TEST BORRADO, QUIZÁS LE INTERESE:
SAP C_IBP_2111 EXAM
COMENTARIOS |
ESTADÍSTICAS |
RÉCORDS
|
|---|
REALIZAR TEST
|
Título del Test:
SAP C_IBP_2111 EXAM Descripción: Certified Application Associate - SAP IBP for Supply Chain_1 Autor: Peter Alvarado OTROS TESTS DEL AUTOR Fecha de Creación: 12/03/2022 Categoría: Otros Número Preguntas: 40 |
COMPARTE EL TEST
COMENTAR
No hay ningún comentario sobre este test.
Temario:
|
You are configuring disaggregation for the KF1 key figure. Which methods can you apply?
Note: There are 3 correct Answers to this question. Disaggregation according to an equal split Disaggregation in batch triggered by an application job An internal system-generated disaggregation Proportional disaggregation by using KF2 in the expression Disaggregation according to a user-defined expression. You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process? Note: There are 2 correct Answers to this question. Splitting the values from detailed to aggregated level by using copy operator Splitting the values from aggregated to detailed level based on stored split-factor key figure Splitting the values from aggregated to detailed level based on time profile attribute Splitting the values from aggregated to detailed level using multiplication by the proportions. You created a key figure and want to add calculations. Which of the following rules do you consider? Note: There are 2 correct Answers to this question. All key figure calculations have calculation inputs, which can be marked as stored or calculated. The calculation chain for a key figure must always result in a calculated key figure. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation U level. Key figures can be calculated across different planning levels. How can you check if key figure is editable or non-editable? Using the Web-based Planning app when selecting key figures Using the Key Figure Calculations app Using the Edit View and then the Edit Planning View option Using the Analytics Advanced app when selecting key figures. Analytics charts are created by the user in the Advanced Analytics application. What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question. Group data. Merge charts together. Open graphics in Excel. Apply filters on your data. How many different time levels can be selected within one planning view? All time levels available in the time profile All time levels available in the time profile, restricted by global configuration parameter Only time levels from the base planning level of selected key figures Only base time levels of the planning area. Which conditions are prerequisites for key figure disaggregation? The key figure is calculated and editable. The key figure is calculated and aggregation mode is selected. The key figure is set to Not Editable. The key figure is stored and editable. Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question. It should be a non-key attribute of the master data type. The length of the attribute needs to be 18 digits. It belongs to a simple or compound master data type. Its data type is INTEGER and its length has been specified. What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question. Configure at most two input key figures on the same planning level in a key figure calculation. Assign the compound master data type and its component master data types. Specify a planning horizon in the planning area for each level of the assigned time profile. Configure at least one calculated key figure for the planning area. You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis. The result generates sensed demand data at the monthly time granularity for the full time horizon Set up the forecast model to be executed at product-location level. It is mandatory to load historical lag-based snapshot data. Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are 2 correct Answers to this question. Manual creation of feasible constrained plans Finite resource planning A basic demand planning process An advanced demand planning process. You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question. LOCATIONFR sourcelocation SOURCECUSTOMER SOURCEPRODUCTION. Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question. The number of steps in a process template is the same for all implementations. Each step depicted in the template can have tasks associated with it. All process templates are assigned to dashboards. New instances of templates allow for re-use of the same processes again. You are working with the inventory optimization process and you want to use a what-if analysis. What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question. Changed variability Service levels Capacity consumption Number of planning combinations. Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question. Violation of minimum aggregated inventory values Not adhering to maximum transport values Not-fully satisfied demands Not respecting production capacity Violation of minimum resource utilization. A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets? IF("PERIODID2" ="$$PERIODID2CU$$...) IF("PERIODID5" ="$$PERIODID5CU$$...) IF("PERIODID4" = "SSPERIODID4CU$$...) IF("PERIODID3" ="$$PERIODID3CUSS...). Model configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object? This object contains user-defined criteria that monitor execution of business plans. This object provides a single value for a unique planning combination. This type of key figure is not usually stored and it cannot be set to editable. This object is not exposed to the user in planning views or modeling. You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: There are 3 correct Answers to this question. The alerts dashboard is not available if a value-based filter is set for the open planning view. These filters are always applied based on the values stored in the database. You can only apply one value-based filter per planning view. These filters can be used together with attribute totals in the same planning view You can add (or delete) planning objects to a planning view after these filters are applied. You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question. Enter transportation lead times. Model adjusted transport receipts. Create product substitutions. Set minimum and maximum lot sizes. What type of key figure requires a planning level to have all attributes as roots? The conversion key figure, such as exchange rate The special key figure marked as an aggregate key figure The time independent key figure, such as FCSTMAPE The attribute transformation key figure, such as PERIODID1. NO.21 For which of the following application jobs can you enter planning filters as parameters? Note: There are 2 correct Answers to this question. Purge Non-Conforming Data Create Time Periods for Time Profiles Purge Key Figure Data Purge Master Data. You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP. What is mandatory to create in your planning area for the setup of reference product(s) to work? Note: There are 2 correct Answers to this question. Planning objects for the new product Definition of an attribute representing the product ID Definition of Actual Sales business meaning for one key figure Definition of an attribute representing the product description. NO.23 You are redesigning planning for supply chain that is facing the issue of variability. What is the best solution for dampening variability via demand classification? SAP IBP for Demand SAP IBP for Demand Driven Replenishment SAP IBP for Inventory SAP IBP for Sales and Operations Planning. How can you make charts and dashboards private? Choose only relevant key figures and filters in the Analytics Advanced application. Enable the relevant settings in the global configuration parameters. Set restrictions for charts in the Permission filter application. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications. You are creating advanced copy operators as part of an SAP IBP solution that is being implemented. What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question. Specifying target key figure is mandatory. Specifying target key figure that is time independent is possible. Specifying source key figure is mandatory. Selecting by attribute with option 'contain' is possible. Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question. All process templates are assigned to dashboards. The number of steps in a process template is the same for all implementations. Each step depicted in the template can have tasks associated with it. New instances of templates allow for re-use of the same processes again. Where can we see the results of Time Series analysis in SAP IBP? Time Series Property Attribute in Customer Source Time Series Property Attribute in Customer Product Time Series Property Attribute in Customer Time Series Property Attribute in Product. What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question. Assign more appropriate inventory algorithms to planning objects. Tailor your forecast strategy and inventory optimization to segment characteristics. Identify inventory items that require closer attention. Analyze forecast accuracy by product class. What function would you use to configure a year-to-date calculation? Rolling Aggregation Last Period Aggregation Cumulative Aggregation Dynamic Rolling Aggregation. Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question. Target inventory level Lead time variability Lot sizes Reorder point. Which SAP IBP planning operator can be run to delete planning objects in a certain version? Purge Key Figure Data Purge Key Figure Data Outside Planning Area Planning Horizon Purge Non-Confirming Data Purge Master Data. You need to create time periods for the time profile in a planning are a. What should you be aware of when executing the Create Time Periods application job? This application job cannot be scheduled for immediate start. A time profile has to be activated so that the application job can proceed. This application job can be run for multiple time profiles at once. The planning area with this time profile must be activated so that the application job can proceed. You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)? Incremental production values Capacity expansion with additional costs Production source validity at the start of seasonal peak Adjusted production interactive values. Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question. Planning unit UOM to ID Target currency Type of algorithm to use. You create an S&OP operator for heuristics on an SAP IBP project. What must you enable for the S&OP operator that is specifically relevant for subnetworks? Compute Expected Supply parameter Balance Receipts parameter Normalize Quotas parameter Supply propagation. You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question. The name of the realignment step should be no longer than 20 characters. If a realignment step fails, subsequent steps are not processed. The number of steps in realignment run is limited to 255. The realignment step status must be set to In Review for it to be executed. Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question. Target key figures for these snapshots are exposed to the user in planning views. Lag-based snapshots are created in the Configuration app for a fixed time range. Target key figures for these snapshots must have lag as a root attribute. Lag-based snapshots are automatically assigned to a snapshot operator. SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process? Note: There are 2 correct Answers to this question. You can choose to import only some of the items that were exported. You can move a transported item from one collection to another. You can create a collection of items and export it. You can export from a planning area that is on a different release. Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct Answers to this question. Only attribute-based totals can be added to the planning view. The total value can be added before or after the selected attribute. The values of the attribute-based total at the highest attribute level in the planning level can be changed. The total number of attributes that can use subtotals in the planning view can be restricted. You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed? Note: There are 2 correct Answers to this question. Planning results can be generated faster by the optimizer. Prioritization of demand elements one by one is achieved by heuristics. Prioritization of demand elements one by one is achieved by heuristics. Finite heuristics can achieve demand prioritization and pegging. |
Denunciar Test