TECNI DATA

The fuel system consists mainly of ?. Tank 1 & 2, ctrl tank, Fuel Vent system, pressure Filling. Fuel feed system, Indrcatıng and Warnıng. Tank l & 2, ctrl tank, Fuel Vent system, depressurize pump, Isolation valve. Baffle valves, Tank l& 2, ctrl tank, Fuei Vent system, temperature indication of ctrl, Tank.

The manually defueling valve can be used far ?. feed the engine. Transfer fuel tank to tank and defuel opeeration. Only for defueling.

On the cockpit and normal operation: What lights are illumınated if all switches are OFF of the fuel panel pumps?. CENTER TANK LOW PRESSURE LIGHTS ARE ON. RH TANK LOW PRESSURE LIGHTS IS ON ONLY. LH & RH tank LOW PRESSURE LIGHTS ARE ON.

The Fuel Temperature Indicator reads the temperature of the fuel in ?. The Centre tank. The No. 2 tank. The No. 1 tank.

The main fuel storage areas are divided in. Four integral fuel tanks. Three integral fuel tanks. One integral fuel tank.

Normally Fuel is delivered to the APU from what main tank?. Tank No 1. Tank No 2. Center tank.

In the fuel system, when is possible to do a transferring from one tank to another?. For flight operation only. For ground operation only. For both operation.

What is the function of the baffle check valves?. Prevent fuel flow in the outboard direction. Prevent fuel flow in the inboard direction. Permit fuel flow in the outboard direction.

What is the Function of the Cross feed Valve Position Indication Light?. Indicates the Pasition of the crossfeed valve (Valve open, Valve Close ,Valve in Transit or Disagree). Indicates when is operating only a defueling operation. Indicates only when the Crossfeed valve is closed or open.

Where is located the pressure fueling panel ?. LH wing LE side. RH wing LE SIde. Below Belly fairing RH side.

The measuring sticks are used to ?. Are used to determine fuel quantity. Are used to determine fuel quality. Are used to determine the fuel flow.

What is the purpase of the fuel vent system?. Prevent damage to the tank structure by limiting venting of all fuel tanks in high altitudes. Prevent damage to the tank structure by providing negative venting of all fuel tanks. Prevent damage to the tank structure by providing positive venting of all fuel tanks.

13. How many boast pumps are installed in the fuel system?. 6 hydraulic & fuel Boost pumps. 6 fuel Boost pumps. 4 fuel Bogst pumps.

Where is located the manually defueling valve?. Next to the pressure fueling RH wing. Next to the pressure fueling LH wing. Next to the RH main tank sump drain valve.

How many LCD fuel quantity indicators are in the fuel system?. Only three, locaręd on cockpit. 6LCD qantity indcator. Only three, located on the fueling pressure panel.

What is the purpose of the center tank drain valve?. Is used for supply fuel. Is used for supply and drain the accumulated moisture and trapped fuel. Is used for dra ning the accumulated moisture and trapped fuel remaining after defueling.

Select the correct answer transferring fuel from No. 1 tank to No. 2 tank?. Select ON the No. 1 Boost Pumps, OPEN the Cross feed valve OPEN the manual defueling valve., OPEN No. 2 tank fueling valve. De-select the No. 1 & No. 2 Main fuel tanks , OPEN the Cross feed valve ,OPEN the manual defuelıng valve, OPEN No. 2 tank fueling valve. Select OFF the No. 1 Boost Pumps, CLOSE the Cross feed valve ,oPEN the manual defueling valve OPEN No. 2 tank fueling valve.

What is maximum Fueling pressure?. 65 psi. 55-psi. 45 psi.

How many fueling valve postion lights in the fueling panel. Just one blue light. Three blue.lights. Three amber lights.

Where this located the acces to enter the central tank?. Located in the RH air condıtioned air bay. Located in the LH air conditioned air bay. Located in the CENTER of the aircraft.