Simulado para Exame NSE 4_ALEATÓRIO

Refer to the exhibit. Review the intrusion prevention system (IPS) profile signature settings shown in the exhibit. What do you conclude when adding the FTP.Login.Failed signature to the IPS sensor profile?. Traffic matching the signature will be allowed and logged. Traffic matching the signature will be silently dropped and logged. The signature setting uses a custom rating threshold. The signature setting includes a group of other signatures.

Which two settings are required for SSL VPN to function between two FortiGate devices? (Choose two.). The client FortiGate requires a manually added route to remote subnets. The client FortiGate requires the SSL VPN tunnel interface type to connect SSL VPN. The server FortiGate requires a CA cartificate to verify the client FortiGate certificate. The client FortiGate requires a client certificate signed by the CA on the server FortiGate.

An administrator has configured a strict RPF check on FortiGate. How does strict RPF check work?. Strict RPF check is run on the first sent and reply packet of any new session. Strict RPF checks only for the existence of al least one active route back to the source using the incoming interface. Strict RPF allows packets back to sources with all active routes. Strict RPF checks the best route back to the source using the incoming interface.

An administrator configures outgoing interface any in a firewall policy. What is the result of the policy list view?. SSL and authentication policy is disabled. By Sequence view is disabled. Interface Pair view is disabled. Search option is disabled.

FortiGuard categories can be overridden and defined in different categories. To create a web rating override for the example.com home page, the override must be configured using a specific syntax. Which two syntaxes are correct ta configure a web rating override for the home page? (Choose two.). example.com. www.example.com. www.example.com:443. www.example.com/index.html.

Refer to the exhibits. The exhibits show the SSL and authentication policy (Exhibits A) and the security policy (Exhibit B) for Facebook. Users are given access to the Facebook web application. They can play video content hosted on Facebook, but they are unable to leave reactions on videos or other types of posts. Which part of the policy configuration must you change to resolve the issue?. Get the additional application signatures. required to acd to the security policy. Force access to Facebook using the HTTP service. The SSL inspection a deep content inspection. Add Facebook in the URL category in the security policy.

FortiGate is operating in NAT mode and is confiqured with two virtual LAN (VLAN) subinterfaces added to the same physical interface. In this scenario, what are two requirements for the VLAN ID? (Choose two.). The two VLAN subinterfaces can have the same VLAN ID, only if they belong to different VDOMs. The two VLAN subinterfaces must have different VLAN IDs. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in different subnets. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in the same subnet.

Which two attributes are required on a certificate so it can be used as a CA certificate on SSL inspection? (Choose two.). The keyUsage extension must be set to keyCertSign. The issuer must be a public CA. The CA extension must be set to TRUE. The common name on the subject field must use a wildcard name.

Refer to the exhibit. The exhibit shows a diagram of a FortiGate device connected to the network, the firewall policy and VIP configuration on the FortiGate device, and the routing table on the ISP router. When the administrator tries to access the web server public address (203.0.113.2) from the internet, the connection times out. At the same time, the administrator runs a sniffer on FortiGate to capture incoming web traffic to the server and does not see any output. Based on the information shown in the exhibit, what configuration change must the administrator make to fix the connectivity issue?. In the VIP configuration, enable arp-reply. Enable port forwarding on the server lo map the external service port to the internal service port. In the firewall policy configuration, enable match-vip. Configure a loopback interface with address 203.0.114.2/32.

Refer to the exhibits. The exhibits show a firewall policy (Exhibit A) and an antivirus profile (Exhibit B). Why is the user unable to receive a block replacement message when downloading an infected file for the first time?. The volume of traffic being inspected is too high for this model of FortiGate. The intrusion prevention security profile must be enabled when using flow-based inspection mode. Flow-based inspection is used, which resets the last packet to the user. The firewall policy performs a full content inspection on the file.

An administrator has configured the following settings: config system settings set ses-denied-traffic enable end config system global set block-session-timer 30 end What are the two results of this configuration? (Choose two.). The number of logs generated by denied traffic is reduced. Denied users are blocked for 30 minutes. Device detection on all interfaces is enforced for 30 minutes. A session for denied traffic is created.

Refer to the exhibit. Based on the ZTNA tag, the security posture of the remote endpoint has changed. What will happen to endpoint active ZTNA sessions?. They will be re-evaluated to match the endpaint policy. They will be re-evaluated to match the firewall policy. They will be re-evaluated to match the ZTNA policy. They will be re-evaluated to match the security policy.

Refer to the exhibits. Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the default configuration of high memory usage thresholds. Based on the system performance output, which two results are correct? (Choose two.). Administrators can access FortiGate only through the console port. FortiGate has entered conserve mode. Administrators cannot change the configuration. FortiGate will start sending all files to FortiSandbox for inspection.

Which statement describes a characteristic of automation stitches?. They can be run only on devices in the Security Fabric. They can have one or more triggers. They can be created on any device in the fabric. They can run multiple actions simultaneously.

What are two benefits of flow-based inspection compared to proxy-based inspection? (Choose two.). FortiGate uses fewer resources. FortiGate adds less latency to traffic. FortiGate allocates two sessions per connection,. FortiGate performs a more exhaustive inspection on traffic.

Refer to the exhibit. The exhibit shows a diagram of a FortiGate device connected to the network and the firewall policy and IP pool configuration on the FortiGate device. Which Two actions does FortiGate take on internet traffic sourced from the subscribers? (Choose two.). FortiGate allocates port blocks on a first-come, first-served basis. FortiGate allocates 128 port blocks per user. FortiGate allocates port blocks per user, based on the configured range of internal IP addresses. FortiGate generates a system event log for every port block allocation made per user.

Refer to the exhibit. The exhibit shows the output of a diagnose command. What does the output reveal about the policy route?. It is an ISDB route in policy route. It is an SDWAW rule in policy route. it is an ISDB policy route with an SDWAN rule,. It is a regular policy route.

An administrator wants to configure timeouts for users. Regardless of the user's behavior, the timer should start as soon as the user authenticates and expire after the configured value. Which timeout option should the administrator configure on FortiGate?. hard-timeout. new-session. saft-timeout. auth-an-demand. Idle-timeout.

Which engine handles application control traffic on the next-generation firewall (NGFW) FortiGate?. Intrusion prevention system engine. NTurbo engine. Application central engine. Antivirus engine.

Which timeout setting can be responsible for deleting SSL VPN associated sessions?. SSL VPN login-timeout. SSL VPN http-request-bedy-timeout. SSLVPN dtls-hello-timeout. SSL VPN idle-timeout.

Which three statements explain a flow-based antivirus profile? (Choose three.). FortiGate buffers the whole file but transmits to the client at the same time. Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection. The IPS engine handles the process as a standalone. Optimizes performance compared to proxy-based inspection. if a virus is detected, the last packet is delivered to the client.

Refer to the exhibits. Exhibit A shows a network diagram. Exhibit B shows the firewall policy configuration and a VIP object configuration. The WAN (port1) interface has the IP address 10.200.1.1/24, The LAN (port3) interface has the IP address 10.0.1.254/24. If the host 10.200.3.1 sends a TCP SYN packet on port 10443 to 10.200.1.10 what will the source address, destination address, and destination port of the packet be, after FortiGate forwards the packet to the destination?. 10.200.3.4, 10.0.1.10, and 443, respectively. 10.0.1.254, 10.200.1.10 and 443, respectively. 10.0.1.254, 10.0.1.10, and 443, respectively. 10.0.1.254, 10.0.1.10, and 10443, respectively.

On FortiGate, which type of logs record information about traffic directly to and from the FortiGate management IP addresses?. Security logs. System event logs. Forward traffic logs. Local traffic logs.

By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers. Which CLI command causes FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?. set webfilter-force-anycast disable. set fortiguard-anycast disable. set protocol tcp. set webfilter-cache disable.

Refer to the exhibit. An administrator is running a sniffer command as shown in the exhibit. Which three pieces of information are included in the sniffer output? (Choose three.). IP header. Ethernet header. Application header. Packet payload. Interface name.

A network administrator is configuring a new IPsec VPN tunnel on ForliGate. The remote peer IP address is dynamic. In addiction, the remote peer does not support a dynamic DNS update service. Which type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?. Pre-shared key. Static IP address. Dialup user. Dynamic DNS.

What are two features of FortiGate FSSO agentless polling mode? (Choose two.). FortiGate uses the AD server as the collector agent. FortiGate uses the SMB protocol to read the event viewer logs from the DCs. FortiGate directs the collactor agent to use a remote LDAP server. FortiGate does not support workstation check.

Refer to the exhibit. The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local VDOMs are configured in transparent mode. The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users to access the internet. The To_Internet VDOM is the only VDOM with internet access and is directly connected to the ISP modem. What can you conclude about this configuration?. Inter-VDOM links are nat required between the Root and To_Internet VDOMs because the Root VDOM is used only as a management VDOM. Inter-VDOM links are required to allow traffic between the Local and DMZ VDOMs. A default static route is not required on the To_Internet VDOM to allow LAN users to access the internet. Inter-VDOM links are required to allow traffic between the Local and Root VDOMs.

Refer to the exhibits. The exhibits contain a network diagram, and virtual IP, IP pool, and firewall policies configuration information. The WAN (port1) interface has the IP address 10.200.1.1/24 The LAN (port3) interface has the IP address 10.0.1.254/24 The first firewall policy has NAT enabled using IP pool The second firewall policy is configured with a VIP as the destination address Which IP address will be used to source NAT (SNAT) the internet traffic coming from a workstation with the IP address 10.0.1.10. 10.200.1.100. 10.0.1.254. 10.200.1.1. 10.200.1.10.

Refer to the exhibits. The exhibits show a network diagram and firewall configurations. An administrator created a Deny policy with default settings to deny Webserver access for Remote-User. Remote-User1 must be able to access the Webserver. Remote-User2 must not be able to access the Webserver. In this scenario, which two changes can the administrator make to deny Webserver access for Remote- User2? (Choose two.). Set the Destination address as Deny_IP in the Allow_access po. Set the Destination address as Webserver in the Deny policy. Enable match-vip in the Deny policy. Disable match-vip in the Deny policy.

What are two functions of ZTNA? (Choose two.). ZTNA provides a security posture check. ZTNA manages access through the client only. ZTNA provides role-based access. ZTNA manages access for remote users only.

Refer to the exhibit. Based on the routing database shown in the exhibit, which two conclusions can you make about the routes? (Choose two.). The port1 and port2 default routes active in the routing table. There will be eight routes active in the routing table. The port3 default route has the lowest metric. The port3 default route has the highest distance.

Which two protocols are used to enable administrator access of a FortiGate device? (Choose two.). FortiTelemetry. HTTPS. FTM. SSH.

Which three criteria can FortiGate use to look for a matching firewall policy to process traffic? (Choose three.). Highest to lowest priority defined in the firewall policy. Destination defined as Internet Services in the firewall policy. Lowest to highest policy ID number. Services defined in the firewall policy. Source defined as Internet Services in the firewall policy.

Refer to the exhibit. A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up. Based on the phase 2 configuration shown in the exhibit, which configuration change will bring phase 2 up?. On HQ-FortiGale, set Encryption to AES256. On HQ-ForliGate, enable Diffie-Hellman Group 2. On HQ-FortiGale, enable Auto-negotiate. On Remote-FortiGate, set Seconds to 43200.

Which statement is correct regarding the use of application control for inspecting web applications?. Application control can identify child and parent applications, and perform different actions on them. Application control does not require SSL inspection to identify web applications. Application control signatures are organized in a nonhierarchical structure. Application control does not display a replacement message for a blocked web application.

An administrator wants To configure dead peer detection (DPD) on IPsec VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when no traffic is observed in the tunnel. Which DPD mode on FortiGate will meet this requirement?. Disabled. On Idle. On Demand. Enabled.

A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes. All traffic must be routed through the primary tunnel when both tunnels are up. The secondary tunnel must be used only if the primary tunnel goes down. In addition, FortiGate should be able to detect a dead tunnel to speed up tunnel failover. Which two key configuration changes must the administrator make on FortiGate to meet the requirements? (Choose two.). Configure a higher distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static route for the secondary tunnel. Enable Dead Peer Detection. Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels.

Which statement about video filtering on FortiGate is true?. It does not require a separate FortiGuard license. Full SSL inspection is not required. Video filtering FortiGuard categories are based on web filter FortiGuard categories. It is available only on a proxy-based firewall policy.

Refer to the exhibit, which contains a RADIUS server configuration. An administrator added a configuration for a new RADIUS server. While configuring, the administrator selected the Include in every user group option. What is the impact of using the Include in every user group option in a RADIUS configuration?. This option places the RADIUS server, and all users who can authenticate against that server, into every FortiGate user group. This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate. This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group. This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator.

Which two statements explain antivirus scanning modes? (Choose two.). In flow-based inspection mode, FortiGate butters the file, but also simultaneously transmits it to the client. In proxy-based inspection mode, files bigger than the buffer size are scanned. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it to the client. In flow-based inspection mode, files bigger than the buffer size are scanned.

Refer to the exhibit showing a debug flow output. What two conclusions can you make from the debug flow output? (Choose two.). The default route is required to receive a reply. The debug flow is for ICMP traffic. A new traffic session was created. A firewall policy allowed the connection.

Refer to exhibit. An administrator configured the web filtering profile shown in the exhibit to block access to all social networking sites except Twitter. However, when users try to access twitter.com, they are redirected to a FortiGuard web filtering block page. Based on the exhibit, which configuration change can the administrator make to allow Twitter while blocking all other social networking sites?. On the Static URL Filter configuration, set Action to Monitor. On the Static URL Filter configuration, set Action to Exempt. On the Static URL Filter configuration, sat Type to Simple. On the FortiGuard Category Based Filter configuration, set Action to Warning for Social Networking.

Which statement correctly describes the use of reliable logging on FortiGate?. Reliable logging is required to encrypt the transmission of logs. Reliable logging can be configured only using the CLI. Reliable logging is enabled by default in all configuration scenarios. Reliable logging prevents the loss of logs when the local disk is full.

Refer to the exhibits. An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW). What must the administrator do to synchronize the address object?. Change the csf setting on Local-ForiGate (root) to set fabric-object-unification. Change the csf setting on both devices to get downstream-access enable. Change the csf setting ISFW (downstream) to set authorization-request-type. Change the csf setting on ISFW (downstream) to set configuration-sync local.

Refer to the exhibit. Examine the intrusion prevention system (IPS) diagnostic command shown in the exhibit. If option 5 is used with the IPS diagnostic command and the outcome is a decrease in the CPU usage, what is the correct conclusion?. The IPS engine is unable to prevention intrusion attack. The IPS engine is blocking all traffic. The IPS engine is inspecting a high volume of traffic. The IPS engine will continue to run in a normal state.

Refer to the exhibits. The SSL VPN connection fails when a user attempts to connect to it. What should the user do to successfully connect to the SSL VPN?. Change the SSL VPN portal to the tunnel. Change the server IP address. Change the SSL VPN port on the client. Change the idle-timeout.

Which two types of traffic are managed only by the management VDOM? (Choose two.). FortiGuard web filter queries. Tratfic shaping. PKI. DNS.

What is the limitation of using a URL list and application control on the same firewall policy. in NGFW policy-based mode?. It limits the scanning of application traffic to use parent signatures only. It limits the scanning of application traffic to the DNS protocol only. It limits the scanning of application traffic to the browser-based technology category only. It limits the scanning of application traffic to the application category only.

An administrator does not want to report the login events of service accounts to FortiGate. Which setting on the collector agent is required to achieve this?. Add user accounts to the Ignore User List. Add the support of NTLM authentication. Add user accounts to Active Directory (AD). Add user accounts to the FortiGate group filter.

Which two statements are true about the FGCP protocol? (Choose two.). Iis used to discover FortiGate devices in different HA groups. Elects the primary FortiGate device. Runs only over the heartbeat links. Is not used when FortiGate is in transparent mode.

A network administrator enabled antivirus and selected an SSL inspection profile on a firewall policy. When downloading an EICAR test file through HTTP, FortiGate detects the virus and blocks the file. When downloading the same file through HTTPS, FortiGate does not detect the virus and does not block the file, allowing it to be downloaded. The administrator confirms that the traffic matches the configured firewall policy. What are two reasons for the failed virus detection by FortiGate? (Choose two.). The website is exempted from SSL inspection. The selected SSL inspection profile has certificate inspection enabled. The EICAR test file exceeds the protocol options oversize limit. The browser does not trust the FortiGate self-signed CA certificate.

Which statement correctly describes NetAPI polling mode for the FSSO collector agent?. The NetSessionEnum function is used to track user logouts. The collector agent must search Windows application event logs. NetAPI polling can increase bandwidth usage in large networks. The collector agent uses a Windows API to query DCs for user logins.

Which two statements about the Security Fabric rating are true? (Choose two.). Many of the security issues can be fixed immediately by clicking Apply where available. The Security Fabric rating must be run on the root FortiGate device in the Security Fabric. The Security Fabric rating is a free service that comes bundled with all FortiGate devices. It provides executive summaries of the four largest areas of security focus.

Refer to the exhibit. The exhibit shows the IPS sensor configuration. If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.). The sensor will allow attackers matching the Microsoft.Windows.iSCSI.Target.DoS signature. The sensor will reset all connections that match these signatures. The sensor will gather a packet log for all matched traffic. The sensor will block all attacks aimed al Windows servers.

An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector 192.168.2.0/24 Which subnet must the administrator configure for the local quick mode selector for site B?. 192.168.2.0/24. 192.168.3.0/24. 192.168.1.0/24. 192.168.0.0/8.

Which two configuration settings are synchronized when FortiGate devices are in an active-active HA cluster? (Choose two.). NTP. FortiGate hostname. FortiGuard web filter cache. DNS.

When configuring a firewall virtual wire pair policy, which following statement is true?. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same. Only a single virtual wire pair can be included in each policy. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings. Exactly two virtual wire pairs need to be included in each policy.

Which statement is correct regarding the inspection of some of the services available by web applications embedded in third-party websites?. The security actions applied on the web applications will also be explicitly applied on the third-party websites. The application signature database inspects traffic only from the original web application server. FortiGuard maintains only one signature of each web application that is unique. FortiGate can inspect sub-application traffic regardless where it was originated.

Which two inspection modes can you use to configure a firewall policy on a profile-based next-generation firewall (NGFW)? (Choose two.). Proxy-based inspection. Certificate inspection. Flow-based inspection. Full Content inspection.

Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address. get system status. get system performance status. diagnose sys top. get system arp.

Which two statements are correct about SLA targets? (Choose two.). You can configure only two SLA targets per one Performance SLA. SLA targets are optional. SLA targets are required for SD-WAN rules with a Best Quality strategy. SLA targets are used only when referenced by an SD-WAN rule.

How does FortiGate act when using SSL VPN in web mode?. FortiGate acts as an FDS server. FortiGate acts as an HTTP reverse proxy. FortiGate acts as DNS server. FortiGate acts as router.

Which two statements are correct about NGFW Policy-based mode? (Choose two.). NGFW policy-based mode does not require the use of central source NAT policy. NGFW policy-based mode can only be applied globally and not on individual VDOMs. NGFW policy-based mode supports creating applications and web filtering categories directly in a firewall policy. NGFW policy-based mode policies support only flow inspection.

Why does FortiGate Keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?. To allow for out-of-order packets that could arrive after the FIN/ACK packets. To finish any inspection operations. To remove the NAT operation. To generate logs.

Given the interfaces shown in the exhibit, which two statements are true? (Choose two.). Traffic between port2 and port2-vlan1 is allowed by default. port1-vlan 10 and port2-vlan 10 are part of the same broadcast domain. port1 is a native VLAN. port1-vlan and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.

Which statement is true about the session diagnostic output?. The session is in SYN SENT state. The session is in FIN_ACK state. The session is in FTN WAIT state. The session is in ESTABLISHED state.

Which contains a session list output. Based on the information shown in the exhibit, which statement is true?. Destination NAT is disabled in the firewall policys and dumps. One-to-one NAT IP pool is used in the firewall policy. Overload NAT IP pool is used in the firewall policy. Port block allocation IP pool is used in the firewall policy.

Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.). There are five devices that are part of the security fabric. Device detection is disabled on all FortiGate devices. This security fabric topology is a logical topology view. There are 19 security recommendations for the security fabric.

The exhibit contains the configuration for an SD-WAN Performance SLA, as well as the output of diagnose sys virtual-wan-link health-check. port2. port4. port3. port1.

Which three options are the remote log storage options you can configure on FortiGate? (Choose three.). FortiCache. FortiSIEM. FortiAnalyzer. FortiSandbox. FortiCloud.

Which statement about the policy ID number of a firewall policy is true?. It is required to modify a firewall policy using the CLI. It represents the number of objects used in the firewall policy. It changes when firewall policies are reordered. It defines the order in which rules are processed.

An administrator has configured a performance SLA on FortiGate, which failed to generate any traffic. Why is FortiGate not sending probes to 4.2.2.2 and 4.2.2.1 servers? (Choose two.). The Detection Mode setting is not set to Passive. Administrator didn't configure a gateway for the SD-WAN members, or configured gateway is not valid. The configured participants are not SD-WAN members. The Enable probe packets setting is not enabled.

The exhibit displays the output of the CLI command: diagnose sys ha dump-by vcluster. Which two statements are true? (Choose two.). FortiGate SN FGVM010000065036 HA uptime has been reset. FortiGate devices are not in sync because one device is down. FortiGate SN FGVM010000064692 is the primary because of higher HA uptime. FortiGate SN FGVM010000064692 has the higher HA priority.

Based on the raw logs shown in the exhibit, which statement is correct?. Social networking web filter category is configured with the action set to authenticate. The action on firewall policy ID 1 is set to warning. Access to the social networking web filter category was explicitly blocked to all users. The name of the firewall policy is all_users_web.

Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.). System time. FortiGuard update servers. Operating mode. NGFW mode.

The global settings on a FortiGate device must be changed to align with company security policies. What does the Administrator account need to access the FortiGate global settings?. Change password. Enable restrict access to trusted hosts. Change Administrator profile. Enable two-factor authentication.

In which two ways can RPF checking be disabled? (Choose two ). Enable anti-replay in firewall policy. Disable the RPF check at the FortiGate interface level for the source check. Enable asymmetric routing. Disable strict-arc-check under system settings.

Refer to the exhibit to view the application control profile. Users who use Apple FaceTime video conferences are unable to set up meetings. In this scenario, which statement is true?. Apple FaceTime belongs to the custom monitored filter. The category of Apple FaceTime is being monitored. Apple FaceTime belongs to the custom blocked filter. The category of Apple FaceTime is being blocked.

Refer to the exhibit to view the authentication rule configuration. In this scenario, which statement is true?. IP-based authentication is enabled. Route-based authentication is enabled. Session-based authentication is enabled. Policy-based authentication is enabled.

Which of the following statements correctly describes FortiGates route lookup behavior when searching for a suitable gateway? (Choose two). Lookup is done on the first packet from the session originator. Lookup is done on the last packet sent from the responder. Lookup is done on every packet, regardless of direction. Lookup is done on the trust reply packet from the responder.

Which two policies must be configured to allow traffic on a policy-based next-generation firewall (NGFW) FortiGate? (Choose two.). Firewall policy. Policy rule. Security policy. SSL inspection and authentication policy.

Which three CLI commands can you use to troubleshoot Layer 3 issues if the issue is in neither the physical layer nor the link layer? (Choose three.). diagnose sys top. execute ping. execute traceroute. diagnose sniffer packet any.

Which of the following are valid actions for FortiGuard category based filter in a web filter profile proxy- based inspection mode? (Choose two.). Warning. Exempt. Allow. Learn.

Which two statements are true about collector agent standard access mode? (Choose two.). Standard mode uses Windows convention-NetBios: Domain\Username. Standard mode security profiles apply to organizational units (OU). Standard mode security profiles apply to user groups. Standard access mode supports nested groups.

Which two VDOMs are the default VDOMs created when FortiGate is set up in split VDOM mode? (Choose two.). FG-traffic. Mgmt. FG-Mgmt. Root.

An administrator needs to increase network bandwidth and provide redundancy. What interface type must the administrator select to bind multiple FortiGate interfaces?. VLAN interface. Software Switch interface. Aggregate interface. Redundant interface.

Which CLI command will display sessions both from client to the proxy and from the proxy to the servers?. diagnose wad session list. diagnose wad session list | grep hook-pre&&hook-out. diagnose wad session list | grep hook=pre&&hook=out. diagnose wad session list | grep "hook=pre"&"hook=out".

Which statements best describe auto discovery VPN (ADVPN). (Choose two.). It requires the use of dynamic routing protocols so that spokes can learn the routes to other spokes. ADVPN is only supported with IKEv2. Tunnels are negotiated dynamically between spokes. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance.

An administrator observes that the port1 interface cannot be configured with an IP address. What can be the reasons for that? (Choose three.). The interface has been configured for one-arm sniffer. The interface is a member of a virtual wire pair. The operation mode is transparent. The interface is a member of a zone. Captive portal is enabled in the interface.

NGFW mode allows policy-based configuration for most inspection rules. Which security profile's configuration does not change when you enable policy-based inspection?. Web filtering. Antivirus. Web proxy. Application control.

An administrator created a static route for Amazon Web Services. What CLI command must the administrator use to view the route?. get router info routing-table all. get internet service route list. get router info routing-table database. diagnose firewall proute list.

Refer to the exhibit to view the application control profile. Based on the configuration, what will happen to Apple FaceTime?. Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration. Apple FaceTime will be allowed, based on the Apple filter configuration. Apple FaceTime will be allowed only if the filter in Application and Filter Overrides is set to Learn. Apple FaceTime will be allowed, based on the Categories configuration.

Which statement about the log message is true?. The action for the category Games is set to block. The usage quota for the IP address 10.0.1.10 has expired. The name of the applied web filter profile is default. The web site miniclip.com matches a static URL filter whose action is set to Warning.

You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk. What is the default behavior when the local disk is full?. Logs are overwritten and the only warning is issued when log disk usage reaches the threshold of 95%. No new log is recorded until you manually clear logs from the local disk. Logs are overwritten and the first warning is issued when log disk usage reaches the threshold of 75%. No new log is recorded after the warning is issued when log disk usage reaches the threshold of 95%.

A network administrator has enabled full SSL inspection and web filtering on FortiGate. When visiting any HTTPS websites, the browser reports certificate warning errors. When visiting HTTP websites, the browser does not report errors. What is the reason for the certificate warning errors?. The browser requires a software update. FortiGate does not support full SSL inspection when web filtering is enabled. The CA certificate set on the SSL/SSH inspection profile has not been imported into the browser. There are network connectivity issues.

The exhibits show a network diagram and the explicit web proxy configuration.In the command diagnose sniffer packet, what filter can you use to capture the traffic between the client and the explicit web proxy?. host 192.168.0.2 and port 8080. host 10.0.0.50 and port 80. host 192.168.0.1 and port 80. host 10.0.0.50 and port 8080.

In an explicit proxy setup, where is the authentication method and database configured?. Proxy Policy. Authentication Rule. Firewall Policy. Authentication scheme.

An administrator must disable RPF check to investigate an issue. Which method is best suited to disable RPF without affecting features like antivirus and intrusion prevention system?. Enable asymmetric routing, so the RPF check will be bypassed. Disable the RPF check at the FortiGate interface level for the source check. Disable the RPF check at the FortiGate interface level for the reply check. Enable asymmetric routing at the interface level.

Examine the IPS sensor and DoS policy configuration shown in the exhibit, then answer the question below. The exhibits show the IPS sensor and DoS policy configuration. When detecting attacks, which anomaly, signature, or filter will FortiGate evaluate first?. SMTP.Login.Brute.Force. IMAP.Login.brute.Force. ip_src_session. Location: server Protocol: SMTP.

An administrator needs to configure VPN user access for multiple sites using the same soft FortiToken. Each site has a FortiGate VPN gateway. What must an administrator do to achieve this objective?. The administrator can register the same FortiToken on more than one FortiGate. The administrator must use a FortiAuthenticator device. The administrator can use a third-party radius OTP server. The administrator must use the user self-registration server.

If the Issuer and Subject values are the same in a digital certificate, which type of entity was the certificate issued to?. A CRL. A person. A subordinate CA. A root CA.

Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.). Log downloads from the GUI are limited to the current filter view. Log backups from the CLI cannot be restored to another FortiGate. Log backups from the CLI can be configured to upload to FTP as a scheduled time. Log downloads from the GUI are stored as LZ4 compressed files.

An administrator has a requirement to keep an application session from timing out on port 80. What two changes can the administrator make to resolve the issue without affecting any existing services running through FortiGate? (Choose two.). Create a new firewall policy with the new HTTP service and place it above the existing HTTP policy. Create a new service object for HTTP service and set the session TTL to never. Set the TTL value to never under config system-ttl. Set the session TTL on the HTTP policy to maximum.

If Internet Service is already selected as Source in a firewall policy, which other configuration objects can be added to the Source filed of a firewall policy?. IP address. Once Internet Service is selected, no other object can be added. User or User Group. FQDN address.

Which scanning technique on FortiGate can be enabled only on the CLI?. Heuristics scan. Trojan scan. Antivirus scan. Ransomware scan.

The exhibit contains a network interface configuration, firewall policies, and a CLI console configuration. How will FortiGate handle user authentication for traffic that arrives on the LAN interface?. If there is a full-through policy in place, users will not be prompted for authentication. Users from the Sales group will be prompted for authentication and can authenticate successfully with the correct credentials. Authentication is enforced at a policy level; all users will be prompted for authentication. Users from the HR group will be prompted for authentication and can authenticate successfully with the correct credentials.

Which statement is correct if well-known viruses are not being blocked?. The firewall policy does not apply deep content inspection. The firewall policy must be configured in proxy-based inspection mode. The action on the firewall policy must be set to deny. Web filter should be enabled on the firewall policy to complement the antivirus profile.

Which two statements are true about the RPF check? (Choose two.). The RPF check is run on the first sent packet of any new session. The RPF check is run on the first reply packet of any new session. The RPF check is run on the first sent and reply packet of any new session. RPF is a mechanism that protects FortiGate and your network from IP spoofing attacks.

How do you format the FortiGate flash disk?. Load a debug FortiOS image. Load the hardware test (HQIP) image. Execute the CLI command execute formatlogdisk. Select the format boot device option from the BIOS menu.

The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile. What order must FortiGate use when the web filter profile has features enabled, such as safe search?. DNS-based web filter and proxy-based web filter. Static URL filter, FortiGuard category filter, and advanced filters. Static domain filter, SSL inspection filter, and external connectors filters. FortiGuard category filter and rating filter.

Which three methods are used by the collector agent for AD polling? (Choose three.). FortiGate polling. NetAPI. Novell API. WMI. WinSecLog.

Which two statements are true about collector agent advanced mode? (Choose two.). Advanced mode uses Windows convention-NetBios: Domain\Username. FortiGate can be configured as an LDAP client and group filters can be configured on FortiGate. Advanced mode supports nested or inherited groups. Security profiles can be applied only to user groups, not individual users.

The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address. An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies. The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form-based authentication scheme for the FortiGate local user database. Users will be prompted for authentication. How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP 10.0.1.10 to the destination http://www.fortinet.com? (Choose two.). If a Mozilla Firefox browser is used with User-B credentials, the HTTP request will be allowed. If a Google Chrome browser is used with User-B credentials, the HTTP request will be allowed. If a Mozilla Firefox browser is used with User-A credentials, the HTTP request will be allowed. If a Microsoft Internet Explorer browser is used with User-B credentials, the HTTP request will be allowed.

Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?. Custom permission for Network. Read/Write permission for Log & Report. CLI diagnostics commands permission. Read/Write permission for Firewall.

How does the FortiGate handle web proxy traffic coming from the IP address 10.2.1.200 that requires authorization?. It always authorizes the traffic without requiring authentication. It drops the traffic. It authenticates the traffic using the authentication scheme SCHEME2. It authenticates the traffic using the authentication scheme SCHEME1.

Which three statements about security associations (SA) in IPsec are correct? (Choose three.). Phase 2 SAs are used for encrypting and decrypting the data exchanged through the tunnel. An SA never expires. A phase 1 SA is bidirectional, while a phase 2 SA is directional. Phase 2 SA expiration can be time-based, volume-based, or both. Both the phase 1 SA and phase 2 SA are bidirectional.

In consolidated firewall policies, IPv4 and IPv6 policies are combined in a single consolidated policy. Instead of separate policies. Which three statements are true about consolidated IPv4 and IPv6 policy configuration? (Choose three.). The IP version of the sources and destinations in a firewall policy must be different. The Incoming Interface. Outgoing Interface. Schedule, and Service fields can be shared with both IPv4 and IPv6. The policy table in the GUI can be filtered to display policies with IPv4, IPv6 or IPv4 and IPv6 sources and destinations. The IP version of the sources and destinations in a policy must match. The policy table in the GUI will be consolidated to display policies with IPv4 and IPv6 sources and destinations.

Which of the following SD-WAN load–balancing method use interface weight value to distribute traffic? (Choose two.). Source IP. Spillover. Volume. Session.

Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server?. 172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0]. 0.0.0.0/0 [20/0] via 10.4.200.2, port2. 10.4.200.0/30 is directly connected, port2. 172.16.32.0/24 is directly connected, port1.

Which of the following statements are true? (Choose two.). Browsers can be configured to retrieve this PAC file from the FortiGate. Any web request to the 172.25.120.0/24 subnet is allowed to bypass the proxy. All requests not made to Fortinet.com or the 172.25.120.0/24 subnet, have to go through altproxy.corp.com: 8060. Any web request fortinet.com is allowed to bypass the proxy.

Which of the following statements are correct? (Choose two.). This setup requires at least two firewall policies with the action set to IPsec. Dead peer detection must be disabled to support this type of IPsec setup. The Tunnel B route is the primary route for reaching the remote site. The Tunnel A route is used only if the Tunnel B VPN is down. This is a redundant IPsec setup.

Which two statements are true when FortiGate is in transparent mode? (Choose two.). By default, all interfaces are part of the same broadcast domain. The existing network IP schema must be changed when installing a transparent mode. Static routes are required to allow traffic to the next hop. FortiGate forwards frames without changing the MAC address.

To complete the final step of a Security Fabric configuration, an administrator must authorize all the devices on which device?. FortiManager. Root FortiGate. FortiAnalyzer. Downstream FortiGate.

A user behind the FortiGate is trying to go to http://www.addictinggames.com (Addicting Games). Based on this configuration, which statement is true?. Addicting.Games is allowed based on the Application Overrides configuration. Addicting.Games is blocked on the Filter Overrides configuration. Addicting.Games can be allowed only if the Filter Overrides actions is set to Exempt. Addcting.Games is allowed based on the Categories configuration.

The exhibit shows a CLI output of firewall policies, proxy policies, and proxy addresses. How does FortiGate process the traffic sent to http://www.fortinet.com?. Traffic will be redirected to the transparent proxy and it will be allowed by proxy policy ID 3. Traffic will not be redirected to the transparent proxy and it will be allowed by firewall policy ID 1. Traffic will be redirected to the transparent proxy and It will be allowed by proxy policy ID 1. Traffic will be redirected to the transparent proxy and it will be denied by the proxy implicit deny policy.

Which certificate value can FortiGate use to determine the relationship between the issuer and the certificate?. Subject Key Identifier value. SMMIE Capabilities value. Subject value. Subject Alternative Name value.

Refer to the exhibit. Which contains a Performance SLA configuration. An administrator has configured a performance SLA on FortiGate. Which failed to generate any traffic. Why is FortiGate not generating any traffic for the performance SLA?. Participants configured are not SD-WAN members. There may not be a static route to route the performance SLA traffic. The Ping protocol is not supported for the public servers that are configured. You need to turn on the Enable probe packets switch.

Which of the following statements is true regarding SSL VPN settings for an SSL VPN portal?. By default, FortiGate uses WINS servers to resolve names. By default, the SSL VPN portal requires the installation of a client's certificate. By default, split tunneling is enabled. By default, the admin GUI and SSL VPN portal use the same HTTPS port.

If the Services field is configured in a Virtual IP (VIP), which statement is true when central NAT is used?. The Services field prevents SNAT and DNAT from being combined in the same policy. The Services field is used when you need to bundle several VIPs into VIP groups. The Services field removes the requirement to create multiple VIPs for different services. The Services field prevents multiple sources of traffic from using multiple services to connect to a single computer.

Which statements about the firmware upgrade process on an active-active HA cluster are true?(Choose two.). The firmware image must be manually uploaded to each FortiGate. Only secondary FortiGate devices are rebooted. Uninterruptable upgrade is enabled by default. Traffic load balancing is temporally disabled while upgrading the firmware.

According to the certificate values shown in the exhibit, which type of entity was the certificate issued to?. A user. A root CA. A bridge CA. A subordinate.

When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP address is used as the source of the HTTP request?. remote user's public IP address. The public IP address of the FortiGate device. The remote user's virtual IP address. The internal IP address of the FortiGate device.

An administrator has configured two-factor authentication to strengthen SSL VPN access. Which additional best practice can an administrator implement?. Configure Source IP Pools. Configure split tunneling in tunnel mode. Configure different SSL VPN realms. Configure host check.

Which three authentication timeout types are availability for selection on FortiGate? (Choose three.). hard-timeout. auth-on-demand. soft-timeout. new-session. Idle-timeout.

An administrator has configured the WINDOWS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic. What is a possible reason for this?. The IPS filter is missing the Protocol: HTTPS option. The HTTPS signatures have not been added to the sensor. A DoS policy should be used, instead of an IPS sensor. The firewall policy is not using a full SSL inspection profile.

Which downstream FortiGate VDOM is used to join the Security Fabric when split-task VDOM is enabled on all FortiGate devices?. Root VDOM. FG-traffic VDOM. Customer VDOM. Global VDOM.

Refer to the exhibit. Why did the FortiGate drop the packet?. The next-hop IP address is unreachable. It failed the RPF check. It matched an explicitly configured firewall policy with the action DENY. It matched the default implicit firewall policy.

Which of statement is true about SSL VPN web mode?. The tunnel is up while the client is connected. It supports a limited number of protocols. The external network application sends data through the VPN. It assigns a virtual IP address to the client.

When a firewall policy is created, which attribute is added to the policy to support recording logs to a FortiAnalyzer or a FortiManager and improves functionality when a FortiGate is integrated with these devices?. Log ID. Universally Unique Identifier. Policy ID. Sequence ID.

What is the primary FortiGate election process when the HA override setting is disabled?. Connected monitored ports > System uptime > Priority > FortiGate Serial number. Connected monitored ports > HA uptime > Priority > FortiGate Serial number. Connected monitored ports > Priority > HA uptime > FortiGate Serial number. Connected monitored ports > Priority > System uptime > FortiGate Serial number.

Which three pieces of information does FortiGate use to identify the hostname of the SSL server when SSL certificate inspection is enabled? (Choose three.). The subject field in the server certificate. The serial number in the server certificate. The server name indication (SNI) extension in the client hello message. The subject alternative name (SAN) field in the server certificate. The host field in the HTTP header.

Based on the output shown in the exhibit, which two statements are correct? (Choose two.). A local FortiManager is one of the servers FortiGate communicates with. One server was contacted to retrieve the contract information. There is at least one server that lost packets consecutively. FortiGate is using default FortiGuard communication settings.

Which Security rating scorecard helps identify configuration weakness and best practice violations in your network?. Fabric Coverage. Automated Response. Security Posture. Optimization.

Which statement regarding the firewall policy authentication timeout is true?. It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets coming from the user's source IP. It is a hard timeout. The FortiGate removes the temporary policy for a user's source IP address after this timer has expired. It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets coming from the user's source MAC. It is a hard timeout. The FortiGate removes the temporary policy for a user's source MAC address after this timer has expired.

An administrator is running the following sniffer command: diagnose aniffer packet any "host 192.1.68.2.12" 3 Which three pieces of Information will be Included in me sniffer output? (Choose three.). Interface name. Packet payload. Ethernet header. IP header. Application header.

Which two protocol options are available on the CLI but not on the GUI when configuring an SDWAN Performance SLA? (Choose two.). DNS. ping. udp-echo. TWAMP.

Which three statements are true regarding session-based authentication? (Choose three.). HTTP sessions are treated as a single user. IP sessions from the same source IP address are treated as a single user. It can differentiate among multiple clients behind the same source IP address. It requires more resources. It is not recommended if multiple users are behind the source NAT.

Which of the following statements about central NAT are true? (Choose two.). IP tool references must be removed from existing firewall policies before enabling central NAT. Central NAT can be enabled or disabled from the CLI only. Source NAT, using central NAT, requires at least one central SNAT policy. Destination NAT, using central NAT, requires a VIP object as the destination address in a firewall.

What is the effect of enabling auto-negotiate on the phase 2 configuration of an IPsec tunnel?. FortiGate automatically negotiates different local and remote addresses with the remote peer. FortiGate automatically negotiates a new security association after the existing security association expires. FortiGate automatically negotiates different encryption and authentication algorithms with the remote peer. FortiGate automatically brings up the IPsec tunnel and keeps it up, regardless of activity on the IPsec tunnel.

Which statement about the IP authentication header (AH) used by IPsec is true?. AH does not provide any data integrity or encryption. AH does not support perfect forward secrecy. AH provides data integrity but no encryption. AH provides strong data integrity but weak encryption.

Which security feature does FortiGate provide to protect servers located in the internal networks from attacks such as SQL injections?. Denial of Service. Web application firewall. Antivirus. Application control.

An administrator has configured a route-based IPsec VPN between two FortiGate devices. Which statement about this IPsec VPN configuration is true?. A phase 2 configuration is not required. This VPN cannot be used as part of a hub-and-spoke topology. A virtual IPsec interface is automatically created after the phase 1 configuration is completed. The IPsec firewall policies must be placed at the top of the list.

What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.). Traffic to botnetservers. Traffic to inappropriate web sites. Server information disclosure attacks. Credit card data leaks. SQL injection attacks.

FortiGate is configured as a policy-based next-generation firewall (NGFW) and is applying web filtering and application control directly on the security policy. Which two other security profiles can you apply to the security policy? (Choose two.). Antivirus scanning. File filter. DNS filter. Intrusion prevention.

Which of the following is the expected FortiGate behavior regarding these two routes to the same destination?. FortiGate will load balance all traffic across both routes. FortiGate will use the port1 route as the primary candidate. FortiGate will route twice as much traffic to the port2 route. FortiGate will only actuate the port1 route in the routing table.

Which two statements are correct about a software switch on FortiGate? (Choose two.). It can be configured only when FortiGate is operating in NAT mode. Can act as a Layer 2 switch as well as a Layer 3 router. All interfaces in the software switch share the same IP address. It can group only physical interfaces.

The exhibit contains a network diagram, central SNAT policy, and IP pool configuration. The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port3) interface has the IP address 10.0.1.254/24. A firewall policy is configured to allow to destinations from LAN (port3) to WAN (port1). Central NAT is enabled, so NAT settings from matching Central SNAT policies will be applied. Which IP address will be used to source NAT the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?. 10.200.1.149. 10.200.1.1. 10.200.1.49. 10.200.1.99.

Which feature in the Security Fabric takes one or more actions based on event triggers?. Fabric Connectors. Automation Stitches. Security Rating. Logical Topology.

An organization's employee needs to connect to the office through a high-latency internet connection. Which SSL VPN setting should the administrator adjust to prevent the SSL VPN negotiation failure?. Change the session-ttl. Change the login timeout. Change the idle-timeout. Change the udp idle timer.

Examine this FortiGate configuration: config system global set av-failopen pass end Examine the output of the following debug command: # diagnose hardware sysinfo conserve memory conserve mode: on total RAM: 3040 MB memory used: 2948 MB 97% of total RAM memory freeable: 92 MB 3% of total RAM memory used + freeable threshold extreme: 2887 MB 95% of total RAM memory used threshold red: 2675 MB 88% of total RAM memory used threshold green: 2492 MB 82% of total RAM Based on the diagnostic outputs above, how is the FortiGate handling the traffic for new sessions that require inspection?. It is allowed, but with no inspection. It is allowed and inspected as long as the inspection is flow based. It is dropped. It is allowed and inspected, as long as the only inspection required is antivirus.

Which of the following conditions must be met in order for a web browser to trust a web server certificate signed by a third-party CA?. The public key of the web server certificate must be installed on the browser. The web-server certificate must be installed on the browser. The CA certificate that signed the web-server certificate must be installed on the browser. The private key of the CA certificate that signed the browser certificate must be installed on the browser.

Which statements are true regarding firewall policy NAT using the outgoing interface IP address with fixed port disabled? (Choose two.). This is known as many-to-one NAT. Source IP is translated to the outgoing interface IP. Connections are tracked using source port and source MAC address. Port address translation is not used.

Application on a Windows machine <--{SSL VPN} -->FGT--> Telnet to Linux server. An administrator is investigating a problem where an application establishes a Telnet session to a Linux server over the SSL VPN through FortiGate and the idle session times out after about 90 minutes. The administrator would like to increase or disable this timeout. The administrator has already verified that the issue is not caused by the application or Linux server. This issue does not happen when the application establishes a Telnet connection to the Linux server directly on the LAN. What two changes can the administrator make to resolve the issue without affecting services running through FortiGate? (Choose two.). Set the maximum session TTL value for the TELNET service object. Set the session TTL on the SSLVPN policy to maximum, so the idle session timeout will not happen after 90 minutes. Create a new service object for TELNET and set the maximum session TTL. Create a new firewall policy and place it above the existing SSLVPN policy for the SSL VPN traffic, and set the new TELNET service object in the policy.

Which two actions can you perform only from the root FortiGate in a Security Fabric? (Choose two.). Shut down/reboot a downstream FortiGate device. Disable FortiAnalyzer logging for a downstream FortiGate device. Log in to a downstream FortiSwitch device. Ban or unban compromised hosts.

What devices form the core of the security fabric?. Two FortiGate devices and one FortiManager device. One FortiGate device and one FortiManager device. Two FortiGate devices and one FortiAnalyzer device. One FortiGate device and one FortiAnalyzer device.

Refer to the exhibit. Which contains a network diagram and routing table output. The Student is unable to access Webserver. What is the cause of the problem and what is the solution for the problem?. The first packet sent from Student failed the RPF check. This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. The first reply packet for Student failed the RPF check. This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. The first reply packet for Student failed the RPF check. This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. The first packet sent from Student failed the RPF check. This issue can be resolved by adding a static route to 203.0.114.24/32 through port3.

Refer to the exhibits. The exhibits show the firewall policies and the objects used in the firewall policies. The administrator is using the Policy Lookup feature and has entered the search criteria shown in the exhibit. Which policy will be highlighted, based on the input criteria?. Policy with ID 4. Policy with ID 5. Policies with ID 2 and 3. Policy with ID 4.

An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings. What is true about the DNS connection to a FortiGuard server?. It uses UDP 8888. It uses UDP 53. It uses DNS over HTTPS. It uses DNS over TLS.

Refer to the exhibits Exhibit A shows a topology for a Fortigate HA cluster that performs proxy-based inspection. Exhibit B shows the HA configuration and the partial output of the get systems ha status command. Based on the exhibits, wich two statements about the traffic passing trough the cluster are true? (Choose two). For non load-balanced connections, packets forwarded by the cluster to the server contain the virtual MAC address of the port2 as source. The traffic sourced from the client and destined to the server is sent to FGT-1. The cluster can load-balance ICMP connections to the secondary. For load-balanced connections, the primary encapsulates TCP SYN packets before forwarding them to the secondary.

Refer to the exhibit. Based on the raw log, which two statements are correct? (Choose two.). Log severity is set to error on FortiGate. Traffic belongs to the root VDOM. Traffic is blocked because Action is set to DENY in the firewall policy. This is a security log.

An administrator wants to simplify remote access without asking users to provide user credentials. Which access control method provides this solution?. ZTNA full mode. SSL VPN. L2TP. ZTNA IP/MAC filtering mode.

Which statement is correct regarding the security fabric?. FortiManager is one of the required member devices. FortiGate devices must be operating in NAT mode. A minimum of two Fortinet devices is required. FortiGate Cloud cannot be used for logging purposes.

Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.). Extended authentication (XAuth) for faster authentication because fewer packets are exchanged. Extended authentication (XAuth) to request the remote peer to provide a username and password. No certificate is required on the remote peer when you set the certificate signature as the authentication method. Pre-shared key and certificate signature as authentication methods.

Which three security features require the intrusion prevention system (IPS) engine to function? (Choose three.). Web filter in flow-based inspection. Antivirus in flow-based inspection. DNS filter. Web application firewall. Application control.

An organization requires remote users to send external application data running on their PCs and access FTP resources through an SSL/TLS connection. Which FortiGate configuration can achieve this goal?. SSL VPN bookmark. SSL VPN tunnel. Zero trust network access. SSL VPN quick connection.

Which statement is true about the session diagnostic output?. The session is in TCP ESTABLISHED state. The session is a bidirectional UDP connection. The session is a UDP unidirectional state. The session is a bidirectional TCP connection.

Which two options are purposes of NAT traversal in IPsec? (Choose two.). To force a new DH exchange with each phase 2 rekey. To detect intermediary NAT devices in the tunnel path. To encapsulate ESP packets in UDP packets using port 4500. To dynamically change phase 1 negotiation mode to aggressive mod.

A team manager has decided that, while some members of the team need access to a particular website, the majority of the team does not. Which two configuration changes are the most effective way to support this requirement? (Choose two.). Implement web filter quotas for the specified website. Implement a firewall policy with authentication for the specified users. Implement a DNS filter for the specified website. Implement web category authentication for the specified website using a web filter profile.

If Internet Service is already selected as Destination in a firewall policy, which other configuration objects can be selected for the Destination field of a firewall policy?. IP address. User or User Group. No other object can be added. FQDN address.

A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 fails to come up. The administrator has also re-entered the pre- shared key on both FortiGate devices to make sure they match. Based on the phase 1 configuration and the diagram shown in the exhibit, which two configuration changes will bring phase 1 up? (Choose two.). On HQ-FortiGate, set IKE mode to Main (ID protection). On both FortiGate devices, set Dead Peer Detection to On Demand. On HQ-FortiGate, disable Diffie-Helman group 2. On Remote-FortiGate, set port2 as Interface.