TEST BORRADO, QUIZÁS LE INTERESE:
SAP IBP for Supply Chain 2
COMENTARIOS |
ESTADÍSTICAS |
RÉCORDS
|
|---|
REALIZAR TEST
|
Título del Test:
SAP IBP for Supply Chain 2 Descripción: SAP IBP for Supply Chain 2 Autor: Peter Alvarado OTROS TESTS DEL AUTOR Fecha de Creación: 22/11/2023 Categoría: Otros Número Preguntas: 50 |
COMPARTE EL TEST
COMENTAR
No hay ningún comentario sobre este test.
Temario:
|
What is an example of a commonly used time-independent Key figure?
Please choose the correct answer. A currency conversation key figure such as Exchange rate A special key figure marked as an aggregate key figure (aggregate constraint) any attribute as a key figure A unit of measure key figure such as UOM conversion Factor. Which of the following are examples of time-independent key figures? There are 2 correct answers to this question A special key figure marked as an aggregate key figure (aggregate constraint) A currency conversion key figure, such as exchange rate A unit of measure key figure, such as UOMCONVERSIONFACTOR A forecast metric key figure, such FCSTMAPE. Model Configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object? Please choose the correct answer. This object provides a single value for a unique planning combination This type of key figure is not usually stored and it cannot be set to be editable This object contains user-defined criteria that monitor execution of business plans This object is not exposed to the user in planning views or modeling. Which type of Master Data will be represented by the Master Data Type LOCATIONFR? Please choose the correct answer. Virtual Master Data Type Reference Master Data Type Compound Master Data Type External Master Data Type. You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? There are 2 correct answers to this question. The name of the realignment step should be no longer than 20 characters. The number of steps in realignment run is limited to 255. The realignment step status must be set to Approved for it to be executed. If a realignment step fails, subsequent steps are not processed. Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)? There are 3 correct answers to this question. Transportation lead times Maximum lot size Minimum lot size Adjusted transport receipts Aggregated constraints. Which SAP IBP planning operator can be run to delete planning objects in a certain version? Please choose the correct answer. Purge Non-Confirming Data Purge Key Figure Data Outside Planning Area Planning Horizon Purge Key Figure Data Purge Master Data. As an architect you are configuring the planner workspaces user interface settings. Which appearance settings are on your to do list? There are 3 correct answers to this question. Add navigation profiles Add playbooks for alerts Define key figure formatting Add planning views Add custom alerts. What are the main benefits of using SAP IBP Control Tower? There are 3 correct answers to this question. Gain holistic visibility across internal and external supply chain planning and execution systems and networks To create suitable application job chains Understand the impacts and cause of exceptions, and take action to solve the problem Control which orders are going to be processed first by assigning rank via priority Collaborate, communicate and monitor performance of the supply chain. Which conditions are prerequisites for key figure disaggregation? Please choose the correct answer. The key figure is set to Not Editable. The key figure is stored and editable in the current and future. The calculated key figure is available and aggregation mode is selected. The key figure is calculated and editable in the current and future. What is a prerequisite for modelling outsourced manufacturers with production capacity? Please choose the correct answer. Model target inventory and stocks at the outsourced location. Use production lead times and offsets to manage components at the outsourced location. Model production cost for internal and external production resources to model priority. Ensure set up of multiple modes of transportation. Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? There are 2 correct answers to this question. The length of the attribute needs to be 18 digits. Its data type is INTEGER and its length has been specified. It should be a non-key attribute of the master data type. It belongs to a simple or compound master data type. Which pre-processing steps can be used to cleanse historical sales data before generating a statistical forecast in SAP IBP? There are 2 correct answers to this question. Substitute Missing with Mean or Median in Sales History Intermittency Detection and Correction in Sales History Promotion Sales Lift Elimination Bias Detection and Correction in Sales History. Which of the following fields can be overwritten in the New Planning view by fixed default value settings? There are 3 correct answers to this question. Unit of Measure to ID Currency to ID Language Default Display Time Planning Unit. Which of the following key functions are supported by IBP for Sales and Operations planning? There are 2 correct answers to this question. Supports manual creation of feasible constrained plans Supports a basic demand planning process Supports an advanced demand planning process Supports a finite resource planning. What are the outputs of the Calculate Target Inventory Components Operator? There are 3 correct answers to this question. Target Cycle Stock Recommended Safety Stock Component Usage Reorder Point Target Pipeline Stock. You created a time profile and want to use time levels. In which of the following cases is it mandatory to set the time level? There are 2 correct answers to this question. Maintain a time profile level as parameter in a disaggregation planning operator. Choose a time profile level in a planning view in Microsoft Excel. Assign a time profile level for a planning level of a planning area. Assign a time profile level during the load of key figure values with the Data Integration Jobs app. What are the ways to achieve rolling aggregation with SAP IBP? Please choose the correct answer. Using local member Using attribute as a key figure Using key figure calculation Using aggregation mode average. You need to create various planning operators. Which operators must you assign to your planning area to view them in Microsoft Excel? There are 2 correct answers to this question. Disaggregation Operator Statistical Forecasting Copy Operator Check Mode Operator. You want to enable versions for your planning area. Which activities must you perform? There are 2 correct answers to this question. Create a version using the Microsoft Excel Add-In. Create a version using the Web UI. Assign key figures to the version. Assign master data to the version. You need to define a new logic for key figure to split values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process? There are 2 correct answers to this question Spitting the values from aggregated to detailed level based on time profile attribute Spitting the values from detailed to aggregated level by using copy operator Splitting the values from aggregated to detailed level based on stored split factor key figure Splitting the values from aggregated to detailed level using multiplication by the proportions. Which of the following configuration rules can be applied to the copy operator? There are 2 correct answers to this question. Copy operator can consider both the configured filter and user-specified filter. Duration is always optional parameter. Copy operator can create missing periods for the target key figure. Source and target planning areas are mandatory parameters. The S&OP Operator Profiles app is used to configure different types of algorithms. Which algorithm specific settings are unique for only the Time Series-based Supply Optimizer? There are 2 correct answers to this question. Time profile level Discretization Processing mode Global cost factors. Which of the following is one of the functions of Multi-Echelon inventory optimization? Please choose the correct answer. Ability to optimize delivery costs between different locations Ability to maintain high external service levels with low internal service levels Ability to maintain high external service levels with high internal service levels Ability to optimize lead times between different locations. Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods? Please choose the correct answer. Periods are identified by a start and end date and profiles by an integer. Periods are identified by an alphanumeric prefix and profiles by an integer. Both periods and profiles are identified by an integer. Periods are identified by an integer and profiles by an alphanumeric prefix. You are reviewing the master data types for supply planning. Which master data types are compound master data types? There are 2 correct answers to this question. SOURCECUSTOMER SOURCEPRODUCTION SOURCELOCATION LOCATIONFR. Which Master Data Types are used in time-series-based planning within SAP IBP for response and supply? There are 3 correct answers to this question. Location Product DS Order Fullfillment Transportation Lane Customer. You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP. What are the integration tools that you can use with such a setup for data transfer? There are 2 correct answers to this question. Cloud Identity Authentication Service Real-time Integration Cloud Integration for Data Services Smart Data Integration. What do you need to be aware of when using multiple pairs of key figures in one copy operator? There are 2 correct answers to this question. Copying multiple key figures can be processed sequentially. If necessary source key figures values are disaggregated. Copying multiple key figures on different planning levels is not possible. If necessary target key figures values are disaggregated. Which prerequisites must be met to maintain data types via the sap IBP, add-in for Microsoft excel? There are 2 correct answers to this question. The normalized setting is available in the planning area An applicable business catalog is assigned to your business role Restriction types are set correctly The inquire tab is activated in Microsoft excel. What are the relevant use cases for helper key figures? There are 2 correct answers to this questions. Used at any level of calculation level except the Request Level Used when you have more than three inputs at different planning levels in one calculation Used by end-users in planning views to help visualize cross-period calculations Used to break down a large calculation into manageable subcalculations. Which of the following are the key features of SAP Supply Chain Control Tower? There are 2 correct answers to this question. Ability to use task and case management Ability to create a feasible plan Ability to balance demand and supply and attain financial targets Ability to create smart alerts. Why would you run the Purge Non-Conforming Planning Area Data application job? Please choose the correct answer. To purge Master Data from a certain Planning Area after activation To purge key figure data basing on certain attributes To purge key figure data outside of certain time frame To delete non-conforming Location Products after Purge Master Data was performed. Which one of the following values can you use in disaggregation expressions? Please choose the correct answer. KF1 (Stored) + KF2 (Stored) + Attribute KF1 (Stored) + Helper KF KF1 (Calculated) + Attribute If (Attribute!=O, KF1 (Stored), KF2 (Calculated)). How is minimum resource utilization considered by the optimizer? There are 2 correct answers to this question. For all buckets and all quantities that represent the minimum utilization. Minimum resource utilization may not be achieved in full for restricted storage capacity. Achieved in short term and then tail off in future buckets, due to discounts. It depends on demands in future buckets; if there is no demand, no utilization. What do you have to do to connect to the SAP IBP database with SAP IBP Add-In for Microsoft Excel? There are 2 correct answers to this question. Activate the time profile Install the EPM Add-In for Microsoft Excel Install the SAP IBP add-in for Microsoft Excel. Check that you have access to the Planning area. What are the main features of alert key figures? Please choose the correct answer. Data for these key figures can be loaded into the system They can be defined as a key figure in the same way as the unit price They check the conditions of other key figures They can be set to both calculated and stored. Why would you set up a cascading filter in the planning view? There are 2 correct answers to this question. To filter attributes based on specific values To filter attributes based on other attribute filters To filter using attributes that have a large number of values To filter data in for an Application Job template. Which of the following solutions should be satisfied with violations penalized by the objective function of the time-series supply optimizer? Not adhering to maximum transport values There are 3 correct answers to this question. Not-fully satisfied demands Violation of minimum resource utilization Violation of minimum aggregated inventory values Not respecting production capacity. Using the import/export functionality means working with groups of items that are organized into collections. What is the best practice for managing collections? Please choose the correct answer. Configuration items should be bundled in the collections based on the SAP IBP project stream. A planning area with its time profile must be bundled in one collection. A planning area with the copy operators assigned must be bundled in one collection You should delete collections after they have been transported. Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? There are 3 correct answers to this question. Rough-cut supply planning Consensus demand planning Finite resource capacities planning Executive review Demand Driven Materials Requirement planning. You are developing the functionality and appearance of the Excel UI for SAP IBP business users. Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding? There are 2 correct answers to this question. Changing the member names Changing the layout of the master data workbooks Changing the entries from the Name Manager SAP IBP ribbon extension. You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to? There are 2 correct answers to this question. Supply chain graph in Supply Chain Network app Jobs in the Applications Jobs app Planning view templates in the SAP IBP add-in for Microsoft Excel Snapshot operator in the SAP IBP add-in for Microsoft Excel. Which of the following are functions of the Snapshot Key Figures feature? There are 3 correct answers to this question. The most recent snapshot is numbered with the highest number A snapshot is taken only if a snapshot operator is run Not exposed to the user in planning views A snapshot takes a copy of a key figure at a particular point in time You can create up to nine time snapshots at periodic intervals, producing a time- lapsed view of your data. The planner workspaces are an important user interface of SAP IBP for supply chain. What are the value drivers to use this as a planner? There are 3 correct answers to this question. Application jobs can be started from this user interface Issues can be identified and solved with special functions It combines data from multiple planning areas into one user interface It can trigger SAP S/4HANA transactions in real time It combines various components into one user interface. Which sets of chart types are provided within the Analytics Advanced application? There are 3 correct answers to this question. Comparison Chart Types Seasonal Chart Types Trend Chart Types Geographic Chart Types Simulation Chart Types. Which action that can be performed with an existing configuration object will result in the creation of a D record in the database? Please choose the correct answer. Modifying the active record Modifying the inactive record Performing the active deletion Generating any new object. Which of the following are functions of SAP IBP for Demand? There are 3 correct answers to this question. Demand Sensing of demand data using predictive analytics tools Detailed statistical analysis of demand data using the supply chain algorithm library Embedded, on the fly, demand analytics Demand Sensing of demand data using the supply chain algorithm library Detailed statistical analysis of demand data using predictive analytics tools. You need to monitor the capacity of your Distribution Center goods receipt employees. Every goods receipt takes two working days of a warehouse employee. How would you model this? Please choose the correct answer. Maintain a storage resource on the DC and maintain the number of days on the location product attribute. Maintain a regular production resource and change the description in goods receipt employee capacity. Maintain the number of days on the location product attribute. Maintain a warehouse-resource on the DC and maintain the number of days on the location product Maintain a handling resource with available capacity on the DC and maintain the number of days on the location product attributes. What option is available for the key figure that is enabled for fixing? Please choose the correct answer. Fixing is possible for key figures with negative values Fixing is possible for a certain period, including all child values in the hierarchy You can change fixed key figure only with administrative rights Fixing is possible for a part key figure value on a certain planning level. |
Denunciar Test