Tigre 3

Refer to the exhibit. DNSqueries from two internal DNS servers are being load-balanced to external DNS servers via a virtual server on a BIG-IP device. The DNS queries originate from: 192.168.10.100 192.168.10.200 and target: 192.168.2.150 All DNS queries destined for the external DNS servers fail. Which property change should the BIG-IP Administrator make in the Virtual Server to resolve this issue? (Choose one answer). Protocol profile (Client) to DNS_OPTIMIZED. Type to Performance (HTTP). Source Address to 192.168.10.0/24. Protocol to UDP.

A BIG-IP Administrator finds the following log entry after a report of user issues connecting to a virtual server: 01010201: Intercept exhaustion on 10.70.110.112 to 192.28.123.250:80 (proto 6) Howshould the BIG-IP Administrator modify the SNAT pool that is associated with the virtual server? (Choose one answer). Increase the timeout of the SNAT addresses. Remove the SNATpool and apply SNAT Automap. Remove anIP address from the SNAT pool. Add anIP address to the SNAT pool.

A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers. Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server? (Choose one answer). Least Connections (node). Predictive (member). Least Connections (member). Predictive (node).

The BIG-IP Administrator is investigating whether better TCP performance is possible for a virtual server. Which built-in profile should be tried first? (Choose one answer). f5-tcp-legacy. f5-tcp-progressive. f5-tcp-mobile. Nooption.

Refer to the exhibit A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers. Whatshould the BIG-IP Administrator do to resolve the issue? (Choose one answer). Set Protocol to UDP. Set Source Address to 10.1.1.2. Set Destination Address/Mask to 0.0.0.0/0. Set HTTP Profile to None.

The BIG-IP Administrator needs to load balance a pool of web servers. Load balancing should consider the number of connections that are active on that pool member. Which load balancing method meets this requirement? (Choose one answer). Least Connections (member). Round Robin. Ratio (member). Ratio (node).

A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B. Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable? (Choose one answer). HTTPS, HTTP, FTP, and SSH with the Availability Requirement of all health monitors. HTTP, HTTPS, FTP, and ICMP with the Availability Requirement of at least one health monitor. HTTPS, HTTP, FTP, and SSH with the Availability Requirement of at least one health monitor. HTTPS, HTTP, FTP, and SSH with the Availability Requirement of all health monitors.

All pool members are online. All other virtual server settings are at default. Whatmight alter the load balancing behavior? (Choose one answer). Adding a OneConnect profile. Enabling SNAT automap. Enabling a fallback host in the HTTP profile. Adding a persistence profile.

Which persistence profile would be the most appropriate to ensure an HTTP web request connects to the same pool member?(Choose one answer). . Destination address. Hash persistence. SSL persistence. Cookie persistence.

A BIG-IP Administrator needs to apply persistence to a virtual server that is configured as a Performance (Layer 4) virtual server that allows access to a secure (TLS) e-commerce website. Whattype of persistence profile can be used? (Choose one answer). Source Address Affinity. Cookie persistence. Microsoft RDP persistence. Host persistence.

A Virtual Server uses an iRule to send traffic to pool members depending on the URI. The BIG-IP Administrator needs to modify the pool member in the iRule. Which event declaration does the BIG-IP Administrator need to change to accomplish this?. CLIENT_ACCEPTED. HTTP_RESPONSE. HTTP_REQUEST. SERVER_CONNECTED.

A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers. Whatshould the BIG-IP Administrator do to resolve the issue?. Set Protocol to UDP. Set HTTP Profile to None. Set Source Address to 10.1.1.2. Set Destination Address/Mask to 0.0.0.0/0.

Whatis the status of a pool member when manual resume is enabled and a health check first fails and then passes?. Offline (Disabled). Offline (Enabled). Available (Disabled). Available (Enabled).

Some users whoconnect to a busy Virtual Server have connections reset by the BIG-IP system. Pool memberresources are NOT a factor. Whatis a possible cause?. Connection Rate Limit is set too high. Server SSL profile not reconfigured. Connection Limit is set too low. Rewrite profile not configured.

Anorganization reports slow performance accessing an Intranet website. All employees use a single proxy IP. Whatshould the BIG-IP Administrator do?. Change Source Address to proxy IP. Change Load Balancing to Least Connections. Change Fallback Persistence to source_addr. Change Default Persistence to cookie.

A Standard Virtual Server is configured with SNAT Automap. Backend servers must see the original client IP. Whatshould be configured?. Performance (HTTP) VS. HTTP profile with X-Forwarded-For. HTTP Transparent profile. SNAT pool with client IP.

A BIG-IP Administrator adds new pool members to a highly utilized pool. The application begins failing. Whatpool-level setting should be checked?. Availability Requirement. Allow SNAT. Action OnService Down. Slow RampTime.

Which type of Virtual Server requires the use of a FastL4 profile?. Performance (Layer 4). Stateless. Performance (HTTP). Standard.

Due to achange in application requirements, a BIG-IP Administrator needs to modify the configuration of a Virtual Server to include a Fallback Persistence Profile. Which persistence profile type should the BIG-IP Administrator use?. SSL. Hash. Universal. Source Address Affinity.

Which Virtual Server type prevents the use of a default pool?. Performance (Layer 4). Forwarding (IP). Performance (HTTP). Standard.

Anorganization is reporting slow performance accessing their Intranet website. All employees use a single Proxy Server with a public IP. Whatshould the BIG-IP Administrator do to fix this issue?. Change Source Address to proxy IP. Change Load Balancing Method to Least Connections. Change Fallback Persistence Profile to source_addr. Change Default Persistence Profile to cookie.

A Standard Virtual Server for a web application is configured with SNAT Automap. The original client IP must be known by backend servers. Whatshould the BIG-IP Administrator configure?. Performance (HTTP) Virtual Server. HTTP profile with X-Forwarded-For. HTTP Transparent profile. SNAT pool using client IP.

A BIG-IP Administrator adds new pool members into a highly utilized pool. Users report application failures. Which pool-level setting should be checked?. Availability Requirement. Allow SNAT. Action OnService Down. Slow RampTime.

A nodeis a memberofmultiple pools hosting different web applications. If one application fails, only that pool member should be marked down . What should be configured?. UDP monitor. ICMP + TCP monitor. HTTP monitor with custom send/receive. TCP monitor.

A Standard Virtual Server reports poor performance for Internet users. WhatTCP profile configuration should be applied?. Client: f5-tcp-wan / Server: f5-tcp-lan. Client: f5-tcp-lan. Client: f5-tcp-lan / Server: f5-tcp-wan. Client: f5-tcp-optimized.

During high-demand traffic events, the BIG-IP Administrator needs to limit new connections per second. Whatshould be applied?. HTTP Compression profile. Connection rate limit. Connection limit. OneConnect profile.

Users are unable to reach an application. The Virtual Server shows a red diamond status. Whatis the cause?. All pool members are down. HTTPS traffic sent to HTTP VS. Virtual Server disabled. Pool members disabled.

A BIG-IP Administrator adds new pool members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. Whatpool-level setting should the BIG-IP Administrator check?. Availability Requirement. Allow SNAT. Action OnService Down. Slow RampTime.

A Standard Virtual Server for a web application is configured with Automap for Source Address Translation. The original client IP must be known by backend servers. Whatshould the BIG-IP Administrator configure?. Performance (HTTP) Virtual Server. HTTP profile to insert X-Forwarded-For. HTTP Transparent profile. SNAT pool using client IP.

A nodeis a memberofmultiple pools and hosts different applications. If one application becomes unavailable, only that pool member should be marked down. Whatshould the BIG-IP Administrator deploy?. UDP monitor. ICMP + TCP monitor. HTTP monitor with custom send/receive. TCP monitor.

A Standard Virtual Server reports poor network performance for Internet-based clients. Whatconfiguration should be applied?. Client TCP: f5-tcp-wan / Server TCP: f5-tcp-lan. Client TCP: f5-tcp-lan. Client TCP: f5-tcp-lan / Server TCP: f5-tcp-wan. Client TCP: f5-tcp-optimized.

During a high-demand event, the BIG-IP Administrator needs to limit the number of new connections per second to a Virtual Server. Whatshould be applied?. HTTP Compression profile. Connection Rate Limit. Connection Limit. OneConnect profile.

Users are unable to reach an application. The Virtual Server shows a red diamond status in the Configuration Utility. Whatis the cause?. All pool members are down. HTTPS traffic sent to HTTP Virtual Server. Virtual Server is disabled. All pool members are disabled.

DNSqueries from internal DNS servers fail when sent through a BIG-IP Virtual Server. Which Virtual Server property should be changed?. Protocol Profile (Client) to DNS_OPTIMIZED. Type to Performance (HTTP). Protocol to UDP. Source Address to subnet.

A BIG-IP Administrator configures an SSH pool with five members. Which health monitor should be applied?. HTTPS. UDP. HTTP. TCP.

A BIG-IP Administrator needs to configure health monitors for a pool containing HTTP, HTTPS, FTP, and SSH services. Which configuration ensures accurate member status?. All monitors with Availability Requirement = all. All monitors with Availability Requirement = at least one. ICMP + TCP with all. HTTP and HTTPS only.

All pool members are online and all other settings are default. Whatmight alter the load balancing behavior?. Adding a OneConnect profile. Enabling SNAT Automap. Enabling an HTTP fallback host. Adding a persistence profile.

The BIG-IP Administrator has to provide encrypted communication between users and the virtual server they access. Multiple hostnames are configured in DNS with the same IP address. Which profile type and setting in the profile should be used? (Choose one answer). Client SSL, Client Name. Server SSL, Server Name. Client SSL, Server Name. Server SSL, Client Name.

In a pool there are 2 pool members (older servers) that can handle fewer connections than the other 3 newer servers. Which load balancing method would allow more traffic to be directed to the newer servers? (Choose one answer). Global Availability. Weighted Least Connections (member). Round Robin. Least Connections (member).

The BIG-IP Administrator has to provide encrypted communication between the users and the virtual server they access. Multiple hostnames are configured in DNS with the same IP address. Which profile type and setting in the profile should be used? (Choose one answer). Client SSL, Client Name. Server SSL, Server Name. Client SSL, Server Name. Server SSL, Client Name.

Application administrators are reporting that nodes different from those configured in the pool are selected. The use of an iRule is suspected. Howcanthe BIG-IP Administrator check if an iRule is used for this traffic? (Choose two answers). Via TMSH with the list /ltm rule <irule> command. Via the GUI at the Resources tab for the virtual server. Via TMSH with the list /ltm virtual <virtual_server> command. Via the GUI at the iRule tab for the virtual server.

In a pool there are 2 pool members out of the 5 members that are older servers. The number of connections these can handle is less than the other 3 pool members. Which load balancing method would allow more traffic to be directed to the newer servers? (Choose one answer). Global Availability. Weighted Least Connections (member). Round Robin. Least Connections (member).

A webserver administrator informs the BIG-IP Administrator that web servers currently load balanced require encrypted traffic. Starting next month, the web server administrator will offload SSL. Starting next month, the BIG-IP device will terminate SSL to reduce web server load. The BIG-IP device is already using Client SSL, Client port, and iRules on HTTP traffic. What actions should the BIG-IP Administrator take to achieve the desired configuration? (Choose one answer). Remove the server SSL profile and configure the pool members to use HTTP. Remove the client SSL profile and configure the pool members to use HTTP. Remove the server SSL profile and change the Virtual Server to accept HTTP traffic. Remove the client SSL profile and change the Virtual Server to accept HTTP traffic.

A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly. What should the administrator do to solve this issue? (Choose one answer). Disable Address Translation. Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet as the servers. Set Address Translation to SNAT and configure a specific translation address. Set Address Translation to SNAT and have a self-IP configured in the same subnet as the servers.

A virtual server is configured to offload SSL from a pool of backend servers. When users connect to the virtual server, they successfully establish an SSL connection but no content is displayed. A packet trace performed on the server shows that the server receives and responds to the request. What should a BIG-IP Administrator do to resolve the problem? (Choose one answer). enable Server SSL profile. disable Server SSL profile. disable SNAT. enable SNAT.

A BIG-IP Administrator configures a node with a standard icmp Health Monitor. The Node shows as DOWNalthough the Backend Server is configured to answer ICMP requests. Which step should the administrator take next to find the root cause of this issue?. Run aqkview. Run a tcpdump. Run an ssldump. Run acurl.

A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working. Which additional configuration is required to resolve this issue?. Configure SSL Profile (Client). Configure Protocol Profile (Server). Configure SSL Profile (Server). Configure Service Port to HTTP.

A BIG-IP Administrator creates an HTTP Virtual Server using an iApp template. After the Virtual Server is created, the user requests to change the destination IP addresses. The BIG-IP Administrator tries to change the destination IP address from 10.1.1.1 to 10.2.1.1 in Virtual Server settings, but receives the following error: "The application service must be updated using an application management interface." What is causing this error?. The Application Services have Strict Updates enabled. The IP addresses are already in use. The IP addresses used are NOT from the same subnet as the Self IP. The Application Service was NOT deleted before making the IP address change.

A BIG-IP Administrator configures a new VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device. Which VLAN setting should be changed to prevent this issue?. Auto Last Hop. Source Check. Fail-safe. Customer Tag.

In a pool there are 2 pool members out of the 5 members that are older servers. The number of connections these can handle is less than the other 3 pool members. Which load balancing method would allow more traffic to be directed to the newer servers?. Weighted Least Connections (member). Global Availability. Round Robin. Least Connections (member).

All pool members are online. All other virtual server settings are at default. What might alter the load balancing behavior?. Adding a oneconnect profile. Adding a persistence profile. Enabling a fallback host in the http profile. Enabling SNAT automap.

Which of the following has iApp configured objects?. ltm virtual /Common/vmware_test.app/vmware_test_proxy_https {app-service /Common/vmware_test.app/vmware_testcreation-time 2024-04-12:08:49:12destination /Common/10.155.47.199:443ip-protocol tcplast-modified-time 2024-04-12:08:49:12mask 255.255.255.255profiles {/Common/ppp {}/Common/rba {}/Common/vdi {}/Common/vmware_test.app/vmware_test {}/Common/vmware_test.app/vmware_test_client_ssl {context clientside}/Common/vmware_test.app/vmware_test_connect {context clientside}/Common/vmware_test.app/vmware_test_http {}/Common/vmware_test.app/vmware_test_lan_optimized_tcp {context serverside}/Common/vmware_test.app/vmware_test_server_ssl {context serverside}/Common/vmware_test.app/vmware_test_wan_optimized_tcp {context clientside}/Common/websso {}}serverssl-use-sni disabledsource 0.0.0.0/0source-address-translation {type automap}translate-address enabledtranslate-port enabled}. ltm virtual /Common/app2_vs {creation-time 2020-02-07:09:48:01description https://app2.apmsupport.localdestination /Common/10.155.47.161:443ip-protocol tcplast-modified time2024-05-13:06:02:40mask 255.255.255.255pool /Common/https_lamp_poolprofiles {/Common/apm_support {context clientside}/Common/f5-tcp-progressive {}/Common/http {}/Common/multi_domain_ap {}/Common/rba {}/Common/serverssl {context serverside}/Common/websso {}}serverssl-use-sni disabledsource 0.0.0.0/0source-address translation {type automap}translate-address enabledtranslate-port enabled}. ltm virtual /Common/test_vs {creation-time 2023-09-01:12:28:27destination /Common/10.176.21.11:443disabledip-protocol tcplast-modified-time 2023-09-01:12:29:40mask 255.255.255.255profiles {/Common/fastL4 {}}serverssl-use-sni disabledsource 0.0.0.0/0translate address enabledtranslate-port enabled}. ltm virtual /Common/app1_vs {creation-time 2020-02-07:09:47:12description https://app1.apmsupport.localdestination /Common/10.155.47.160:443ip-protocol tcplast-modified time2024-05-15:09:57:19mask 255.255.255.255pool /Common/https_lamp_poolprofiles {/Common/apm_support {context clientside}/Common/f5-tcp-progressive {}/Common/http {}/Common/multi_domain_ap {}/Common/oneconnect {}/Common/rba {}/Common/serverssl {context serverside}/Common/websso {}}serverssl-use-sni disabledsource 0.0.0.0/0source-address translation {type automap}translate-address enabledtranslate-port enabled}.

Application administrators are reporting that nodes different from those configured in the pool are selected. The use of an iRule is suspected. How can the BIG-IP Administrator check if an iRule is used for this traffic? (Pick the 2 correct responses below). Via TMSH with the list /ltm rule <irule> command. Via TMSH with the list /ltm virtual <virtual_server> command. Via the GUI at the iRule tab for the virtual server. Via the GUI at the Resources tab for the virtual server.

AnLTMdevice has a virtual server mapped to www.f5.com with a pool assigned. The objects are defined as follows: Virtual server: Destination 192.168.245.100:443 netmask 255.255.255.0. Persistence: Source address persistence netmask 255.0.0.0. SNAT: Automap. Profiles: HTTP/TCP. How should the BIG-IP Administrator modify the persistence profile so that each unique IP address creates a persistence record?. netmask 255.255.255.0. netmask 0.0.0.0. netmask 255.255.0.0. netmask 255.255.255.255.

Due to achange in application requirements, a BIG-IP Administrator needs to modify the configuration of a Virtual Server to include a Fallback Persistence Profile. Which persistence profile type should the BIG-IP Administrator use for this purpose?. Universal. Source Address Affinity. SSL. Hash.

Users report that traffic is negatively affected every time a BIG-IP device fails over. The traffic becomes stabilized after a few minutes. What should the BIG-IP Administrator do to reduce the impact of future failovers?. Set up Failover Method to HA Order. Enable Failover Multicast Configuration. Configure MAC Masquerade. Configure a global SNAT Listener.

A BIG-IP Administrator needs to modify a virtual server that will offload web traffic compression tasks from the target server. Which two profiles must the BIG-IP Administrator apply to a virtual server to enable compression? (Pick the 2 correct responses below). Persistence profile. Compression profile. Server SSL profile. Stream profile. HTTP profile.

A configuration change is made on the standby member of a device group. What is displayed as "Recommended Action"on the Device Management Overview screen?. Force active member of device group to standby. Activate device with the most recent configuration. Synchronize the active member configuration to the group. Synchronize the standby member configuration to the group.

A BIG-IP Administrator finds the following log entry: tmm tmm[714]: 011e0002:4: sweeper_update: aggressive mode activated. Which action should the BIG-IP administrator take to mitigate this memory issue?. Configure the redundant pair to be active-active. Decrease the TCP profile Idle Timeout value. Increase the TCP profile Idle Timeout value. Configure the virtual server to use Connection Mirroring.

A BIG-IP Administrator needs to apply a health monitor for a pool of database servers named DB_Pool that uses TCP port 1521. Where should the BIG-IP Administrator apply this monitor?. Local Traffic > Profiles > Protocol > TCP. Local Traffic > Pools > DB.Pool > Properties. Local Traffic > Nodes > Default Monitor. Local Traffic > Pools > DB.Pool > Members.

A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers. Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server?. Predictive (node). Least Connections (node). Predictive (member). Least Connections (member).

A set of servers is used for an FTP application as well as an HTTP website via separate BIG-IP Pools. The server support team reports that some servers are receiving a lot more traffic than others. Which Load Balancing Method should the BIG-IP Administrator apply to even out the connection count?. Ratio (Node). Least Connections (Member). Ratio (Member). Least Connections (Node).

A BIG-IP Administrator is setting up a new BIG-IP device. The network administrator reports that the interface has an incompatible media speed. The BIG-IP Administrator needs to change this setting manually. From which location should the BIG-IP Administrator perform this task?. Onthe Front Console. In the TMOS Shell Command line. In the Configuration Utility, Network > Interface. In the Configuration Utility, System > Configuration.

For a given Virtual Server, the BIG-IP must perform SSL Offload and negotiate secure communication over TLSv1.2 only. What should the BIG-IP Administrator do to meet this requirement?. Configure a custom SSL Profile (Client) with a custom TLSv1.2 cipher string. Configure a custom SSL Profile (Server) and select no TLSv1 in the options list. Configure a custom SSL Profile (Server) with a custom TLSv1.2 cipher string. Configure a custom SSL Profile (Client) and select no TLSv1 in the options list.

HowcanaBIG-IP Administrator identify a configuration object that has been configured within an iApp?. In both the GUI and the CLI the path will repeat the name of the object with .app appended to it, and the object type will be appended to the name. Example: ltm virtual /Common/testhttp.app/testhttp_vs. Using the CLI run the appropriate tmsh command to view the path and see the .app in it and the object type will be appended to the name. Example: ltm virtual /Common/testhttp.app/testhttp.vs. In both the GUI and the CLI the path will repeat the name of the object with .app appended to it and then name ofthe object. Example: ltm virtual /Common/testhttp.app/testhttp.

Where in the configuration utility should the BIG-IP Administrator verify the pool member currently assigned to a pool is on port 80?. Local Traffic > Nodes: Node List. Select the node in question, view the Health Monitor next to Configuration. Local Traffic > Pools: Pool List. Select the pool in question, select Members tab, view the configured Health Monitor. Local Traffic > Pools: Pool List. Select the pool in question, select the Members tab, view the configured Service Port.

A BIG-IP Administrator configures a Virtual Server to load balance traffic between 50 webservers for an ecommerce website. Traffic is being load balanced using the Least Connections (node) method. The webserver administrators report that customers are losing the contents from their shopping carts and are unable to complete their orders. What should the BIG-IP Administrator do to resolve the issue?. Change Default Persistence Profile setting to cookie. Change Default Persistence Profile setting to sip_info. Change Load Balancing method to Ratio (node). Change Load Balancing method to Ratio (member).

A Standard Virtual Server for a web application is configured with Automap for the Source Address Translation option. The original source address of the client must be known by the backend servers. Whatshould the BIG-IP Administrator configure to meet this requirement?. The Virtual Server type as Performance (HTTP). An HTTP profile to insert the X-Forward-For header. A SNATPool with the client IP. An HTTP Transparent profile.

Howwill the BIG-IP system distribute the traffic based on the configuration below? pool my_pool { lb_mode fastest min_active_members 2 member10.12.10.7:80 priority 3 member10.12.10.8:80 priority 3 member10.12.10.9:80 priority 3 member10.12.10.4:80 priority 2 member10.12.10.5:80 priority 2 member10.12.10.6:80 priority 2 member10.12.10.1:80 priority 1 member10.12.10.2:80 priority 1 member10.12.10.3:80 priority 1 } (Pick the 2 correct responses below). Connections are first distributed to all pool members with priority 3 when all the pool members with priority 3 are available. If both the priority 1 group and the priority 2 group have fewer than two members available, traffic is directed to the priority 3 group. If both the priority 3 group and the priority 2 group have fewer than two members available, traffic is directed to the priority 1 group. Connections are distributed to all pool members with priority 2 if one pool member with priority 3 is down.

A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B. Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable?. HTTPS, HTTP, FTP, and SSH, with the Availability Requirement of at least one monitor. HTTPS and HTTP with the Availability Requirement of at least one health monitor. HTTPS, HTTP, FTP, and ICMP, with the Availability Requirement of all health monitors. HTTPS, HTTP, FTP, and SSH with the Availability Requirement of all health monitors.

A virtual server is configured to offload SSL from a pool of backend servers. When users connect to the virtual server, they successfully establish an SSL connection but no content is displayed. A packet trace performed on the server shows that the server receives and responds to the request. What should a BIG-IP Administrator do to resolve the problem?. enable Server SSL profile. enable SNAT. disable Server SSL profile. disable SNAT.

A BIG-IP Administrator creates a new VLAN on BIG-IP Cluster Member A and attaches an interface to it. Although the Auto Config Sync is in place, the new VLAN does NOT show up on Cluster Member B. Whatshould the BIG-IP Administrator do to ensure the new VLAN is configured on each Cluster Member?. Configure a Default Route for the new VLAN on Cluster Member A. Enable the Interface that is attached to the new VLAN on Cluster Member A. Configure the new VLAN manually on Cluster Member B. Reset the Device Trust of the BIG-IP Cluster on either Cluster Member.

The BIG-IP Administrator has to provide encrypted communication between the users and the virtual server they access. Multiple hostnames are configured in DNS with the same IP address. Which profile type and setting in the profile should be used?. Client SSL, Client Name. Server SSL, Client Name. Server SSL, Server Name. Client SSL, Server Name.

The BIG-IP Administrator is investigating if better TCP performance is possible for a virtual server. Which built-in profile should be tried first?. f5-tcp-legacy. f5-tcp-mobile. f5-tcp-progressive. f5-tcp-wan.

A BIG-IP Administrator is creating a new Trunk on the BIG-IP device. What objects should be added to the new Trunk being created?. IP addresses. Network routes. VLANs. Interfaces.

In the BIG-IP Configuration Utility, a user requests a single screen view to determine the status of all Virtual Servers and associated pool members, as well as any iRules in use. Where should the BIG-IP Administrator instruct the user to find this view?. Local Traffic > Monitors. Statistics. Local Traffic > Virtual Servers. Local Traffic > Network Map.

Which two load balancing methods consider all the connections the BIG-IP has between it and each backend application server (Pool Member) when making a load balancing decision for a new connection?. Least Connections (node). Ratio (member). Round Robin. Weighted Least Connections (node).

A BIG-IP Administrator is configuring an SSH Pool with five members. Which Health Monitor should be applied to ensure that available pool members are monitored accordingly?. UDP. HTTP. HTTPS. TCP.

Local Traffic Network Map: VS_HTTP → POOL_WEB → 192.168.212.30:80 Pool Member | Parent Node 192.168.212.30 Port 80 Whyis the virtual server unresponsive to incoming connections?. The node monitor failed. The pool member monitor failed. The pool member is disabled. The node is disabled.

Whatwould be the bestpersistence method for F5 to load balance traffic from clients via a single source IP (NAT) to multiple pool members with even distribution for an HTTPS web application?. Destination address affinity persistence. Cookie persistence. SSL persistence. Source address affinity persistence.

To increase available bandwidth of an existing Trunk, the BIG-IP Administrator is adding additional interfaces. Which command should the BIG-IP Administrator run from within the bash shell?. tmsh create /sys trunk trunk_A interfaces add {1.3 1.4}. tmsh create /net trunk trunk_A interfaces add {1.3 1.4}. tmsh modify /sys trunk trunk_A interfaces add {1.3 1.4}. tmsh modify /net trunk trunk_A interfaces add {1.3 1.4}.

The BIG-IP Administrator has configured an HTTP health monitor applied to a Pool of HTTP web servers hosting www.f5.com, but all Pool Members show a DOWN status. The web server is returning a response of '400 Bad Request'. What would be the correct monitor Send string?. GET /healthmonitor.html HTTP/1.1 \r\nConnection: Close\r\n. GET /healthmonitor.html HTTP/1.1 Connection: Close. GET /healthmonitor.html HTTP/1.1 \r\nHost: www.f5.com\r\nConnection: Close\r\n\r\n. GET /healthmonitor.html HTTP/1.1\r\nConnection: Close\r\n\r\n.