part of the device level settings. The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices.

Which statement is true regarding this failed installation log?. Policy ID 2 is installed without a source address. Policy ID 2 will not be installed. Policy ID 2 is installed in disabled state. Policy ID 2 is installed without a source device.

Which statement about the object named ALL is true?. FortiManager updated the object ALL using the FortiGate value in its database. FortiManager installed the object ALL with the updated value. FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate. FortiManager updated the object ALL using the FortiManager value in its database.

What is the purpose of setting ADOM Mode to Advanced?. The setting allows automatic updates to the policy package configuration for a managed device. The setting enables the ADOMs feature on FortiManager. This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs. The setting disables concurrent ADOM access and adds ADOM locking.

An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session. What can prevent an admin account that has Super_User rights over the device from approving a workflow session?. Trainer is not a part of workflow approval group. Trainer does not have full rights over this ADOM. Trainer must close Student's workflow session before approving the request. Student, who submitted the workflow session, must first self-approve the request.

You are using the Quick Install option to install configuration changes on the managed FortiGate. Which two statements correctly describe the result? (Choose two.). It will not create a new revision in the revision history. It installs device-level changes to FortiGate without launching the Install Wizard. It cannot be canceled once initiated and changes will be installed on the managed device. It provides the option to preview configuration changes prior to installing them.

An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit. Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.). The administrator logged in using the unsecure protocol HTTP, so the view is restricted. The administrator profile does not have full access privileges like the Super_User profile. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces. FortiAnalyzer features are not enabled on FortiManager.

Which two items are included in the FortiManager backup? (Choose two.). FortiGuard database. Global database. Logs. All devices.

An administrator's PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash. How can the administrator unlock the ADOM?. Restore the configuration from a previous backup. Log in as Super_User in order to unlock the ADOM. Log in using the same administrator account to unlock the ADOM. Delete the previous admin session manually through the FortiManager GUI or CL.

Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.). It supports the FortiManager script feature. It allows making configuration changes for managed devices on FortiManager panes. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate. You cannot assign the same ADOM to multiple administrators.

A service provider administrator has assigned a global policy package to a managed customer ADOM named My_ADOM, which has four policy packages. The customer administrator has access onlytoMy_ADOM. How can customer or service provider administrators remove both global header and footer policies from the policy package named Shared_Package?. The service provider administrator can unassign both policies from the global ADOM. The service provider administrator can unassign both global policies from My_ADOM. The customer administrator can unassign both polices by locking My_ADOM. The customer administrator can unassign both global polices from My_ADOM.

Which of the following statements are true regarding reverting to previous revision version from the revision history? (Choose two.). To push these changes to a managed device, it required an install operation to the managed FortiGate. Reverting to a previous revision history will generate a new version ID and remove all other history versions. Reverting to a previous revision history will tag the device settings status as Auto-Update. It will modify device-level database.

An administrator with theSuper_Userprofile is unable to log in to FortiManager because of an authentication failure message. Which troubleshooting step should you take to resolve the issue?. Make sure FortiManager Access is enabled in the administrator profile. Make sure Offline Mode is disabled. Make sure the administrator IP address is part of the trusted hosts. Make sure ADOMs are enabled and the administrator has access to the Global ADOM.

An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate. In which database will the configuration be saved?. Device-level database. Revision history database. ADOM-level database. Configuration-level database.

A junior administrator is troubleshooting a FortiManager connectivity issue that is occurring with managed FortiGate devices. Given the FortiManager device manager settings shown in the exhibit, what can you conclude from the exhibit?. FortiManager lost internet connectivity, therefore, both devices appear to be down. The administrator must refresh both devices to restore connectivity. The administrator had restored the FortiManager configuration file. The administrator can reclaim the FGFM tunnel to get both devices online.

In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices only. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric. Given the administrator’s actions, which statement correctly describes the expected result?. The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only. The authorized FortiGate will appear in the root ADOM. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors. The authorized FortiGate will be automatically added to the Training ADOM.

Which two statements about the scheduled backup of FortiManager are true? (Choose two.). It can be configured using the CLI and GUI. It does not back up firmware images saved on FortiManager. It backs up all devices and the FortiGuard database. It supports FTP, SCP, and SFTP.

Which two conditions trigger FortiManager to create a new revision history? (Choose two.). When FortiManager is auto-updated with configuration changes made directly on a managed device. When changes to the device-level database are made on FortiManager. When FortiManager installs device-level changes on a managed device. When a configuration revision is reverted to a previous revision in the revision history.

2. Which two items does an FGFM keepalive message include? (Choose two.). FortiGate uptime. FortiGate license information. FortiGate IPS version. FortiGate configuration checksum.

Which two settings must be configured for SD-WAN Central Management? (Choose two.). SD-WAN must be enabled on per-ADOM basis. You can create multiple SD-WAN interfaces per VDOM. When you configure an SD-WAN, you must specify at least two member interfaces. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

What will happen if FortiAnalyzer features are enabled on FortiManager?. FortiManager will reboot. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices. FortiManager can be used only as a logging device.

In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?. Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.correct. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

An administrator would like to create an SD-WAN using central management in the Training ADOM. To create an SD-WAN using central management, which two steps must be completed? (Choose two.). Specify a gateway address when you create a default SD-WAN static route. Enable SD-WAN central management in the Training ADOM. Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings. Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces.

Which of the following statements are true regarding VPN Manager? (Choose three.). VPN Manager must be enabled on a per ADOM basis. VPN Manager automatically adds newly-registered devices to a VPN community. VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time. Common IPsec settings need to be configured only once in a VPN Community for all managed gateways. VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec.

What does a policy package status of Conflict indicate?. The policy package reports inconsistencies and conflicts during a Policy Consistency Check. The policy package does not have a FortiGate as the installation target. The policy package configuration has been changed on both FortiManager and the managed device independently. The policy configuration has never been imported after a device was registered on FortiManager.

An administrator has enabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface?. Allows FortiManager to download IPS packages. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices. Allows FortiManager to run real-time debugs on the managed devices. Allows FortiManager to automatically configure a default route.

Central Managment. It allows fortigate to unset central management settings. It allows fortigate to reboot and recover the previuos configuration from its configuration file. It allows the fortimanager to revert and install a previous configuration revision on the managed fortigate. It allows fortigate to reboot and restore a previously working firmware image.