Lagartija

The____________IS located in the tail cone. Radome. APU. Rat.

This image corresponds to... A320 Sidestick. A320 Control Wheel. A320 Flap Lever.

This image correspons to.... Stowage Bin. Automated Tool Control. Cabin Service Trolley.

On an Airbus A320, the_____ sits in the right-hand seat of the cockpit. Flight Engineer. Firs officer. Captain.

This is a Boeing approved plastic____. Calibrated Torque Wrench. Sealant Scraper. Ratchet Handle.

If you detect an unusual vibration coming from the APU, you should immediately ______ the system to prevent further damage. Shut down. Put away. Take off.

The aircraft was grounded immediately after the flight crew reported a significant_____in the landing gear deployment sequence during the final approach. Divergence. Discrepancy. Disparity.

Once the visual inspection is complete, ensure that all access panels _____ properly before signing the release document. Are securing. Are secured. Secures.

____the mechanic noticed the hairline crack on the pressure bulkhead during the walk-around, the catastrophic failure could have been averted. Provided. Unless. Had.

The aircraft cannot be dispatched for the scheduled flight _____ the engineering team replaces the faulty hydraulic pupm. Unless. Therefore. Instead of.

The aircraft maintenance manual (AMM) strictly dictates that the replacement valve____torqued to the precise specifications outlined in chapter 29. Being. Be. To be.

The wing surfaces develop aerodynamic forces ____ support the airplane in flight. Who. Whose. Which.

Do not touch hot parts___applicable gloves. Without. Outside. Missing.

Before you___ a check on a hydraulic system that___not operated, you must pressurize it. Doing /have. Do/has. Did/having.

_____to follow this warning could lead to serious injury or death. Fails. Failed. Failure.

The fligth deck overhead door rotates on a hinge mechanism that can___adjusted. Be. Been. Being.

The bulk cargo door is a manually ____plug-type door. Operating. Operates. Operated.

If the leakage rate ____ more that 30 drops, replace the actuator immediately. Is. Are. To be.

It is mandatory that no components_____ leaks which are more that 2 drops in 10 minutes. Has. Have. Having.

Stabilised operation of the engine____prohibited by the EEC, as the software____ the keep-out-zone for on-ground, static operation. Will be / includes. Would be / include. Is being / including.

Choose the correct sentence. Do not get hydraulic fluid in your skin. Do not get hydraulic fluid on your skin. Do not get hydraulic fluid at your skin.

Choose the correct sentence. The wing surfaces develop aerodynamic forces which support the airplane in flight. The wing surfaces develops aerodynamic forces which support the airplane in flight. The wing surfaces develop aerodynamic forces who support the airplane in flight.

Choose the correct sentence. Movement of fligth controls can cause injury to persons and/or damage to equipment. Movement of fligth controls can causes injury to persons and/or damage to equipment. Movement of fligth controls can causing injury to persons and/or damage to equipment.

Choose the correct sentence. Hydraulic tube connections seals when you force the metal surfaces. Hydraulic tube connections sealing when you force the metal surfaces. Hydraulic tube connections seal when you force the metal surfaces.

Choose the correct sentence. It is mandatory that the connections are tight and that you apply the correct torque value. It is mandatory that the connections is tight and that you apply the correct torque value. It is mandatory than the connections are tight and that you apply the correct torque value.

Choose the correct sentence. Before you do any rigging task, makes sure that the reservoir is properly serviced. Before you do any rigging task, make sure that the reservoir is properly serviced. Before you do any rigging task, make sure that the reservoir be properly serviced.

Choose the correct sentence. Make sure that the guide rollers smoothly disengages from the guide tracks. Make sure that the guide rollers smoothly disengage from the guide tracks. Make sure that the guide rollers smoothly disengaging from the guide tracks.

Choose the correct sentence. The total leak rate from all the components must not be more than 10 drops in 10 minutes. The total leak rate from all the components must not to be more than 10 drops in 10 minutes. The total leak rate from all the components must not being more than 10 drops in 10 minutes.

Choose the correct sentence. Failure to adhere to these preparation steps can result in incorrect rigging measurements due to fuselage twisting or sagging. Failure to adhere to these preparation steps can result on incorrect rigging measurements due to fuselage twisting or sagging. Failure to adhering to these preparation steps can result in incorrect rigging measurements due to fuselage twisting or sagging.

Choose the correct sentence. If the temperature at the subsequent airport is lesser than -20 deg.C, fill the related reservoir at the maximum level shown on the reservoir. If the temperature at the subsequent airport is less than -20 deg.C, fill the related reservoir at the maximum level shown on the reservoir. If the temperature at the subsequent airport is lesser than -20 deg.C, fills the related reservoir at the maximum level shown on the reservoir.

Choose the correct sentence. No authorization from the U.S. department of commerce is required for export, re-export, in-country transfer, or access unless to country group E:1 or E:2. None authorization from the U.S. department of commerce are required for export, re-export, in-country transfer, or access export to country group E:1 or E:2. No authorization from the U.S. department of commerce is required for export, re-export, in-country transfer, or access export to country group E:1 or E:2.

Choose the correct sentence. Make a check of the dynamic sealsof pistons, slide valves and swivel joints with the system pressurized, but do not operate the components. Do a check of the dynamic sealsof pistons, slide valves and swivel joints with the system pressurized, but do not operate the components. Make a check of the dynamic sealsof pistons, slide valves and swivel joints with the system pressurizing, but do not operate the components.

Choose the correct sentence. Therefore, it is critical to adjusment the housing upper attachment bushing so that the upper guide rollers correctly engage the upper guide fittings when the door is lowered. Therefore, it is critical to adjusment the housing upper attachment bushing in order that the upper guide rollers correctly engage the upper guide fittings when the door is lowered. Therefore, it is critical to adjusment the housing upper attachment bushing so that the upper guide rollers correctly engaging the upper guide fittings when the door is lowered.

"A leakage is a quantity of fluid on the surface of a component that is not sufficient to become a drop. Una mancha es una cantidad de fluido en la superficie de un componente que no es suficiente para convertirse en una gota. Una fuga es una cantidad de fluido en la superficie de un componente que no es suficiente para convertirse en una gota. Un goteo es una fuga de fluido en la superficie que no tiene componentes suficientes.

Do not operate the door when the winds are more than 40 knots. No opere la puerta cuando los vientos superen los 40 nudos. No abra la puerta cuando los vientos alcancen los 40 nudos. No opere la puerta con menos de 40 nudos de viento.

Use a non-metallic scraper to carefully remove all ofthe cold curing silicone compound. Use un raspador no metalico para remover cuidadosamente la silicona con un compuesto frio. Utilice un compuesto no metalico de silicon para raspar cuidadosamente el metal frio. Use un raspador no metalico para remover cuidadosamente todo el compuesto de silicona curado en frio.

Make sure that the travel ranges of the flight controls surface are clear. Asegurese de que los rangos de recorido de las superficies de los controles de vuelo esten despejados. Asegurese de que el recorrido de los controles de vuelo este limpio y claro. Asegurese de viajar con los controles de vuelo despejados.

According to the text, what defines a "stain". A quantity of fluid sufficient to become a drop. An area on the surface with different color, usually caused by dried fluid. A leak of exactly 20 drops per cc.

What should a technician do first if a leak is a found at a hydraulic tube connection?. Replace the defective componects immediately. Apply high temperature to dry the leak. Tighten the nut to the specified torque.

What is the leak limit for components in the alternate braje system ?. No more than 2 drops in 10 minutes. Exactly 20 drops per minute. 10 drops in2 minutes.

How many passenger entry doors are on the entire airplane ?. Four. Eight. Six.

During a door open test, what is the acceptable time range to push the door to the fully open position. 3 to 7 seconds. Under 3 seconds. 35 to 50 seconds.

How does the bulk cargo door (BCD) operate according to the text?. It opens outward and upward automatically. It operates automatically to the left side. It opens inward and is manually operated.

How does the failure manifestation of composite structures primarily differ from that of metallic airframes?. Composite damage typically involves internal layer separation that cannot be detected visually. Composites consistently exhibit deep, visible surface fissures immediately following blunt force trauma. Metallic fatigue mandates ultra sonic testing, whereas composites can usually be assessed visually.

What is the primary risk of employing thermal curing blankets without preceding moisture mitigation?. The curing blankets will inherently fail reach the requisite temperature for proper resin adherence. Trapped moisture may convert into steam, causing expansion that drastically worsens the internal structural separation. It will cause the carbon fibers to permanently lose their tensile strength due to chemical alterations.

What potential consequence does the author highlight regarding the misinterpretation of ultrasonic evaluation data by a technician?. The NDI testing equipment could undergo a catastrophic system failure durimg the scanning procedure. The structural repair manual (SRM) will require a mandatory, immediate revision by the engineering department. The technician might erroneosly conclude that the extent of the damage is far smaller than it actually is.

How does a jet engine create thrust to move an airplane?. It pulls air into the front and pushes it out the back. It mixes fuel and water to generate a strong forward force. It uses large wind mills to scoop up heated air from outside.

What happens to the air inside the compressor section of the engine?. It gets cooled down rapidly before entering the combustion chamber. It gets pushed around the engine core to drastically reduce noise. It gets squeezed into a tighter space by progressively smaller blades.

What occurs when the compressed air reaches the engine's combuster ?. It is pushed through a special gear to improve fuel economy. It is used to rapidly cool down the fast spinning turbine. It is mixed with jet fuel and meets a very hot flame.

How does the turbine interact with the rest of the jet engine?. It slows down the outside bypass air to heavily reduce loud noise. It mixes squeezed air with super gasoline to produce forward thust. It scoops up energy from the heated air to spin the front fan.

What is the main advantage of the gear inside the "pure power" engine ?. It makes the internal turbine spin much more slowly than the fan. It removes the combuster completely to cut back kn heavy pollution. It lets the fans push air much more slowly than the turbine.